GENERAL LIFE 300S RF Wireless Room Thermostat User Manual

1

2

ScreenIndicators  

BATTERY PLACEMENT  





If the pairing is successful, the green flashing LED on the receiver will be  

constant.  

Receiverand Room Thermostathavebeen pairedtoeachother.  

ENGLISH  

1

2

3

4

10  

11  

DIGITAL ROOM THERMOSTAT  

ROOMTHERMOSTATTEMPERATURECALIBRATION  

12  

Temperature sensors which are used in Room Thermostats are highly sensitive.  

You may need to calibrate your Room Thermostat if you would like to get the same  

temperaturevalueswithotherthermometersin yourliving space.  

5

generallife.com.tr  

6

7



While yourdeviceisturnedoff, pressand hold the"On/Off"button for 3seconds.  

Press the "On/Off" button until the “ ” menu appers. In order to see the desired  

temperature, set the temperature difference by press the “Temperature  

AdjustmentButtons”. This valuecanbearrangedbetween“-8^oC" and “+8^oC".  

To savethesettingsand exit, pressthe"On/Off" button until thedeviceturnsoff.  

As shown in the picture above, press the screwdriver forward from the space  

shown, bend the tabs and separate the front cover. Insert 2 new AAA alkaline  

batteries in the battery housing with the correct battery direction. Replace both  

batteries at the same time. Then align the frontpart of your Room Thermostat to the  

backand squeezeittowardstheback.  



8

THERMA 300S RF USER MANUAL  

9



GENERALSPECIFICATIONS  

Note:Recommended tempreturecalibrationis“0.0^oC”.  

1

2

3

4

5

6

7

8

9

Day Indicator  

Low Battery Warning: When the “  

” icon appears on the screen, it means “low  

THERMA 300S RF is a wireless room thermostat. The user can adjust the room  

temperature with the required temperature and get more comfortable and  

economic heating/cooling.  

 Dailyand WeeklyProgram(7x24)  

 DifferentModeOptions (Comfort Modeand EconomyMode)  

Hours of Day  

ROOMTHERMOSTATHEATING/COOLINGMODES  

Your Room Thermostat has heating and cooling modes. In order to switch easily  

betweenheating and cooling modes:  







battery warning”. Itisrecommendedtoreplacethebatterieswhen thiswarning  

appears.  

Warning: When the product is not used for a long period (more than 15 days), remove  

thebatteries. Otherwise, malfunctionsthatmayoccurwould beoutofwarranty.  

Pleasethrowyourdead batteriesinto thewastebinforbatteries.  

Hour Indicator  

Screen Lock  

Room Temperature  

Set Temperature  

Economy Mode  

Comfort Mode  

Programming Mode  

Cooling Indicator  

While yourdeviceisturnedoff, pressand hold the“On/Off” button for 3seconds.  

Pressthe“On /Off” button until the“ ”menu appears.  

” (heating) and “ ” (cooling) modes by using the  

”menu.  

 PreciseTemperatureMeasurement  

 Heating Calibration  

 Heating/Cooling Modes  

ON/OFFControl  

WirelessConnection  

TPIAlgorithm  

You can switch between “  

“Up”or"Down"buttons in the“  

RECEIVERPLACEMENT  





To save the settings and exit, press the “On / Off” button or wait 10 seconds until  

thedeviceturnsoff.  

The settings you have made have been saved. Once you turned on your device, it  

willoperatewiththechanged settings.  

10  

- If the Cooling Indicator is blinking, the cooling unit is working.  

- If the Cooling Indicator is steady, the cooling unit is not working.  

Heating Indicator  

- If the Heating Indicator is blinking, the heating unit is working.  

- If the Heating Indicator is steady, the heating unit is not working.  

Battery Indicator  

The important things to note for the Receiver placement is  

avoiding physical contact between the Receiver and  

heating/cooling unit, and protectingit against materials such  

asliquid, dustetc.  

THERMA 300SRFANDEQUIPMENTS  

Holder  

Alkaline  

Battery  

THERMA 300S RF  

11  

Room Thermostat  

FACTORY SETTINGS RESET  

12  

You can reset your Room Thermostat to its default factory settings. This operation  

resets the mode temperature values, calibration setting, heating/coling modes and  

hysteresis settings to factory setting. To reset your Room Thermostat to factory  

setting:  







RECEIVER  

The devices should be placed in order to minimize the damage to the received and  

transmittedsignals bypayingattentiontothefollowingpoints;  



Thedevicesshould not bemounted on metalsurfaces.  

1-ManualOperationButton:  

1

2

3



The devices should not be installed close to electrical cables and electronic  

equipment such ascomputersand televisionunits.  

Deactivates the Receiver and allows you to use  

heating/cooling unitmanually.  

2-PairingButton:  

Allows to pair the Receiver with the Room  

Thermostat.  

3-ReceiverLEDLight  

4-ReceiverPowerCable Input  

5-Heating/CoolingUnit ConnectionCable Input  

While yourdeviceisturnedoff, pressand hold the"On/Off"button for 3seconds.  

Dowels and Screws  

Receiver  

Pressthe“On/Off” button until “  

”menu appears.  

” option by using “Up” or “Down” buttons  







The devices should not be installed near large metal structures or other building  

materialsusing finemetalmeshessuch asspecialglassorspecialconcrete.  

Distance between the Room Thermostat and the Receiver should not exceed 20  

metersor2floors.  

While in the “  

” menu, select the “  

and pressthe“On/Off” button.  

Your devicewillbeturnedoff and resettofactory settings.  



Receivermustbeinstalledatleast50cmawayfromtheheating/cooling unit.  

KEYLOCK  

In the Room Thermostat there is a key lock function to avoid any unintended  

contact.  

In orderto unlock the Room Thermostat's keylock “Mode”button should be pressed  

for 3 seconds. If buttons on Room Thermostat are not touched for 10 seconds, key  

lockwillbereactivated.  

RECEIVERSETUP  







First, shut down your heating/cooling unit and your heating/cooling unit's power  

sourcewithallelectricalcurrent(fuse, socketetc.)  

As shown in the connection diagram, connect one end of the heating/cooling unit  

connection cabletotheCOMand theothertotheNOinput of theReceiver.  

Connect the other ends of the cable -which youconnected to the Receiverto room  

thermostat connection terminal as shown in your heating/cooling unit's user  

manual.  

TECHNICALDATA  

Room Thermostat  

4

5

Dimensions  

100mm / 160mm / 18.2mm  

RECEIVERLEDDESCRIPTIONS  

Operating Current  

3V DC (2 x AAA alkaline battery)  

Temperature Measurement Accuracy  

Operating Temperature Range  

Battery Life  

Operating Temperature  

Storage Temperature  

0.1^oC  

Steady Red  

Receiver has power but Receiver and Room  

(5^oC) – (30^oC)  

DAY ANDHOURSETTINGS  

Thermostat are not paired.  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  







While your Room Thermostat is on, keep pressing ''Settings'' button for  

seconds.  

3

Blinking Green  

Steady Green  

Waiting for pairing signal from the Room Thermostat.  

Receiver and Room Thermostat are paired.  

Heating/cooling unit is not operating.  

Operate the heating/cooling unit signal has  

reached to the Receiver.  







You must first connect the Receiver power cable to the Receiver and then to the  

fuse towhich theheating/cooling unit isconnected.  

After completing the cable connection process, firstly turn on your fuse and then  

yourheating/cooling unit.  

By pressing the Receiver's manual usage button for 2 seconds, you should see  

the Orange Light blinking on the Receiver. In this way, after making sure that the  

heating/cooling unit is operating, press the same button again for 2 seconds and  

seethattheOrangeLEDturnsoff.  

At the first screen that appears ''Hour'' part will be blinking. You may set the time  

with“Up”and “Down”buttons.  

After setting the time, ''Settings'' button needs to be pressed once. For minute  

setting, minute part will be blinking. You may set the minute with “Up” and “Down”  

buttons.  

Aftersetting the minute, ''Settings'' button needs to be pressedonce to setthe day  

of theweek.  

Mondayhassetasthefirstdayof theweekand indicatedwithnumber “1".  

Numbers indicates the following days respectively 2-Tuesday, 3-Wednesday,  

4-Thursday, 5-Friday, 6-Saturdayand 7-Sunday  

3 Short Orange  

Blinking  

Steady Orange  

3 Short Green  

Blinking  

Heating/cooling unit is operating.  

Receiver  

Dimensions  

Operation Current  

Relay NO Switching Current  

Shut the heating/cooling unit down signal has  

reached to the Receiver.  

90mm / 90mm / 25mm  

230V AC  

7A (240VAC – Resistive load)  

10A (120VAC – Resistive load)  

(-20^oC) – (+60^oC)  

Blinking Orange  

Heating/Cooling unit operates in manual mode.  



Blinking Red  

Receiver did not get any signal from the Room  

Thermostat for 22 minutes or longer.  

Heating/cooling unit has shut down.  

Storage Temperature  







Setup theRoom ThermostattopairtheReceiverwiththeRoom Thermostat.  

AC  

RECEIVERWIRINGDIAGRAM  

ROOMTHERMOSTAT  

ButtonsFunctions  

ROOMTHERMOSTATPLACEMENT  

COM  

NO  

(230V)  



When settingisdone youmayexitbypressingfor3seconds to“Settings”button.  

Room Thermostat needs to be placed in the room which is used most frequently.  

For instance; living room or lounge. Placing the Room Thermostat in a spot that  

have air circulation like entrance of a room or side of window should be avoided.  

Also anywhere close to heating/cooling units such as radiator, stove and spots  

which get direct sun lights would not be suitable. Room Thermostat needs to be  

located above the floor 150 cm height. Few trials may be made to find the most  

convenientspot.  

MODESETTTINGS  

MODES  

1

2

3

PRESET MODES  

MANUAL MODE  

WEEKLY  

PROGRAM  

MODE  

4

5

6

Comfort  

Mode  

Economy  

Mode  

HEATING/COOLING UNIT  

Your Room Thermostat has 4 different modes. Two of them(Comfort and Economy  

Mode)arepresetmodes. Othermodes aremanual mode and programmingmode.  

In preset modes, temperature values are based on user's choices which has been  

set in the beginning. Manual mode provides to operate the Room Thermostat with  

temperature which user's required and set directly. Programming mode continues  

toworkaccordingtotheweeklyprogramdeterminedbytheuser.  

Warning!  

Operations within the heating / cooling unit or the electrical installation must be  

carriedout byprofessionally qualified persons.  

1

2

3

4

5

6

On/Off Button  

PAIRINGTHEROOMTHERMOSTATANDTHERECEIVER  

Primarily press the sync button of receiver for 2 seconds and see blinking green  

light of receiver.  

While yourdeviceisturned off, pressand hold the"On/Off"button for3seconds.  

Pressthebutton until the“  

Press the “Up” or “Down” button of your Room Thermostat while the LED is  

flashing green.  

Temperature Adjustment (To Increase)  

Temperature Adjustment (To Decrease)  

Weekly Program Button  



Temperaturevaluesof presetmodes canbechanged on “Settings”menu.  



In order to go to “Settings” menu, “Settings” button needs to be pressed for 3  

seconds. Date and time settings would appear in first screen, to skip it “Settings”  

button should bepressedfor3times.  

Comfort Mode's “  

Comfort Modecanbeadjustedbypressing“Up”and “Down”buttons.  

Setting Button  

Mode Button – Unlock Button  







”menu appears.  



” temperature value would appear and temperature for  

1

2

3

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE 300S RF Wireless Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.05 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE 300S RF Wireless Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Battery placement is crucial for the device's operation. If pairing is successful, the green flashing LED on the receiver will be constant. Temperature sensors in room thermostats are highly sensitive and may require calibration. The recommended temperature calibration is “0.0°C.” The device has heating and cooling modes that can be switched easily. A low battery warning appears when the battery icon is displayed on the screen. It is recommended to replace batteries when the low battery warning appears. The room thermostat should be placed in frequently used rooms, avoiding areas with direct sunlight or near heating/cooling units. The key lock function prevents unintended contact with the thermostat. The room thermostat has four different modes: Comfort, Economy, Manual, and Programming.
• Page 2: warranty conditions The warranty period starts from the invoice date and is warranted against manufacturing defects for 5 years. Devices and apparatus are delivered to the customer in working condition. The repair of the devices and apparatus covered by the warranty is carried out in our company factory. In case of malfunctioning of the devices and apparatus whose warranty period continues, it is tested in our company whether the malfunction is caused by a customer or manufacturer fault. Malfunctions resulting from the use of devices and apparatus contrary to the matters stated in the user manual are not covered by the warranty. Battery leakage and errors due to rust, oxidation, and liquid contact by working in acidic/humid environments are not covered by the warranty. If the product is not used for a long period (more than 15 days), remove the batteries. Damages that may occur during the transportation of devices and apparatus are not covered by the warranty. The customer can make complaints and appeals to consumer courts or consumer arbitration committees. The warranty document must be kept by the customer during the warranty period.