Netatmo NTH01-AMZ Energy Saving Smart and Connected Thermostat Instruction Manual

Netatmo NTH01-AMZ Manual: Questions and Answers

How do I test if my Netatmo NTH01-AMZ Relay has power?

Disconnect the Relay, wait 10 seconds, then reconnect it. The LED should flash 5 times quickly. Instruction Manual, p. 1

What does the LED on the Netatmo NTH01-AMZ Relay indicate when powered on?

The LED flashes 5 times quickly to show the Relay has started and is ready for use. Instruction Manual, p. 1

What do the plus and minus buttons do on the Netatmo NTH01-AMZ?

They increase and decrease the setpoint temperature. Press firmly; the buttons are not touch sensitive. Instruction Manual, p. 6

What does it mean when the LED on the Netatmo NTH01-AMZ Relay flashes 5 times?

The Relay has just been powered on and is functioning correctly. Instruction Manual, p. 7

Which wire goes into port L or P on the Relay for the boiler adapter?

The brown wire from the boiler adapter's power supply. Insert the blue wire into port N.

Instruction Manual, p. 10

Does the order of the two thermostat control wires matter when inserting them into the boiler ports?

No polarity order exists. Insert one wire into each designated port. Instruction Manual, p. 10