PRAXISDIENST DZ 003 Dry Block Thermostat User Manual

1

2

3

4

5

6

7

8

9

1

Dry Block Thermostat  

Operating Manual  

Edition 2021-01  

Edition 2021-01  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	PRAXISDIENST DZ 003 Dry Block Thermostat User Manual
Make	PRAXISDIENST
Language	English
Filetype	PDF (Download)
File size	0.11 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• PRAXISDIENST

PRAXISDIENST DZ 003 Dry Block Thermostat User Manual Overview

Summary of Contents

• Page 1: Dry block thermostat operating manual. Edition 2021-01.
• Page 2: Symbols Safety instructions Device safety Disposal General information about the dry block thermostat Delivery and installation Operating elements Operating Maintenance Technical data
• Page 3: Safety instructions This device has been tested and left the factory in perfect technical condition. To maintain this condition and to ensure safe, trouble-free operation, the user must follow the instructions and warnings provided in this operating manual. Device safety The Dry Block Thermostat DZ 003 complies with the safety regulations according to the standard DIN EN 61010-1. The device meets the EMC requirements for laboratory devices according to the standard DIN EN 61326. Disposal Diaglobal GmbH will take back and dispose of units that are no longer needed or cannot be repaired, free of charge.
• Page 4: Operating elements include space for 12 round cuvettes and a red switch for ON/OFF. After switching on the Dry Block Thermostat DZ 003, the device heats up to a temperature of 37 °C. The device needs about 20 minutes to heat up. The GREEN LED shows a continuous light when the system is ready for use. The status of the device is indicated by two LEDs: the GREEN LED for stability check and the RED LED for heating power. The GREEN LED flashing indicates that the temperature is not stable. The GREEN LED lights continuously when the temperature is stable. The RED LED flashing indicates that the heating is switched on and off. The RED LED lights continuously during warm-up when the heating is switched on.
• Page 5: Maintenance provides necessary information concerning general maintenance by the user. If fault-free operation of the device cannot be achieved, customer service should be contacted. Repairs to the device may only be carried out by authorised specialist staff. Unauthorised repairs can endanger the operator and also invalidate the warranty. Liquid waste is potentially biohazardous. Always wear gloves when handling these materials. Take care that no liquid enters the device. Commercially available decontaminating solutions are recommended for cleaning the device. The Dry Block Thermostat is adjusted and calibrated at the factory on delivery. Climatic conditions for storage and transport of the packed device include temperature and relative humidity specifications.
• Page 6: Type: Plate Short specifications: Microcontroller based temperature device Temperature: 37 °C with an accuracy of ± 0.2 °C Power supply: Supply voltage: 12 V DC Maximum current consumption: 1.2 A DC Power consumption: < 15 VA External mains adapter output: 12 V DC Dimensions: Dry Block Thermostat: 160 mm / 100 mm / 85 mm Weight: 850 g Dimensions: AC-Adapter: 95 mm / 45 mm / 30 mm Weight: 250 g Container: Dry Block Thermostat DZ 003: 12 positions for round cuvettes
• Page 7: Certificates EC Declaration of Conformity Manufacturer: Diaglobal GmbH Product name: Dry Block Thermostat DZ 003 The product complies with the requirements of the standards and directives EN 61326-1 and EN 61010. It follows the requirements of EC Directives 89/336/EEC Electromagnetic Compatibility and 73/23/EEC Low Voltage Directive. This declaration describes a Dry Block Thermostat for laboratory use. Berlin, October 2008 Edition 2021-01