PURMO M16MI419 Advanced Thermostat Instruction Manual
EN
The Boost can stop for 2 different reasons:
Mode overview
Display
- An order "Stop" has been sent by your energy manager through the
pilot wire:
2
Programming by pilot wire
If you do not want to use the programming feature.
Orders sent by the pilot wire will only be applied in Auto mode, thus your device
will automatically receive and apply the programmed orders sent by your
power manager or your time switches (see Information about remote control
by pilot wire page 10).
auto
prog
boost
•
Comfort mode
auto
auto
auto
prog
prog
prog
Non-stop Comfort mode. The device will
operate 24 hours a day to achieve
the temperature which has been set (e.g.
19°C). The Comfort mode temperature le-
vel can be set by the user (see Setting the
comfort mode temperature page 6).
mode
OK
The device stops, -- appears. The cursor moves above auto. When the
order Comfort will be sent, the device will be restarted until the count
end.
- If the ambient temperature reaches the maximal Boost temperature
during the count:
•
Eco mode
Eco, which means the Comfort Mode tem-
perature minus 3.5°C. This enables you to
lower the temperature without having to
reset the Comfort Mode temperature.
Select this mode for shortterm absences
(between 2 and 24h ) and during the night.
auto
prog
boost
mode
OK
•
Frost protection mode
This mode enables you to protect your
home against the effects of cold weather
(frozen pipes, etc.), by maintaining a mini-
mum temperature of 7°C
The device switches off but the Boost mode is always active : the count
is always displayed, the Boost symbol and the heating indicator flash on
the display. When the temperature drops under the maximal authorised
temperature, the device will be restarted until the count ends.
in it at all times. Select this mode when
you will be away from your home for a
long time (more than 5 days).
- Second press = Boost cancellation.
The cursor moves above the previous active mode and the setting tem-
perature appears.
Restoring factory settings See page 14,16 and 19.
GAUGE CONSUMPTION, ENERGY SAVINGS
BOOST FEATURE
Important: the Boost mode can be enabled at any time, whatever the
current operating mode (Auto, Comfort, Eco or Frost protection).
boost
FRANCE’S AGENCY FOR ENVIRONMENT AND ENERGY MANAGE-
MENT (ADEME) RECOMMENDS A COMFORT SETTING TEMPERATURE
LOWERR OR EQUAL TO 19°C.
In the device display, a selector indicates the energy comsumption level
by positioning it in front of the colour: red, orange or green. So, depen-
ding on the setting temperature, you can choose your level of energy
usage. As the temperature setting
To activate Boost mode, press
, the desired temperature setting will
be set at maximum for the time period you request. 60 minutes display
will flash by default.
increases, the consumption will be higher.
- First press = Boost.
During the first minute: the boost symbol and the heating indicator ap-
pear and the duration count flash.
The gauge appears in Auto, Comfort, Eco and Frost protection modes
and whatever the temperature level.
C - Red colour
Setting temperature
auto
prog
auto
prog
High Temperature
level: it is advisable to
significantly reduce
the setting tempera-
ture.
> 22°C
When the setting
temperature is higher
than 22°C
boost
mode
OK
19°C < Setting tem-
perature ≤ 22°C
B - Orange colour
Average temperature
level: it is advisable
to slightly reduce the
setting temperature.
auto
prog
During the first minute, you can modify the Boost duration from 0 to the
maximal authorised duration of the Boost, such as
defined during the advanced settings (see page 13 for more details) by
intervals of 5 minutes (or more quickly by push superior to 2 seconds) by
When the setting
temperature is higher
than 19°C and lower
or equal to 22°C
pressing
and
. This modification will be saved and effective for
the next Boost.
After 1 minute, the Boost count begins and the time is running,
minute by minute.
Setting temperature
≤ 19°C
When the setting
temperature is lower
or equal to 19°C
auto
prog
Comment: After 1 minute, you can modify temporarily the duration: it
will be valid only for this active Boost and therefore non-recurring.
A - Green colour
Ideal temperature.
4
| General | Details |
|---|---|
| Name | PURMO M16MI419 Advanced Thermostat Instruction Manual |
| Make | PURMO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.02 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Honeywell Home T822 Series Heat Thermostat Owner’s Manual
Wengart WG603 Home Smart Thermostat User Guide
telethings teleRelays-2L Device Thermostat User Manual
GE APPLIANCES RAK190V 2 Way Energy Management Thermostat Instruction Manual
Honeywell ATC928 Evohome Connected Multi Zone Room Thermostat Installation Guide
Honeywell TL7135A Non-Programmable Thermostat User Guide
MRCOOL Mini-Stat WiFi Thermostat User Manual
HYSEN HY511 WiFi Heating Thermostat Owner’s Manual
ENGO CONTROLS E901-RF Programmable Wireless Thermostat Instruction Manual
DELTA DORE TYBOX 1117 Programmable Thermostat User Guide