HIVE 81351 Thermostat Mini for Heating Installation Guide
Hive Thermostat Mini Installation Guide
2
Mount the Receiver
Important information: Before you get started
• Before fitting, isolate the mains electricity supply to the central heating system. Confirm it is
isolated and secured in the off position for the duration of the installation. Remember to always
follow appropriate safe electrical isolation procedures and test to confirm that the supply is isolated
before touching any electrical connections.
• This product should only be installed by an electrically skilled person competent in the installation
of electrical accessories.
• The Hive Receiver is double insulated, so it doesn’t need an earth connection. You’ll find a tether on
the backplate to secure an earth wire if needed.
• This product is designed for fixed wiring installation only. It must be supplied via a switched fused
spur with a minimum contact separation of 3mm (both live and neutral) and fitted with a 3A fuse.
• Replacing existing controls: If there’s an existing single zone timer or wireless Receiver, you should
remove it completely and wire in the Hive Receiver in its place. If needed, you can use a stand-off
plate (SP, supplied separately) to create space to accommodate existing wiring or use a decoration
plate (DP) when replacing a larger controller.
• Replacing an existing thermostat: If you’re replacing an existing wired thermostat, you should
ensure that the pre-existing wires and connections are made safe. This can be achieved by
disconnecting or bridging out the wired thermostat in the wiring centre or boiler. Where cables are
left at the wireless thermostat position, they should be housed and terminated within an enclosure
to prevent access. If you’re replacing an existing wireless thermostat, decommission it by detaching
it from the wall and removing its batteries.
• The Receiver should be placed near the boiler or central heating system, and at least 30cm from
large metal objects to prevent interference. Avoid buried cables and pipes.
6
| General | Details |
|---|---|
| Name | HIVE 81351 Thermostat Mini for Heating Installation Guide |
| Make | HIVE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.35 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HIVE HAH2INSTAMZ-01 Active Heating Thermostat User Guide
HIVE SLT3 Thermostat User Guide
HIVE 852031 Mini Wireless Heating Smart Thermostat Instructions
HIVE Thermostat for Heating Owner’s Manual
HIVE Thermostat Mini User Guide
HIVE Cheap Smart Thermostat User Guide
Hive B011B3J6B8 Active Heating Thermostat Owner’s Manual
EMERSON ST765470 Digital Thermostat User Manual
COOKING PERFORMANCE GROUP 351030208 Retrofit Thermostat Instructions
INTIEL Controllers DT 3.1 Programmable Differential Thermostat User Guide
Honeywell T7350 Programmable Thermostat Owner’s Manual
nVent RAYCHEM RayStat-M2 Thermostat Instruction Manual
COPELAND P-N 810-1600 Programmable Touchscreen Thermostat User Guide
PECO T372P Thermostat Instruction Manual
TCS SZ1051 Communicating Thermostat User Guide
micro-air EasyTouch RV 356 True Air RV Thermostat User Manual
GENERAL LIFE Therma 300S RF Wireless Room Thermostat User Manual