Roth VVS-nr. 466397.058 Softline Standard Room Thermostat Instruction Manual

Roth VVS-nr. 466397.058 Softline Manual: Questions and Answers

How do I mount the Roth VVS-nr. on a wall or surface?

Mount on a flat surface using screws with maximum diameter 4 mm.

1. Ensure the surface is flat and level.
2. Use screws with maximum diameter Ø 4 mm.
3. Alternatively, mount using the included DIN rail. Instruction Manual, p. 2

Can I connect a 4 channel extension module to the Roth VVS-nr. 466397.058 Softline?

Yes. Connect the 4 ch extension module using the delivered BUS cable to the BUS input on the master Controller, and verify the jumper is positioned correctly in both units. Instruction Manual, p. 6

How do I set up the Roth VVS-nr. 466397.058 Softline to pair room thermostats?

Connect to 230V power. The Controller is then ready for pairing of sensors.

1. Connect the Controller to a 230V power outlet.
2. Follow the pairing instructions in this manual or the manual delivered with the thermostat/sensor. Instruction Manual, p. 4

Why doesn't the pump activate when zone 2 calls for heat on the Roth VVS-nr. 466397.058 Softline?

The pump deactivates in a zone when its output is reassigned to another zone in Output configuration.

• If output 2 was moved from zone 2 to zone 1, zone 2 can no longer trigger the pump
• A heat-call on zone 2 will not activate the pump once its output is dedicated to zone 1
• Check the Output configuration menu to see which outputs are assigned to which zones Instruction Manual, p. 8

Is there documentation for setting up room thermostats and floor sensors with the Roth VVS-nr. 466397.058 Softline?

Yes. Refer to the manuals delivered together with the room thermostats and sensors for details on their settings and use. Instruction Manual, p. 11

More Roth thermostat manuals

• Roth Basicline
• Roth Basicline 230T Clock
• Roth Basicline H
• Roth IR SL Room Thermostat