Munters RDT-5 Triple Phase Digital Thermostat User Manual
CAUTION
When powering the RDT-5, the L1, L2, and L3 ports must be fed from
different power sources, phases, or breakers.
LARM
5.2.5 A
IRING
W
Figure 10: Alarm Port Wiring
An alarm is triggered when:
either the primary or secondary power source fails
•
•
•
a sensor is shorted or fails to operate
the CPU fails
Note that even if the CPU ceases to operate, the RDT-5 continues to function. The CPU
does not run the unit; it is used only to enter the unit parameters.
LATINUM
IRING
– RDT-5 W
5.2.6 P
The RDT-5 can be wired directly to the Platinum’s digital input card. In this configuration,
RDT-5 can provide two functions:
The Platinum transmits an alarm to a PC in the event of a RDT-5 power or sensor
failure. In this configuration the RDT-5 functions when the Platinum has a
problem with its:
•
o
o
o
relays
breakers
sensors
The Platinum transmits an alarm when RDT-5 activates one of the stages
While both of these functions are optional, Munters strongly recommends
wiring the RDT-5 to Platinum Controllers.
•
CAUTION
© Munters AB, 2021
18
| General | Details |
|---|---|
| Name | Munters RDT-5 Triple Phase Digital Thermostat User Manual |
| Make | Munters |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.5 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Drayton RF902 Digistat 3rd Generation Wireless 2-Channel Programmable Thermostat Installation Guide
Honeywell VisionPRO Series 7 Day Programmable Thermostat User Guide
STELPRO SIBTE13F Electronic Thermostat User Guide
ESP ECSPST Fort Programmable Thermostat User Manual
ESi Controls ESRTERFW Wireless Digital Room Thermostat Installation Guide
Glow-Worm SRT 50-2 Climastat Select Programmable Room Thermostat User Manual
American Standard ACONT102 Non Programmable Thermostat User Guide
WHITE-RODGERS 1F75H-21PR Programmable Thermostat Owner’s Manual
Honeywell TL5110 Digital Non-programmable Thermostat User Guide
Danfoss TP7000 Series Electronic 7 Day Programmable Room Thermostat Instruction Manual