Innova B3V151 Electronic Thermostat User Manual
M7 SERIES COnTROLS EEB749 - EFB749 - EGB749
4ꢀ2 Main functions
4ꢀ2ꢀ1 General start-up
4ꢀ2ꢀ5 Heating only mode
Before the activation:
To select the Heating operation
Make sure that the remote control is connected to the
ꢀ
► press
The symbol
enable.
The device heats the room.
for about 2 seconds
mains.
on indicates the Heating function
In case of a master switch on the power supply line,
ꢀ
switch on the system by inserting the switch.
In heating function the symbols is alight with setpoint
ꢀ
To activate the control
higher than the room temperature.
► press the
key for about 2 seconds
The text
appearing on the display.
The device turns on.
4ꢀ2ꢀ6 Automatic operation
To select the Automatic function
4ꢀ2ꢀ2 Put in stand-by the control
► press the
The symbol
enable.
key for about 2 seconds
on indicates the Automatic function
Toꢀputꢀinꢀstand-byꢀtheꢀcontrol
► press the
key for about 2 seconds
The symbol
appears
The ventilation speed is automatically adjusted between
ꢀ
The control goes out.
a minimum value and a maximum value based on an al-
gorithm type pI, according to the actual distance from
the room temperature set-point.
In stand-by mode the control ensures an antifreeze
ꢀ
safety. In case of temperature <5 °C, the hot water so-
lenoid valve outputs and boiler consent are activated
automatically.
4ꢀ2ꢀ7 Minimum mode operation
To select minimum mode operation
4ꢀ2ꢀ3 Set room temperature
► press the
key for about 2 seconds
The symbol on indicates that fan operation in
minimum mode.
Toꢀset-upꢀtheꢀtemperatureꢀ
► operate the
keys to decrease or increase
the desired value
In this mode the fan is set to minimum speed.
ꢀ
The displayed value change.
The adjustment range goes from 16 °C to 28 °C, with a
ꢀ
4ꢀ2ꢀ8 Maximum ventilation speed
resolution of 0,5 °C.
To select the operation at the maximum ventila-
Out of range values from 5 °C and 40 °C are allowed,
ꢀ
tion speed
except in automatic mode. These value should be set
only for short periods of time.
► press the
key for about 2 seconds
The symbol
function enable
on indicates the maximum speed
4ꢀ2ꢀ4 Cooling only mode
Maximum power output is immediately obtained both
ꢀ
in heating and cooling.
To select the Cooling operation
After reaching the desired room temperature, select a
ꢀ
► press
for about 2 seconds
different function to increase the thermal and acoustic
The lighted
symbol in the display area indicates
comfort.
that the Cooling function is activated.
The device dehumidifies and cools the room.
In cooling function the symbols is alight with setpoint
4ꢀ2ꢀ9 Set the key lock
ꢀ
lower than the room temperature.
Toꢀset-upꢀtheꢀkeyꢀlocking
► press both keys
for 3 seconds
Appears
.
All settings are inhibited by the user.
ꢀ
Repeat the sequence to unlock the control.
ꢀ
4ꢀ3 Basic menu
To access the basic menu
► keep pressed until the indication
appears
► with the display off, hold down
for 10 seconds
► release the
key
The device turns on and
appears
The symbol
appears
13
| General | Details |
|---|---|
| Name | Innova B3V151 Electronic Thermostat User Manual |
| Make | InnOVA |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.77 MB |
(1 votes, average: 5.00 out of 5)
Loading...
DOMETIC 3313192.XXX Single Zone LCD Thermostat Instruction Manual
Vine Smart Wi-Fi Thermostat with Nightlight TJ-225 User Guide
SALUS CONTROLS RT520 Thermostat User Manual
Beca BAC-7000 Smart Knob Thermostat User Guide
GENERAL Life ARUNA 300S RF Wireless Room Thermostat User Guide
Hotwire HWGL2 Dual Programming Thermostat Instructions
GENERAL SENNA 270S Smart Room Thermostat User Manual
ENGO EASYBATB Wired Battery Thermostat User Guide
EUROLAMP HY06BW Digital Heating Smart Thermostat User Manual
LATICRETE 0804-0402-TW Programmable LCD Thermostat Instruction Manual