GENERAL LIFE Therma 300S RF Wireless Room Thermostat User Manual

1

2

ScreenIndicators  

BATTERY PLACEMENT  





If the pairing is successful, the green flashing LED on the receiver will be  

constant.  

ENGLISH  

1

2

3

4

Receiverand Room Thermostathavebeen pairedto eachother.  

10  

11  

DIGITAL ROOM THERMOSTAT  

ROOM THERMOSTATTEMPERATURE CALIBRATION  

12  

Temperature sensors which are used in Room Thermostats are highly sensitive.  

You may need to calibrate your Room Thermostat if you would like to get the same  

temperaturevalueswithother thermometersin yourliving space.  

5

generallife.com.tr  

6

7

8

9





While yourdeviceis turned off, pressand hold the"On/Off"button for 3 seconds.  

Press the "On/Off" button until the “ ” menu appers. In order to see the desired  

As shown in the picture above, press the screwdriver forward from the space  

shown, bend the tabs and separate the front cover. Insert 2 new AAA alkaline  

batteries in the battery housing with the correct battery direction. Replace both  

batteries at the same time. Then align the frontpart of your Room Thermostat to the  

backand squeezeittowardstheback.  

THERMA 300S RF USER MANUAL  

temperature, set the temperature difference by press the “Temperature  

AdjustmentButtons”. This valuecan be arranged between“-8^oC" and “+8^oC".  

To savethesettingsand exit, pressthe"On/Off" button until thedeviceturns off.  



GENERAL SPECIFICATIONS  

Note:Recommended tempreturecalibration is “0.0^oC”.  

1

2

3

4

5

6

7

8

9

Day Indicator  

Hours of Day  

Hour Indicator  

Screen Lock  

Low Battery Warning: When the “  

” icon appears on the screen, it means “low  

THERMA 300S RF is a wireless room thermostat. The user can adjust the room  

temperature with the required temperature and get more comfortable and  

economic heating/cooling.  

ROOM THERMOSTAT HEATING / COOLING MODES  

Your Room Thermostat has heating and cooling modes. In order to switch easily  

betweenheating and cooling modes:  

battery warning”. Itis recommendedto replacethebatterieswhen this warning  

appears.  

Room Temperature  

Set Temperature  

Economy Mode  

Comfort Mode  

Programming Mode  

Cooling Indicator  

- If the Cooling Indicator is blinking, the cooling unit is working.  

- If the Cooling Indicator is steady, the cooling unit is not working.  

Heating Indicator  

Warning: When the product is not used for a long period (more than 15 days), remove  

thebatteries. Otherwise, malfunctions thatmay occurwouldbeoutof warranty.  

Pleasethrowyourdead batteries into thewastebin forbatteries.  

 Dailyand WeeklyProgram(7x24)  







While yourdeviceis turned off, pressand hold the“On/Off” button for 3 seconds.  

Pressthe“On / Off” button until the“ ” menu appears.  

” (heating) and “ ” (cooling) modes by using the  

” menu.  

 DifferentMode Options (Comfort Mode and EconomyMode)  

 PreciseTemperatureMeasurement  

 Heating Calibration  

ON/OFFControl  

WirelessConnection  

TPIAlgorithm  

You can switch between “  

“Up” or "Down"buttons in the“  

RECEIVER PLACEMENT  

 Heating/Cooling Modes  





To save the settings and exit, press the “On / Off” button or wait 10 seconds until  

thedeviceturns off.  

10  

11  

The important things to note for the Receiver placement is  

avoiding physical contact between the Receiver and  

heating/cooling unit, and protectingit against materials such  

asliquid, dust etc.  

THERMA 300S RF AND EQUIPMENTS  

THERMA 300S RF  

Room Thermostat  

The settings you have made have been saved. Once you turned on your device, it  

willoperatewiththechanged settings.  

Holder  

Alkaline  

Battery  

- If the Heating Indicator is blinking, the heating unit is working.  

- If the Heating Indicator is steady, the heating unit is not working.  

Battery Indicator  

FACTORY SETTINGS RESET  

12  

You can reset your Room Thermostat to its default factory settings. This operation  

resets the mode temperature values, calibration setting, heating/coling modes and  

hysteresis settings to factory setting. To reset your Room Thermostat to factory  

setting:  

RECEIVER  

The devices should be placed in order to minimize the damage to the received and  

transmittedsignals bypayingattentiontothefollowingpoints;  





The devicesshould not be mounted on metalsurfaces.  

1-ManualOperationButton:  

1

2

3

The devices should not be installed close to electrical cables and electronic  

equipment such ascomputers and televisionunits.  

Deactivates the Receiver and allows you to use  

heating/cooling unit manually.  

2-PairingButton:  







While yourdeviceis turned off, pressand hold the"On/Off"button for 3 seconds.  

Dowels and Screws  

Receiver  

Pressthe“On/Off” button until “  

” menu appears.  







The devices should not be installed near large metal structures or other building  

materialsusing finemetalmeshes such as specialglass or specialconcrete.  

Distance between the Room Thermostat and the Receiver should not exceed 20  

metersor 2 floors.  

While in the “  

” menu, select the “  

” option by using “Up” or “Down” buttons  

Allows to pair the Receiver with the Room  

Thermostat.  

3-Receiver LED Light  

4-ReceiverPowerCable Input  

5-Heating/CoolingUnit ConnectionCable Input  

and pressthe“On/Off” button.  



Your devicewillbe turned off and resetto factory settings.  

Receivermust be installed atleast50cmawayfromtheheating/cooling unit.  

KEY LOCK  

In the Room Thermostat there is a key lock function to avoid any unintended  

contact.  

RECEIVER SETUP  







First, shut down your heating/cooling unit and your heating/cooling unit's power  

sourcewithallelectricalcurrent(fuse, socketetc.)  

TECHNICAL DATA  

Room Thermostat  

In orderto unlock the Room Thermostat's keylock “Mode”button should be pressed  

for 3 seconds. If buttons on Room Thermostat are not touched for 10 seconds, key  

lockwillbe reactivated.  

4

5

As shown in the connection diagram, connect one end of the heating/cooling unit  

connection cabletotheCOMand theother to theNOinput of theReceiver.  

Connect the other ends of the cable -which youconnected to the Receiverto room  

thermostat connection terminal as shown in your heating/cooling unit's user  

manual.  

Dimensions  

Operating Current  

Temperature Measurement Accuracy  

Operating Temperature Range  

Battery Life  

100mm / 160mm / 18.2mm  

3V DC (2 x AAA alkaline battery)  

RECEIVER LED DESCRIPTIONS  

0.1^oC  

Steady Red  

Receiver has power but Receiver and Room  

Thermostat are not paired.  

(5^oC) – (30^oC)  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

DAY AND HOUR SETTINGS  







While your Room Thermostat is on, keep pressing ''Settings'' button for  

seconds.  

3

Blinking Green  

Steady Green  

Waiting for pairing signal from the Room Thermostat.  

Receiver and Room Thermostat are paired.  

Heating/cooling unit is not operating.  

Operate the heating/cooling unit signal has  

reached to the Receiver.  

Heating/cooling unit is operating.  

Shut the heating/cooling unit down signal has  

reached to the Receiver.  

Operating Temperature  

Storage Temperature  







You must first connect the Receiver power cable to the Receiver and then to the  

fuse to which theheating/cooling unit is connected.  

At the first screen that appears ''Hour'' part will be blinking. You may set the time  

with“Up” and “Down”buttons.  

3 Short Orange  

Blinking  

Steady Orange  

3 Short Green  

Blinking  

After completing the cable connection process, firstly turn on your fuse and then  

yourheating/cooling unit.  

After setting the time, ''Settings'' button needs to be pressed once. For minute  

setting, minute part will be blinking. You may set the minute with “Up” and “Down”  

buttons.  

Receiver  

By pressing the Receiver's manual usage button for 2 seconds, you should see  

the Orange Light blinking on the Receiver. In this way, after making sure that the  

heating/cooling unit is operating, press the same button again for 2 seconds and  

seethattheOrange LEDturns off.  

Dimensions  

Operation Current  

Relay NO Switching Current  

90mm / 90mm / 25mm  

230V AC  

7A (240VAC – Resistive load)  

10A (120VAC – Resistive load)  

(-20^oC) – (+60^oC)  

Blinking Orange  

Heating/Cooling unit operates in manual mode.  



Aftersetting the minute, ''Settings'' button needs to be pressedonce to set the day  

of theweek.  

Blinking Red  

Receiver did not get any signal from the Room  

Thermostat for 22 minutes or longer.  

Heating/cooling unit has shut down.  

Storage Temperature  





Mondayhas setasthefirstdayof theweekand indicated withnumber “1".  

Numbers indicates the following days respectively 2-Tuesday, 3-Wednesday,  

4-Thursday, 5-Friday, 6-Saturdayand 7-Sunday  



Setup theRoom Thermostatto pair theReceiverwiththeRoom Thermostat.  

AC  

RECEIVER WIRING DIAGRAM  

ROOM THERMOSTAT  

Buttons Functions  

ROOM THERMOSTAT PLACEMENT  

COM  

NO  

(230V)  



When settingis done youmayexitbypressingfor 3 seconds to “Settings”button.  

Room Thermostat needs to be placed in the room which is used most frequently.  

For instance; living room or lounge. Placing the Room Thermostat in a spot that  

have air circulation like entrance of a room or side of window should be avoided.  

Also anywhere close to heating/cooling units such as radiator, stove and spots  

which get direct sun lights would not be suitable. Room Thermostat needs to be  

located above the floor 150 cm height. Few trials may be made to find the most  

convenientspot.  

MODE SETTTINGS  

MODES  

1

2

3

PRESET MODES  

MANUAL MODE  

WEEKLY  

PROGRAM  

MODE  

4

5

6

Comfort  

Mode  

Economy  

Mode  

HEATING/COOLING UNIT  

Your Room Thermostat has 4 different modes. Two of them(Comfort and Economy  

Mode)arepresetmodes. Othermodes aremanual mode and programmingmode.  

In preset modes, temperature values are based on user's choices which has been  

set in the beginning. Manual mode provides to operate the Room Thermostat with  

temperature which user's required and set directly. Programming mode continues  

toworkaccordingto theweeklyprogramdetermined bytheuser.  

Warning!  

Operations within the heating / cooling unit or the electrical installation must be  

carriedout byprofessionally qualified persons.  

1

2

3

4

5

6

On/Off Button  

PAIRING THE ROOM THERMOSTAT AND THE RECEIVER  

Temperature Adjustment (To Increase)  

Temperature Adjustment (To Decrease)  

Weekly Program Button  

Setting Button  

Mode Button – Unlock Button  



Primarily press the sync button of receiver for 2 seconds and see blinking green  

light of receiver.  

Temperaturevaluesof presetmodes can be changed on “Settings”menu.  



In order to go to “Settings” menu, “Settings” button needs to be pressed for 3  

seconds. Date and time settings would appear in first screen, to skip it “Settings”  

button should be pressedfor 3 times.  







While yourdeviceis turned off, pressand hold the"On/Off"button for 3 seconds.  

Pressthebutton until the“  

” menu appears.  

Press the “Up” or “Down” button of your Room Thermostat while the LED is  

flashing green.  



Comfort Mode's “  

” temperature value would appear and temperature for  

Comfort Mode can be adjusted bypressing“Up” and “Down”buttons.  

1

2

3

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE Therma 300S RF Wireless Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.23 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE Therma 300S RF Wireless Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Battery placement is essential for the device's operation. If pairing is successful, the green flashing LED on the receiver will be constant. Temperature sensors in room thermostats are highly sensitive and may require calibration. Recommended temperature calibration is “0.0°C”. The device has heating and cooling modes that can be switched easily. A low battery warning appears when the battery is low, indicating it's time for replacement. The receiver must be installed at least 50 cm away from the heating/cooling unit. The room thermostat should be placed in a frequently used room, avoiding areas with direct sunlight or near heating/cooling units. Operations within the heating/cooling unit must be carried out by qualified persons. The room thermostat has a key lock function to prevent unintended contact.
• Page 2: WARRANTY CONDITIONS The warranty period starts from the invoice date and is warranted against manufacturing defects for 5 years. Devices and apparatus are delivered to the customer in working condition. On-site commissioning is subject to a service fee. The repair of the devices and apparatus covered by the warranty is carried out in our company factory. The maintenance of devices and apparatus is done in our company, and the round travel fares belong to the customer. In case of malfunctioning of the devices and apparatus whose warranty period continues, it is tested in our company whether the malfunction is caused by a customer or manufacturer fault. Customers should be aware of damages of the product and warn the manufacturer since the day warranty duration starts. Malfunctions resulting from the use of devices and apparatus contrary to the matters stated in the User Manual are not covered by the warranty. Devices and their apparatus are out of warranty if they are beaten, broken, or scratched by the customer. Your Room Thermostat works with the TPI algorithm, predicting when the temperature of your home will rise above or below the set temperature. TPI technology is designed to ensure that you get the best possible energy efficiency from your heating/cooling system.