GENERAL LIFE Therma 300S Wired Room Thermostat User Manual

1

2

ScreenIndicators  

DAY AND HOUR SETTINGS  

Thermostatto thebackand squeezeittowards theback.  

Low Battery Warning: When the “ ” icon appears on the screen, it means  

“low battery warning”. It is recommended to replace the batteries when this  

warning appears.  

ENGLISH  







While your Room Thermostat is on, keep pressing ''Settings'' button for 3  

seconds.  

1

2

3

4

10  

11  

At the first screen that appears ''Hour'' part will be blinking. You may set  

thetimewith“Up” and “Down”buttons.  

DIGITAL ROOM THERMOSTAT  

12  

Warning: When the product is not used for a long period (more than 15 days),  

remove the batteries. Otherwise, malfunctions that may occur would be out of  

warranty.  

After setting the time, ''Settings'' button needs to be pressed once. For  

minute setting, minute part will be blinking. You may set the minute with  

“Up” and “Down”buttons.  

5

generallife.com.tr  

6

7

8

9

Please throwyour dead batteries into thewaste bin forbatteries.  



After setting the minute, ''Settings'' button needs to be pressed once to set  

thedayof theweek.  

ROOM THERMOSTAT WIRING DIAGRAM  

THERMA 300S USER MANUAL  





Mondayhas setasthefirstdayof theweekand indicated withnumber “1".  

Numbers indicates the following days respectively 2-Tuesday, 3-  

Wednesday, 4-Thursday, 5-Friday, 6-Saturdayand 7-Sunday  

When setting is done you may exit by pressing for 3 seconds to “Settings”  

button.  

HEATING/COOLING UNIT  

GENERAL SPECIFICATIONS  

1

2

3

4

5

6

7

8

9

Day Indicator  

Hours of Day  

THERMA 300S is a wired room thermostat. The user can adjust the room  

temperature with the required temperature and get more comfortable and  

economicheating/cooling.  



Hour Indicator  

Screen Lock  

 Dailyand WeeklyProgram (7x24)  

MODE SETTTINGS  

Room Temperature  

Set Temperature  

Economy Mode  

Comfort Mode  

Programming Mode  

Cooling Indicator  

MODES  

 Different Mode Options (Comfort Mode and Economy Mode)  

 PreciseTemperatureMeasurement  

 Heating Calibration  

ON/OFFControl  

Wired Connection  

TPIAlgorithm  

NO COM  

WEEKLY  

PROGRAM  

MODE  

READY MODES  

MANUAL MODE  

 Heating/Cooling Modes  

THERMA 300S AND EQUIPMENTS  

Warning!  

Operations within the heating / cooling unit or the electrical installation  

must be carriedout byprofessionally qualified persons.  

- If the Cooling Indicator is blinking, the cooling  

unit is working.  

Comfort  

Mode  

Economy  

Mode  

Alkaline  

Battery  

Dowels and Screws  

10  

THERMA 300S  

Room Thermostat  

- If the Cooling Indicator is steady, the cooling unit  

is not working.  

Heating Indicator  

Your Room Thermostat has 4 different modes. Two of them(Comfort and  

Economy Mode) are preset modes. Other modes are manual mode and  

programming mode.  

ROOM THERMOSTATTEMPERATURE CALIBRATION  

Temperature sensors which are used in Room Thermostats are highly  

sensitive. You mayneed to calibrate yourRoom Thermostat if youwould like  

to get the same temperature values with other thermometers in your living  

space.  

- If the Heating Indicator is blinking, the heating  

unit is working.  

In preset modes, temperature values are based on user's choices which has  

been set in the beginning. Manual mode provides to operate the Room  

Thermostat with temperature which user's required and set directly.  

Programming mode continues to work according to the weekly program  

determined bytheuser.  

11  

12  

- If the Heating Indicator is steady, the heating  

unit is not working.  

Battery Indicator  



While your device is turned off, press and hold the "On/Off"button for 3  

seconds.  

TECHNICAL DATA  

Temperaturevaluesof presetmodes can be changed on “Settings” menu.  



Press the "On/Off" button until the “  

” menu appers. In order to see the  

ROOM THERMOSTAT PLACEMENT  

Dimensions  

Operating Current  

Relay NO Switching Current  

100mm / 160mm / 18.2mm  



In order to go to “Settings” menu, “Settings” button needs to be pressed  

for 3 seconds. Date and time settings would appear in first screen, to skip  

it“Settings” button should be pressed for 3 times.  

desired temperature, set the temperature difference by press the  

“Temperature Adjustment Buttons”. This value can be arranged between  

“-8^oC" and “+8^oC".  

3V DC (2 x AAA alkaline battery)  

2A (30VDC – Resistive load)  

0.5A (125VAC – Resistive load)  

Room Thermostat needs to be placed in the room which is used most  

frequently. For instance; living room or lounge. Placing the Room  

Thermostat in a spot that have air circulation like entrance of a room or side  

of window should be avoided. Also anywhere close to heating/cooling units  

such as radiator, stove and spots which get direct sun lights would not be  

suitable. Room Thermostat needs to be located above the floor 150 cm  

height. Fewtrialsmaybe made to find themost convenientspot.  











Comfort Mode's “  

” temperature value would appear and temperature  

Temperature Measurement Accuracy 0.1^oC  



To save the settings and exit, press the "On/Off" button until the device  

turns off.  

for Comfort Mode can be adjusted bypressing “Up” and “Down”buttons.  

When setting is done, by pressing “Settings” button, Economy mode can  

be set.  

Operating Temperature Range  

Battery Life  

(5^oC) – (30^oC)  

Note:Recommended tempreturecalibration is “0.0^oC”.  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

Operating Temperature  

Storage Temperature  

Economy Mode's “  

” temperature value would appear and temperature  

ROOM THERMOSTAT HEATING / COOLING MODES  

Your Room Thermostat has heating and cooling modes. In order to switch  

easilybetweenheating and cooling modes:  

for Economy Mode can be adjusted bypressing “Up” and “Down”buttons.  

Pressing “Settings” button for 3 seconds again would close “Settings”  

screen.  



While your device is turned off, press and hold the “On/Off” button for 3  

seconds.  

Manual mode temperature can be set by pressing “Up” and “Down”  

buttons while on home screen. When “Up” or “Down” buttons are pressed  

Room Thermostatwill be seton Manual Mode.  





Pressthe“On / Off” button until the “  

” menu appears.  

ROOM THERMOSTAT  

Buttons Functions  

You can switch between “  

” (heating) and “ ” (cooling) modes by  



Youcanpressthe"Mode" buttontoswitchtoothermodes.  

using the“Up” or "Down"buttons in the“  

” menu.  





To save the settings and exit, press the “On / Off” button or wait 10  

seconds until thedeviceturns off.  

PROGRAMMING MODE  

You may choose which mode will be active, individually for each hour of the  

day with programming mode. Weekly program mode includes 2 active  

1

2

3

The settings you have made have been saved. Once you turned on your  

device, itwill operatewiththe changed settings.  

modes. Those areComfort Mode “  

” and Economy Mode “  

”.  













In order to arrange the weekly program ''Programming” button needs to be  

FACTORY SETTINGS RESET  

pressed for 3 seconds.  

4

5

6

You can reset your Room Thermostat to its default factory settings. This  

operation resets the mode temperature values, calibration setting and  

heating/coling modes to factory setting. To reset your Room Thermostat to  

factory setting:  

On the screen there will be icons for the day which wants to be  

programmed, hours of thedayand activemode.  

“By pressing “Mode” button, chosen mode for that specific hour may be  

changed.  

BATTERY PLACEMENT  

Before starting, power off the device connected to the Room Thermostat  

and make surethattheenergy is cut off.  



While your device is turned off, press and hold the "On/Off"button for 3  

seconds.  

By pressing the up or down button, you can scroll through the hours of the  

dayand program according to the activemode.  

Press the “Setting” button to change the day of the week while making a  

weeklyprogram.  

1

2

3

4

5

6

On/Off Button  





Pressthe“On/Off” button until “  

While in the “ ” menu, select the “  

buttons and pressthe“On/Off” button.  

Your devicewill be turned off and resetto factory settings.  

” menu appears.  

Temperature Adjustment (To Increase)  

Temperature Adjustment (To Decrease)  

Weekly Program Button  

” option by using “Up” or “Down”  

After setting a weekly program press the ''Programming'' button for 3  

seconds to saveit.  



Setting Button  

Mode Button – Unlock Button  

KEY LOCK  

In the Room Thermostatthereis akeylock function to avoidany unintended  

contact.  

As shown in the picture above, press the screwdriverforward from the space  

shown, bend the tabs and separate the front cover. Insert 2 new AAA alkaline  

batteries in the battery housing with the correct battery direction. Replace  

both batteriesatthesametime. Then align thefront part of yourRoom  

In order to unlock the Room Thermostat's key lock “Mode” button should be  

pressed for 3 seconds. If buttons on Room Thermostat are not touched for  

10seconds, keylock will be reactivated.  

1

2

3

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE Therma 300S Wired Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.12 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE Therma 300S Wired Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Day and hour settings are crucial for proper thermostat operation. Low battery warning indicates the need for battery replacement. Pressing the settings button for 3 seconds allows access to time settings. The first screen shows the hour part blinking for time adjustment. After setting the time, the settings button must be pressed again for minute adjustments. The room thermostat is a wired device that allows temperature adjustments for comfort and efficiency. Different mode options include comfort mode and economy mode. The thermostat has heating and cooling modes, which can be switched easily. Temperature calibration may be necessary for accurate readings. Weekly programming allows for individualized settings for each hour of the day.
• Page 2: TPI room thermostat working logic Your room thermostat works with the TPI algorithm, predicting temperature changes to maintain your set temperature with minimal deviation. If the placement of the TPI room thermostats is changed, the learning process will restart and should be considered as 7 days. The warranty period starts from the invoice date and covers manufacturing defects for 5 years. Devices and apparatus are delivered in working condition, and on-site commissioning is subject to a service fee. In case of malfunctioning devices under warranty, the cause will be tested and reported by the company. The connection between your room thermostat and the heating/cooling unit should be made by professionally qualified persons. TPI technology ensures energy efficiency by measuring and applying optimal timings for maintaining the desired temperature. Malfunctions caused by customer misuse are not covered by the warranty. The warranty document must be kept by the customer during the warranty period; a second document will not be issued if lost. The manufacturer is not responsible for compliance with directives if changes are made to the product without approval.