HIVE 81351 Thermostat Mini for Heating Installation Guide
Hive Thermostat Mini Installation Guide
3f
Stand-alone installations (without Hub)
For Hive Active Heating a Hub, a Receiver and a thermostat are installed. When this service hasn’t
been bought, the thermostat and Receiver can also be installed without a Hub. This is known as
‘stand-alone’ mode.
Follow the steps in the next section if the thermostat and Receiver are to be installed without a Hub
in ‘stand-alone’ mode.
In ‘stand-alone’ mode the thermostat acts as a standard wireless thermostat without the remote
heating control features and functionality of Hive Heating. Whilst you can set target temperatures
on the Hive Mini and change mode, you cannot configure and edit schedules. This functionality
requires a Hub and app.
Activating stand-alone mode
1
Remove the batteries from the thermostat.
Switch off the boiler and Receiver.
2
3
Wait at least 5 seconds, then turn the boiler and Receiver back on.
The Receiver’s status light will begin to flash AMBER.
4
5
Press and hold the heating button for at least 10 seconds until the status light begins to flash
WHITE. The Receiver is now in ‘stand-alone’ mode and is searching for a thermostat.
Insert the batteries into the thermostat, press and hold down the Menu/Confirm
arrow icons and follow the factory reset instructions on screen. After about 10 seconds,
and Down
‘Welcome to Hive Active Heating’ and ‘Searching…’ will be displayed on screen. If the thermostat
shows ‘Reconnecting’, then try steps 1 and 5 again.
To switch back to ‘Connected mode’
A. Switch the Hub off and then on again. If it begins to flash AMBER continue on to step B.
If all the lights go out and the Hub does not flash AMBER.
B. Press the button on the back of the Hub for 1 second. The Hub should now begin to flash AMBER.
C. Now follow steps 1–5 on page 12 but note that the lights will be different. At step 3 the Receiver’s
status light will initially flash WHITE/PINK and in step 4 it will change to AMBER (for Connected
mode) once you have held the
Central heating button down.
D. At any time, you can check what mode the Receiver is set to by switching it off then on.
When power is restored, the status light will flash for 5 seconds, AMBER for Hive Active
Heating, WHITE for ‘stand-alone’ mode.
12
| General | Details |
|---|---|
| Name | HIVE 81351 Thermostat Mini for Heating Installation Guide |
| Make | HIVE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.35 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HIVE HAH2INSTAMZ-01 Active Heating Thermostat User Guide
HIVE SLT3 Thermostat User Guide
HIVE 852031 Mini Wireless Heating Smart Thermostat Instructions
HIVE Thermostat for Heating Owner’s Manual
HIVE Thermostat Mini User Guide
HIVE Cheap Smart Thermostat User Guide
Hive B011B3J6B8 Active Heating Thermostat Owner’s Manual
GENERAL Life ARUNA 300S Wired Room Thermostat User Guide
network thermostat X-Series Ethernet Thermostat Instruction Manual
WATTS 563 WiFi Thermostat User Manual
EPH CONTROLS CP4 Programmable RF Thermostat User Manual
HASWILL ELECTRONICS STC-200 Thermostat User Guide
HYSEN HY510 WiFi Heating Thermostat Instruction Manual
EPH Controls RFCP-RFCA RF Cylinder Thermostat Instruction Manual
COPELAND ST55 Sensi Smart Thermostat Instruction Manual
LEHNER VERSAND 01477 Easymaxx Digital Radiator Thermostat User Manual
EVOLVEO Thermal Smart Wireless Programmable Thermostat Owner’s Manual