HIVE 81351 Thermostat Mini for Heating Installation Guide
Hive Thermostat Mini Installation Guide
3d
Multizone systems – Important things to know
1
If you’re installing Hive on multiple zones, you’ll need to install all the Receivers before testing
the boiler and pairing the thermostats (stages 4 and 5).
2
3
Hive Multizone can support an unlimited amount of heating and hot water zones.
OpenTherm is not currently supported on central heating systems with multiple zones. If the
boiler is OpenTherm compliant and is configured with a plumbed zone system, please ensure
all Receivers are set to standard relay mode (the default switch position: 2).
4
If installing a dual channel Receiver, the chosen central heating zone will need to be wired
into the dual channel Receiver, and this zone will control the hot water.
Hot tips:
Ensure you complete stage 4 (page 15) to confirm Receivers are installed and operating the
heating system correctly.
Label the Receivers once you have installed them so that it’s clear which Receiver controls
which zone.
When you are pairing the Receivers to the thermostats, (stage 5) ensure that you pair the
Receivers once at a time so you can identify which thermostat is paired to which Receiver.
3e
Gravity-fed and pumped systems
Gravity-fed and part-pumped systems are wired differently to standard boilers. With these, the hot
water relay switches on the boiler, whilst the heating relay opens a valve, operates a pump, or both, to
divert hot water to the heating. If you are installing into a gravity-fed or part pumped system,
complete the wiring and then switch the Hive Receiver to ‘gravity-fed’ mode as follows:
1
Switch off the power to the boiler and Receiver.
2
3
Wait at least 5 seconds, then switch the boiler and Receiver back on.
Press and hold the hot water button for at least 10 seconds.
The Receiver status light will flash BLUE for 3 seconds when entering ‘gravity-fed’ mode.
Or GREEN for ‘fully pumped’ mode. Fully pumped mode is the default for new devices.
11
| General | Details |
|---|---|
| Name | HIVE 81351 Thermostat Mini for Heating Installation Guide |
| Make | HIVE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.35 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HIVE HAH2INSTAMZ-01 Active Heating Thermostat User Guide
HIVE SLT3 Thermostat User Guide
HIVE 852031 Mini Wireless Heating Smart Thermostat Instructions
HIVE Thermostat for Heating Owner’s Manual
HIVE Thermostat Mini User Guide
HIVE Cheap Smart Thermostat User Guide
Hive B011B3J6B8 Active Heating Thermostat Owner’s Manual
PURGEAR STC-8080H Digital Thermostat User Guide
EBERLE UTE 1032-55, UTE 1032-50 Flush Mounted Room Thermostat Owner’s Manual
ENGO EASY230W Wired Thermostat User Guide
HEAT DECOR HD-T1000 WIFI Thermostat User Guide
SENNA-300-RF Digital Room Thermostat User Guide
EUROLAMP 147-44030 Digital Heating Smart Thermostat User Manual
OJ ELECTRONICS MWD5-1999-R3C3 Voice Thermostat Instructions
Honeywell Non-Programmable Thermostat RTH5160D1003 Installation Guide
Danfoss RT 106 Thermostat Installation Guide
seitron TR D02B Wireless Digital Thermostat User Manual