Home > Robertshaw > Robertshaw RS8110 Non Programmable Thermostat Instruction Manual
Robertshaw RS8110 Non Programmable Thermostat Instruction Manual
CALIBRATION SETTING
To access the CALIBRATION setting and adjust the temperature, select OFF
+
-
-
+
and hold down and together for 3 seconds. Use and to adjust the
temperature from between -4°F and +4°F.
-
Press to select F (Fahrenheit) or C (Celsius), and press to select the
temperature scale.
+
-
Then press to access the compressor short cycle DELAY setting. If the
compressor short cycle delay setting is ON, the compressor cannot be
-
+
turned on for at least 3 minutes after it was last turned off. Use and
to adjust the compressor short cycle delay setting to ON or OFF. Wait
approximately 15 seconds or toggle the system switch to return to
normal operation.
8
| General | Details |
|---|---|
| Name | Robertshaw RS8110 Non Programmable Thermostat Instruction Manual |
| Make | Robertshaw |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.12 MB |

Robertshaw RS9220 Programmable Thermostat Installation Guide

Robertshaw RS10420T WIFI Programmable Thermostat User Guide

Robertshaw RS8210 Thermostat Installation Guide

Robertshaw RS8210 Non-Programmable Multi-Stage 2H-1C Wall Thermostat User Manual

Robertshaw RS9220 Digital Programmable Wall Thermostat Instruction Manual

Robertshaw 9602 Programmable Thermostat User Manual

Robertshaw RS9320T Programmable Touchscreen Wall Thermostat Instruction Manual

Robertshaw RS9423T Thermostat Installation Guide

Robertshaw RTC500 WIFI Thermostat Instruction Manual

Robertshaw RS1110 Programmable 1 Heat 1 Cool Wall Thermostat Instruction Manual

























