PURMO M16MI419 Advanced Thermostat Instruction Manual
EN
RESTORING FACTORY SETTINGS
Settings
Occupancy detection
Dual optimization feature
PIN code protection
Factory settings
Enabled
Opti comfort
Disabled
0000
If the PIN code protection is disabled, the user, installer and expert set-
tings are re-initialized:
Value of the PIN code
1- From the Power setting setting, press
. rest appears on the dis-
play.
Experts settings
Power
500W
auto
prog
To exit the Expert settings, press
3 times.
boost
mode
OK
TECHNICAL
SPECIFICATIONS
2- NO appears. Press
or
to select YES.
General specifications:
auto
prog
- Operating voltage: 230V +/-10% 50Hz.
- Maximum power of 1500W, resistive load.
- Power supply cable: 800mm, 3 Conductors.
- Radio frequency: 2,4035 Ghz/ 2,4055 Ghz / 2,4075 Ghz.
- Maximum RF power transmitted: <1mW.
- Standby consumption : <0.5W.
boost
mode
OK
- Electronic PID (Proportional Integral Derivative) control, triggered by a
triac.
yes
=
Factory settings reset
NO = Factory settings not reset
3- Press the key for 5 seconds. The device returns to its initial confi-
guration and goes back automatically to the Auto mode.
Compliance declaration: we hereby declare under our
sole responsibility that the products described in these
instructions comply with the provisions of Directives and
harmonized standards listed below:
- RED 2014/53/EU:
Article 3.1a (Safety): EN60335-1/ EN60335-2-30/ EN60335-2-43/
EN62333;
auto
prog
Article 3.1b (EMC): ETSI EN301489-1 / ETSI EN301489-3;
Article 3.2 (RF): ETSI EN 300440;
boost
- ERP 2009/125/CE;
- Regulation 2015/1188/UE;
- ROHS 2011/65/EU: EN50581
and are manufactured using processes which are certified ISO 9001
V2008.
mode
OK
5 sec.
The following factory values will be effective:
The symbol
affixed on the product indicates that you must dispose
Settings
Factory settings
of it at the end of its useful life at a special recycling point, in accordance
with European Directive WEEE 2012/19/EU. If you are replacing it, you
can also return it to the retailer from which you buy the replacement
equipment. Thus, it is not ordinary household waste. Recycling products
enables us to protect the environment and to use less natural resources.
Operating
Comfort setting temperature
19°C
Boost duration
60 min.
Disabled
Keypad lock
User settings
Backlighting
L3
Eco mode temperature lowering-
level
-3,5°C
7°C
Frost protection temperature
Minimum set of Comfort setting
temperature
7°C
Maximum set of Comfort setting
temperature
30°C
Maximal Boost duration
60 min.
Maximum ambient temperature
for the automatic stop of the
Boost
39°C
Temperature unit
°C
Installer settings
Automatic open window
detection
Enabled
12
| General | Details |
|---|---|
| Name | PURMO M16MI419 Advanced Thermostat Instruction Manual |
| Make | PURMO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.02 MB |
(1 votes, average: 5.00 out of 5)
Loading...
LuxPro PSPLV512d Programmable Heating Thermostat Instruction Manual
Fantini Cosmi CH121E Flush Mounting Thermostat User Manual
aube technologies TH110A-DP-P Thermostat User Manual
GENERAL LIFE 270S RF Room Thermostat User Manual
DAEMA ELECTRONIC DFZ-1310SL 130L Freezer with Adjustable Thermostat Owner’s Manual
Danfoss VIMCA20F 24V RT Room Thermostat Installation Guide
Pro1 Technologies T751 Non-Programmable Digital Thermostat Instruction Manual
tado Smart Thermostat V3+ User Guide
SALUS HTR230 Dial Thermostat User Manual
BEOK CONTROLS TDS72 Digital Screen Thermostat Instruction Manual