HERSCHEL iQ T2 Wireless Thermostat Instruction Manual

1

2

3

4

5

6

7

8

9

Select XLS  

Herschel iQ Heating Controls  

T2 wireless thermostat  

Installation and operating instructions  

T2  

R2  

Technical Information  

Power supply T2:  

Installation:  

Setpoint Range:  

Accuracy:  

Ambient temperature:  

Relative humidity:  

T2 Backlight:  

Sensor:  

Protection Class:  

Housing:  

Wireless:  

2 x AAA Batteries  

T2: Wall Mounted or free-standing  

5-35°C (temperature increments 0.5 °C)  

+/- 0.5 °C  

0 - 50 °C  

85%  

White  

NTC 10K  

IP20  

ARC+PC  

433Mhz (RF)  

35m  

7 day program, 4 periods per day  

Open Window, Adaptive Start  

Smartlife App Control  

Works with Alexa and Google Assistant  

when paired with the SmartLife App  

2 years  

Wireless Range:  

Programming:  

Energy saving:  

Warranty:  

Certifications:  

CE, RoHS, EMC, RED, LOT20  

Compliance  

Hereby, Herschel Infrared Ltd declares that the radio equipment type T2 Wireless Thermostat is  

in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is  

available at the following internet address:  

https://www.herschel-infrared-technology-center.com/compliance/  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	HERSCHEL iQ T2 Wireless Thermostat Instruction Manual
Make	HERSCHEL
Language	English
Filetype	PDF (Download)
File size	0.19 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• HERSCHEL

HERSCHEL iQ T2 Wireless Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: Herschel iQ Heating Controls T2 wireless thermostat Installation and operating instructions Power supply T2: Setpoint range: 5-35 °C (temperature increments 0.5 °C) Accuracy: +/- 0.5 °C Ambient temperature: 0 - 50 °C Relative humidity: 85% Wireless: 433Mhz (RF) Certifications: CE, RoHS, EMC, RED, LOT20
• Page 2: T2 Wireless thermostat Use in accordance with the EU and national regulations. For indoor use only. Keep your device completely dry. This product must be installed by a competent person and in accordance with all the EU and national regulations. The Herschel iQ T2 Thermostat & R2 receiver are designed to regulate Herschel Infrared Heaters and incorporate the latest energy-saving features. These include Herschel’s open window technology and an adaptive start function ensuring your room is always at the right temperature with the least energy use. When used with wifi you can also regulate your heating remotely using the SmartLife App. SmartLife also allows you to control the system by voice using Alexa or Google Assistant. The T2 features 7 x 1 day programming as well as Eco and Manual modes. The R2 is the switch that turns your heaters on and off and must be wired to the heaters and mains power. Each R2 can handle up to 10 amps, so you will need sufficient R2 units to control the overall heating load. Each R2 must be paired to a T2 to operate correctly. Pairing steps can be found in the instructions for the T2.
• Page 3: T2 Wireless thermostat Display & Buttons T2 Control Unit Installation T2 Stand-alone: Wall-mounted: Initial setup Insert 2 x AAA batteries into the T2.
• Page 4: T2 Wireless thermostat Pairing Instructions T2 to R2 Switch on the R2 using the power button. Confirm LED2 is green. Long press the Boost button until LED 1 flickers Red. Turn OFF the T2. Long press the MENU button until a code appears in the display. The code in the display will stop flashing and LED 1 on the R2 will stop flickering when pairing is complete. The first R2 paired to a T2 also becomes its internet Gateway. To pair additional R2s to a T2, switch on the R2 using the power button. Scan the QR code to download the Smartlife App from the App Store or Google Play. After installing and opening the Smartlife App, you must register an account using an email address and password.
• Page 5: T2 Wireless thermostat Pairing the R2 to the SmartLife App requires the R2 to be within range of the router. Your mobile phone must be connected to the 2.4GHz wifi signal. The pairing process will not work on a 5GHz wifi signal or cellular network. Add device by pressing the + button in the SmartLife App. Select “Small Home Appliance” and then “Thermostat.” Press and hold the BOOST button on the R2 until LED1 rapidly flickers red. Pairing is complete when the Red LED on the R2 stops flashing. The Smartlife App is constantly evolving, and future versions may differ from printed instructions. To clear all pairing, press the Power button and BOOST button together for 5 seconds. If the R2 loses wifi connection, LED 1 will flash red slowly.
• Page 6: T2 Wireless thermostat Time & Day setting Turn T2 on. Press the MENU button for 3 seconds until the minutes display flashes. Press the Up or Down arrow buttons on the display to change the value. Press the MENU button again to change the hour display. This is a 24 hour clock. Press the MENU button again to change the day. The T2 has 3 operating modes: Manual, ECO and Program Mode. Select Manual if you want to set and maintain one temperature all the time. Select ECO to economise on heat.
• Page 7: T2 Wireless thermostat Press MENU to display the ECO mode temperature and change it using the Up and Down buttons. “SET” is displayed indicating a change in the setting. Return to the main page by pressing the Return button. Selecting a mode with the MENU button overrides the schedule or current temperature setpoint. The T2 has a 7 x 1 day timer with 4 periods per day. Set period 1 as the first temperature of the morning, period 2 for daytime, period 3 for evening, and period 4 for overnight. Herschel Far infrared directly heats the room, making it more economical to avoid low temperatures. Recommended overnight setback temperatures are no lower than 14°C and daytime temperatures of 16°C and above. To select Program Mode, press MENU until PRG is displayed. Press the PRG button for 3 seconds to start the 7 x 1 day program setting.
• Page 8: T2 Wireless thermostat Press PRG again to move to the second period of the first day’s program. Temperature can always be overridden manually by pressing the Up and Down buttons. The temperature will remain at this setting until the next programmed change occurs. The T2 has several special operating parameters you can set. Temperature Calibration allows adjustment by up to 8°C. Open Window is an energy saving feature that turns off the heater(s) if a drop in temperature is detected. Adaptive Start is designed to smooth out heating consumption when large temperature jumps occur. Herschel’s adaptive start function will start the heater earlier if the temperature difference is more than 5°C. You can use Parameter Settings to turn off Adaptive Start totally.
• Page 9: T2 Wireless thermostat How to change parameter settings Press MENU and UP button together for 6 seconds to access parameters. Each parameter is changed by pressing the Up or Down button. Failsafe mode allows local control if the R2 loses wifi connection. The R2 remains in its current setting if it loses connection with the T2. 2 Year warranty covers defects in materials or workmanship. Warranty is for standard domestic use only, excluding commercial uses. Register your product at the Help & FAQs section of your local Herschel website. In the event of a warranty claim, follow the Warranty Claim process on the website. Note your serial number for warranty purposes.