Innova B3V151 Electronic Thermostat User Manual

InnOVA B3V151 Manual: Questions and Answers

What's the difference between heating and cooling mode on the InnOVA B3V151?

Heating mode activates when setpoint is higher than room temperature. Cooling mode activates when setpoint is lower than room temperature. User Manual, p. 13

What does dew on the front panel of the InnOVA B3V151 mean?

Detached thermal insulation or high humidity above 60% can cause condensation. Check that thermal and acoustic insulation, especially on top of the finned coil, are properly positioned. User Manual, p. 16

Can the InnOVA B3V151 lose water during heating mode, and what causes it?

Yes. Leaks occur at hydraulic connections due to loose fittings or worn gaskets. Check and tighten connections, then inspect gasket condition. User Manual, p. 16

What do water drops on the air vent of the InnOVA B3V151 mean?

High humidity over 60% generates condensation. The condensate tray may be clogged or the drain pipe lacks proper slope. User Manual, p. 16

How often should I clean the filter on my thermostat?

Every six months during routine maintenance. Also clean after prolonged operation depending on air impurity levels, and before restarting after extended disuse. User Manual, p. 17

What's the best way to clean a thermostat air filter?

Use a vacuum cleaner to aspirate dust, then wash with running water and allow it to dry completely. User Manual, p. 18

How do I turn on the InnOVA B3V151 thermostat for the first time?

Press and hold the power key for 2 seconds to activate the touchpad.

1. Keep the power key pressed for 2 seconds.
2. The text appears on the display.
3. The device turns on.
4. The preset set-point appears on the 3 digits of the display. User Manual, p. 9