GENERAL LIFE HT220 Wired Room Thermostat User Manual

1

2

ROOM THERMOSTAT PLACEMENT  

ROOM THERMOSTAT WIRING DIAGRAM  

ENGLISH  

Room Thermostat needs to be placed in the room which is used most  

frequently. For instance; living room or lounge. Placing the Room  

Thermostat in a spot that have air circulation like entrance of a room  

or side of window should be avoided. Also anywhere close to  

heating/cooling units such as radiator, stove and spots which get  

direct sun lights would not be suitable. Room Thermostat needs to be  

located above the floor 150 cm height. Few trials may be made to find  

themostconvenientspot.  

HEATING/COOLING UNIT  

DIGITAL ROOM THERMOSTAT  

generallife.com.tr  

SERIES:  

MITRA, ARUNA, ILLONA, THERMA  

HT220/HT220S/HT230S USER MANUAL  

GENERAL SPECIFICATIONS  

HT220/HT220S/HT230S is a wired room thermostat. The user can  

adjust the room temperature with the required temperature and get  

morecomfortable and economic heating/cooling.  

NO COM  

min. 20 cm  

DIGITAL ROOM THERMOSTAT  

Warning!  

Operations within the heating  

/

cooling unit or the electrical  

installationmustbecarriedout byprofessionally qualified persons.  

 PreciseTemperatureMeasurement  

 Heatingcalibration  

 Heating/Cooling Modes  

ON/OFFControl  

WiredConnection  

TPIAlgorithm  

ROOM THERMOSTATTEMPERATURE CALIBRATION  

Temperature sensors which are used in Room Thermostats are highly  

sensitive. You may need to calibrate your Room Thermostat if you  

would like to get the same temperature values with other  

thermometersinyourliving space.  

SERIES:  

MITRA, ARUNA, ILLONA,  

THERMA  

HT220/HT220S/HT230S AND EQUIPMENTS  

 While your device is turned off, press and hold the button for 3  

seconds.  

Room Thermostat  

Alkaline Battery  

Dowels and Screws  

 Press the button until the “  

” menu appers. In order to see the  

HT220/HT220S/HT230S  

USER MANUALS  

desired temperature, set the temperature difference by turning the  

button to right or left. This valuecan be arranged between “-8^oC" and  

“+8^oC".  

BATTERY PLACEMENT  

Before starting, power off the device connected to the Room  

Thermostatand makesurethattheenergy iscutoff.  

 To save the settings and exit, press the "On/Off" button until the  

deviceturnsoff.  

TECHNICAL DATA  

Dimensions  

Note:Recommended tempreturecalibrationis“0.0^oC”.  

85mm / 125mm / 24mm  

Operating Current  

Relay NO Switching Current  

3V DC (2 x AAA alkaline battery)  

2A/30VDC (Resistive load)  

0.5A/125VAC (Resistive load)  

0.1^oC  

ROOM THERMOSTAT HEATING / COOLING MODES  

Your Room Thermostat has heating and cooling modes. In order to  

switcheasilybetweenheating and cooling modes:  

 While your device is turned off, press and hold the button for 3  

seconds.  

Temperature Measurement  

Accuracy  

Operating Temperature Range  

Battery Life  

Operating Temperature  

Storage Temperature  

(5^oC) – (30^oC)  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

 Pressthebutton until the“  

”menu appears.  

” (heating) and “  

 You can switch between “  

” (cooling) modes  

”menu.  

byturning thebutton torightorleftinthe“  

 To save the settings and exit, press the button until the device turns  

off.  

 The settings you have made have been saved. Once you turned on  

yourdevice, itwilloperatewiththechanged settings.  

ROOM THERMOSTAT  

1

As shown in the picture above, press the screwdriver forward from the  

space shown, bend the tabs and separate the front cover. Insert 2 new  

AAA alkaline batteries in the battery housing with the correct battery  

direction. Replace both batteries at the same time. Then align the  

front part of your Room Thermostat to the back and squeeze it  

towards theback.  

Low Battery Warning: When the “ ” icon appears on the screen, it  

means “low battery warning”. It is recommended to replace the  

batterieswhen thiswarning appears.  

2

3

FACTORY SETTINGS RESET  

You can reset your Room Thermostat to its default factory settings.  

This operation resets the calibration setting and heating/cooling  

modes to factory setting. To reset your Room Thermostat to factory  

setting:  

 While your device is turned off, press and hold the button for 3  

seconds.  

4

5

6

 Pressthebutton untilthe“  

 While in the “ “ menu, turn the button to right or left in order to  

select“ “option and pressthebutton.  

”menu appears.  

Warning: When the product is not used for a long period (more than 15  

days), remove the batteries. Otherwise, malfunctions that may occur  

would beoutofwarranty.  

1

2

Battery Indicator  

Heating Indicator  

- If the Heating Indicator is blinking, the heating unit is  

 Your devicewillbeturnedoff and resettofactorysettings.  

Pleasethrowyourdead batteriesinto thewastebin forbatteries.  

working.  

- If the Heating Indicator is steady, the heating unit is not  

working.  

Cooling Indicator  

- If the Cooling Indicator is blinking, the cooling unit is  

working.  

3

- If the Cooling Indicator is steady, the cooling unit is not  

working.  

Room Temperature  

Set Temperature  

ON/OFF and Temperature Setting Button  

4

5

6

generallife.com.tr  

2

1

3

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE HT220 Wired Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	1.85 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE HT220 Wired Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Room thermostat needs to be placed in the room which is used most frequently. Placing the room thermostat in a spot with poor air circulation should be avoided. Room thermostat needs to be located above the floor at a height of 150 cm. HT220/HT220S/HT230S is a wired room thermostat. Operations within the heating/cooling unit must be carried out by professionally qualified persons. Temperature sensors used in room thermostats are highly sensitive. Recommended temperature calibration is “0.0°C”. You can reset your room thermostat to its default factory settings. When the low battery icon appears, it is recommended to replace the batteries. If the heating indicator is blinking, the heating unit is working.
• Page 2: Warranty conditions state that the warranty period starts from the invoice date and covers manufacturing defects for 2 years. If the placement of the TPI Room Thermostats is changed or if they are de-energized, the learning process will restart and should be considered as 7 days. The TPI algorithm predicts temperature changes to maintain the set temperature with minimal deviations. Devices are delivered in working condition, and on-site commissioning incurs a service fee. Repairs under warranty are conducted at the company factory, with transportation costs borne by the customer for on-site services. Malfunctions caused by customer actions are not covered by the warranty, and customers must report any damages to maintain their warranty rights. Battery leakage and damages from using devices with other brands are not covered by the warranty. The warranty is void if devices are damaged by the customer or if malfunctions are caused by external factors like natural disasters. The maximum repair time is 20 working days, and if not repaired within this time, a similar product must be provided for use. Customers can appeal to consumer courts regarding warranty issues, and the warranty document must be retained throughout the warranty period.