Moes BHT-006 Series Thermostat User Manual

1

2

3. Power off protection, save all your settings safely;  

4. Provide weather information and humidity display  

5. Preset adjustment of 5+1+1 mode in a week, programma-  

ble setting of 6 time periods a day, green energy saving,  

Less cost, more intelligent and environmental protection;  

6. Support the creation of product local groups/shares to  

achieve unlimited centralized control of the number of  

products/  

Press the  

/

in the power-on state to display the humidity  

Press icon  

four times in a row. You can see “MON TUE WED  

, and the minutes of time are flashing.  

ABOUT YOUR THERMOSTATS  

WIRING  

HOME, SMART MOES HOME  

and set temperature.  

GA  

GB  

GC  

YHU FRI” and  

The BHT- 006 range has been developed to control electric  

underfloor, water heating or water/ gas boiler systems.  

These units are designed for use in commercial, industrial,  

civil and domestic properties  

Use  

to set the minutes;  

AC95~240V  

N

AC95~240V  

N

AC95~240V  

N

L

L

L

NTC  

NTC  

NTC  

BHT-006 Series Thermostat  

Press the icon  

hour by  

again, the hour of the time will flash, set the  

IP20  

IP20  

IP20  

LOAD  

N1  

Dry Contact  

Weather  

Mode  

M

;

Heating On  

L1  

5

6

5

6

1

3

4

1

3

4

2

2

Press the icon  

again, the temperature setting will flash, set  

1

3

4

2

Room Temp  

Set Temp  

Underfloor  

Heating On  

the temperature by  

;

MODEL DEFINITION  

Clock  

This completes the setting of periods1.  

multi-terminal control;  

GA: Water heating, 5A  

Temp.Display  

In the same way, complete the settings of periods2, 3, 4 and 5  

(display periods1,2), 5 (display periods3, 4).  

7. Perfect access: Tmall Genie, Amazon echo, Google Home,  

full experience new voice control method;  

GB: Electric floor Heating, 16A  

GC: Water/Gas Boiler, 5A  

L: Backlight  

Energysaving  

Power On/off  

Sleep mode  

Wifi  

Manual/  

Press the icon  

once more to enter the Saturday schedule  

Programmable  

Note:  

Lock  

Period  

settings (you will see the SAT in the upper left corner of the  

GA is for water heating;  

Up  

N: Modbus Communication  

W: Wifi  

screen).  

GB is for electric heating;  

GC is for water/gas boiler;  

NTC and Modbus is optional.  

DIMENSION:(mm)  

Week  

Repeat the above process to set the period and temp. and  

Sunday schedule.  

Down  

RH  

S2: Both internal sensor and floor external sensor  

For example: BHT-006GA  

60.0  

Time  

Press the icon  

once more to confirm and exit.  

INSTALLATION  

In the box you will find  

Your thermostat is suitable for istallation within a standard  

86mm pattress box or European 60mm pattress box.  

Default settings for program schedule  

Bitte scannen Sie den QR-Code, um das deutsche Handbuch,  

das Installationsvideo und die Funktionseinführung zu erhalten  

Escanee el código QR para obtener el manual en español, el  

video de instalación y la introducción de la función  

Veuillez scanner le code QR pour obtenir le manuel en français,  

la vidéo d'installation et l'introduction des fonctions  

Отсканируйте QR-код, чтобы получить руководство на  

русском языке, видео по установке и описание функций  

Leia o código QR para obter o manual em português, o vídeo de  

instalação e a introdução das funções  

OPERATION  

+0.1  

Thermostat  

User Guide  

QC Passed  

1pc  

1pc  

1pc  

Screws  

2pc  

1pc  

88.0  

-0.1  

WEEKDAY (MONDAY一FRIDAY)  

WEEKEND (SATURDAY)  

WEEKEND (SUNDAY)  

(7 shows on screen)  

During Power On  

Wall plate  

(1 2 3 4 5 shows on screen)  

(6 shows on screen)  

Time display  

Step 1. Keep power off. See Fig 1.  

Step 2. Remove the mounting plate by pushing the LED  

assembly. See Fig 2.  

1. Power On/off: Press  

to turn the thermostat on/off.  

TIME  

TEMPERATURE  

TIME  

TEMPERATURE  

TIME  

TEMPERATURE  

(Floor sensor is Optional)  

Period 1  

Period 2  

Period 3  

Period 4  

06:00  

11:00  

13:30  

17:30  

20  

21  

22  

23  

6:00  

24  

23  

22  

21  

6:00  

19  

20  

21  

20  

2. Function & Programmable  

12:00  

14:30  

17:30  

12:30  

14:30  

18:30  

Touch  

to change between manual mode and programme-  

TECHNICAL DATA  

mode.  

11.9  

37.5  

Power Supply: 95~240 VAC, 50~60 Hz  

In manual mode,  

will show on the display,  

Current Load: 5A (water heating, gas boiler), 16A (electric  

heating)  

In programmable mode,  

will show on the display.  

3. Setting Temperature  

A separate schedule may be set for weekdays (Mon–Fri) and for  

weekends (Sat or Sun).  

Sensor: NTC3950, 10K  

In the programming mode, the temperature setting and time  

Accuracy: ±1°C  

setting will be locked. If the user wants to adjust, he must first  

Set Temp. Range: 5-35°C  

Method Two  

adjust the thermostat to manual mode by pressing the  

key.  

Step 3. Connect power supply, load into the appropriate  

terminals.  

(see "Wiring your thermostat" for details and Fig 3).  

Step 4. Fix the mounting plate into the wall with screws in  

the box. See Fig 4.  

Room Temp. Range: 5-99°C  

Display Temp. Range: 5~99°C  

Ambient Temp.: 0~45°C  

In the mode of manual, press  

temperature.  

to set the desired  

Use APP for one week of programming settings, please refer to  

the second page “Programming your thermostat"  

4. Adjusting/Setting the Clock  

Press  

Press  

5. Locking your Thermostat  

Press and hold the  

thermostat.  

In item 3 of high senior options, you can select full lock or half  

lock.  

6. Adjusting/setting the Program Schedules  

Ambient Humidity: 5~95% RH (Non Condensing)  

Storage Temp.: -10~45°C  

7. Checking the Temperature of Floor Sensor  

Press and hold the  

of floor sensor.  

to set minute, hour and weekday. By using the  

once more to confirm and exit.  

.

arrow for 5 seconds to display the temp.  

Power Consumption: <1.5W  

Timing Error: <1%  

Shell Material: PC+ABS (Fireproof)  

Installation Box: 86*86mm Square or European 60mm Round  

Box  

BEFORE WIRING AND INSTALLING  

for 5 seconds to lock/unlock your  

Preparation for use  

For Water Heating/Boiler/Electric Heating  

1. Read these instructions carefully. Failure to follow them could  

damage the product or cause a hazardous condition.  

2. Check the rathings given in the instructions and on the  

product to make sure the product is suitable for your application.  

3. Installer must be a trained, experienced service technician.  

4. After installation is complete, check out product operation as  

provided in these instructions.  

1

Download MOES App  

Wire Terminals: Wire 2x1.5mm² or 1x2.5mm²  

Protection Class: IP20  

Buttons: Capacitive Touch Buttons  

Thank you for purchasing our products, please read  

the following terms before installation and use:  

Please confirm that this product is suitable for your heating  

equipment before installation;  

*Before installation or maintenance, please make sure to keep the  

power off;  

*Please strictly follow the wiring diagram for wiring installation;  

*Installation to the wall, please confirm that the fasteners are  

suitable for this product;  

*Do not pull the cable too hard, otherwise the product will be  

damaged;  

*If a hard plastic wire is used in the installation process, it must  

be bent to an appropriate angle in advance;  

*Please arrange for professionals to install;  

*Please contact the after-sales service for equipment failure,  

please do not try to repair it yourself;  

Step 5. Fix the thermostat body and the mounting plate by  

the lower button. See Fig 5.  

When Wi-Fi connection is made, your thermostat will automati-  

cally accept the program schedule made via the APP on your  

device.  

FEATURES  

Step 6. Installation complete. See Fig 6.  

On Appearance  

If the schedule is set through the APP, after the APP completes  

1. LED display, more friendly interface;  

the schedule setting, the thermostat needs to be turned off once.  

CAUTION  

2. Touch operation buttons, smoother interaction;  

3. The ultra-thin embedded panel perfectly fits all kinds of walls;  

4. The borderless small rounded corner design is simple and  

atmospheric;  

If the thermostat does not establish a Wi-Fi connection,  

manually set the schedule see below for detailed instructions: To  

set the program schedules throughyour thermostat (NOT via your  

smartphone/tablet) simply follow theinstructions as below:  

Please note: Setting the programme schedule through your  

thermostatcan only be carried out if there is no WiFi connection  

between yourthermostat and smartphone/tablet.  

Electrical Shock or Equipment Damage Hazard. Can shock  

individuals orshort equipment circuitry.  

MOES App is upgraded as much more compatibility than Tuya  

Smart/Smart Life App, functional well for scene controlled by  

Siri, widget and scene recommendations as the fully new  

customized service.  

Disconnect power supply before installation.  

5. Compatible with standard 86mm square cassettes and 60mm  

European cassettes to meet all installation environments;  

On Functionality  

HOME SCREEN QUICK REFERENCE  

Note:  

The weather and humidity will be synchronized within 1 hour  

after the device is connected to the Internet for the first time,  

and the weather will be synchronized every hour thereafter.  

(Note: Tuya Smart/Smart Life App still works, but MOES App  

1. Rich function options, Modbus, WIFI, keycard, etc., to meet  

all your needs;  

2. Strict temperature control accuracy (±1℃) to provide the  

warmth you want;  

is highly recommended)  

* After installation, please refer to this manual to check again to  

ensure normal and safe use, and keep this manual properly.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Moes BHT-006 Series Thermostat User Manual
Make	MOES
Language	English
Filetype	PDF (Download)
File size	0.83 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• MOES

Moes BHT-006 Series Thermostat User Manual Overview

Summary of Contents

• Page 1: Power off protection, save all your settings safely. Provide weather information and humidity display. Preset adjustment of 5+1+1 mode in a week, programmable setting of 6 time periods a day. The BHT-006 range has been developed to control electric underfloor, water heating or water/gas boiler systems. Your thermostat is suitable for installation within a standard 86mm pattress box or European 60mm pattress box. In manual mode, the display will show the current settings. A separate schedule may be set for weekdays and for weekends. Ambient humidity range is 5~95% RH (non-condensing). Electrical shock or equipment damage hazard. The weather and humidity will be synchronized within 1 hour after the device is connected to the Internet for the first time.
• Page 2: Make sure your Smart MOES Smart APP has successfully connected to a Zigbee gateway. Add the device successfully, you can edit the name of the device to enter the device page by clicking “Done”. During the free warranty period, if the product breaks down during normal use, we will offer free maintenance for the product. Natural disasters/man-made equipment failures, disassembly and repair without the permission of our company, no warranty card, products beyond the free warranty period, etc., are not within the scope of free warranty. Please keep this warranty card to ensure your rights. Ensure the device is within the effective signal coverage of your smart ZigBee gateway for successful connection into the ZigBee gateway in MOES APP. All products marked with the symbol for separate collection of waste electrical and electronic equipment must be disposed of separately from unsorted municipal waste. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. Enter the Register/Login interface; tap “Register” to create an account by entering your phone number to get verification code and “Set password”. Click “Done” to enter the device page to enjoy your smart life with home automation.