MOES BRT-100 Radiator Thermostat User Guide

1

2

Enjoy Our Smart Life  

the day of the week can be set by "+" /"-"; press  

again, the screen will flash "number, h, m", indicating  

that the number of days in the vacation mode is set,  

which can be set by the "+" and "-" keys;  

when the "F1" stops flashing, the thermostat motor  

It will all shrink to facilitate the connection of the  

thermostat and the mounting plate.  

DIMENSION  

BRT-100 Radiator Thermostat(TRV)  

52.0  

48.5  

Unit: mm  

User Guide  

Step 5: Connect the thermostat and the mounting  

board When "F1" stops flashing, find the "mark  

point" of the thermostat, shown Fig. 1.Turn  

clockwise to complete the connection between the  

thermostat and the mounting plate. After clicking the  

(only once), the thermostat will display "F2".  

When “F2 ”disappears, while the screen remains on,  

turn the thermostat clockwise to adjust the screen to  

your liking direction.  

5. Lock your Radiator  

Press the +" and"-" keys together for 3 seconds to  

lock or unlock the keys.  

71.5  

85.0  

6. Low voltage reminder  

When the voltage is lower than 1.8V, the screen will  

display  

.

Step 2: Install the adapter.Install the adapter on  

your valve as the picture below. If you don’t need an  

adapter, please ignore this step.  

7. Boost heating  

Installation finished.  

Press and hold "+" for 3 seconds, the device will  

Zigbee Type  

enter the boost heating mode, and the  

flash.The countdown will be displayed in the APP.  

will  

OPERATION  

M30*1.5  

53.0  

Welcome  

1. Power: After installing the battery, it will  

automatically turn on. It can't be turned off till the  

battery is removed.  

Thank you for your purchase. MOES always  

made high-quality products with our high-end  

technology, high-quality craftsmanship, safe  

and reliable materials .The new radiator  

thermostat will bring you a more comfortable  

smart life .  

Please read this installation/ programming  

manual for installing and operating. Please  

also make sure someone qualified to install  

the radiator .  

8. Adjusting/Setting the Programmable Schedules  

Method one;  

HOME SCREEN QUICK REFERENCE  

When the TRV is turned on, it will enter the  

self-check program, and all icons will be displayed  

firstly.  

Manually set a week of programming settings, specific  

operations are as follows:  

Week  

RA  

RAV  

Comap  

Method Two;  

Press  

the temperature control valve is shrinking; when  

"F1" stops flashing, press again, The screen  

, the screen flashes "F1", indicating that  

Use APP for one week of programming settings, please  

refer to the second page "Programming your Radiator"  

Manual editing:  

Low temp.  

Valve open  

Error warning  

Battery reminder  

Zigbee  

protection  

Holiday mode  

Minute  

Hour  

displays "F2",Indicates that the temperature control  

valve is measuring.; when the screen displays the  

room temperature, it indicates that the temperature  

control valve has completed the stroke measure-  

ment, and you can start using the temperature  

control valve normally.  

Key lock  

Press and hold  

flashing numbers on the screen, press  

skip the clock setting. When the screen displays  

"①②③④⑤" (means Monday to Friday), flashing  

numbers and "h", you can set the hour with "+" and  

for 3 seconds. When you see the  

4 times to  

Room temp.  

Energy saving mode  

Open window  

Set temp.  

Comply with all local regulations.  

temp.display  

Programming  

mode  

Manual mode  

FEATURES  

RAVL  

T+A Herz  

1. LED display, no window, wider perspective  

"-"; press  

again, flashing numbers and "m", you  

again, the  

Step 3: Install the thermostat mounting plate.  

Remove the mounting plate of the thermostat (Part 1  

in the picture below) counterclockwise.  

2. Colorful display  

3. Graceful arc waist shape  

can use " +" "-" Set the minutes; press  

Up  

Down  

2. Mode selection  

screen displays "Set", and the temperature can be set  

by "+" "-". This completes the setting of the  

programmed temperature for one week in the morning  

from Monday to Friday.  

By analogy, refer to the one-week programming  

temperature default table to complete one-week  

programming settings.  

menu  

Press  

to switch between manual, programming,  

4. Rubber stretch paint, feel like baby skin  

5. Night Halo colors your home  

6. Low power consumption,battery can last 1  

year for normal use and standby for 2 years.  

7. Low battery tip  

8. Diagram of temperature curve added in APP  

9. Vary colors are available like white, Black,  

gray etc.  

vacation modes.  

TECHNICAL DATA  

Manual mode - In this mode, the device executes  

manual temperature setting. When the set temperature  

is lower than the"minimum temperature", the valve is  

closed (forced closed);  

Programming mode -In this mode, the device  

executes a preset week programming temperature time  

and temperature;  

Power Supply: 3 V,2xAA Batteries,  

Packaging not have battery.  

Maximum stroke: 4.5mm  

Accuracy: ± 0.5°C  

Set Temp. Range: 5~45 °C  

Display temp. Range: 0~70°C  

Ambient Temp.: 0 ~ 45 °C  

9. Programming setting  

Part 1  

Holiday mode  

- In this mode, for example, the  

MON.-FRI.  

SAT.  

SUN.  

vacation mode is set for 10 days and the temperature  

is set to 15 degrees Celsius. After 10 days, the device  

will automatically switch to programming mode;  

In the box you will find  

Time  

Ambient Humidity: 5 ~ 95 % RH (Non Condensing)  

Storage Temp.: -5~ 45 °C  

(①②③④⑤ shows on scteen) (⑥ shows on scteen)  

(⑦ shows on scteen)  

Follow the  

display  

Special note: The Zigbee  

version of the temperature  

Raditor Thermostat 1pc  

TIME  

TEMP.  

TIME  

TEMP.  

TIME  

TEMP.  

instructions in the  

figure below to  

install the mounting  

plate on the valve.  

Pay attention to  

the red label in  

the picture.  

Timing Error: < 1%  

Protection Class: IP 20  

User Guide  

1pc  

1pc  

1pc  

1pc  

1pc  

control valve should be used  

with a Zigbee gateway  

compatible with "Tuya iot'".  

The package does not  

include the battery and  

gateway.  

Period 1  

Period 2  

Period 3  

Period 4  

6:00~11:30  

11:30~13:30  

13:30~17:30  

17:30~6:00  

20  

21  

22  

23  

6:00~12:00  

12:00~14:30  

14:30~17:30  

17:30~6:00  

24  

23  

22  

21  

6:00~12:30  

12:30~14:30  

14:30~18:30  

18:30~6:00  

19  

20  

21  

20  

Temporary manual mode - In this mode,  

icon will  

RA Adapter  

flash.At this time, the device executes the manually set  

temperature and returns to the weekly programming  

mode in the next time period.  

Buttons: Capacitive Touch Buttons  

RAV Adapter  

RAVL Adapter  

Comap Adapter  

Before installing  

Fig. 1  

To avoid damages to the product during installation,  

please read the manual carefully before installing  

TRV.  

10. Setting the Functions and Options  

Press and hold the “-” and 3 seconds together  

, entering into the advanced option settings. The  

screen displays "A1" (function), after 2 seconds,  

the number (settings and options) will display, and  

the options can be set by the "+"/"-" key.  

T+A Herz Adapter 1set  

3. Set the temperature  

Press "+"/"-" key to adjust the temperature.  

Herz Adapter  

1pc  

APPLICATION  

Step 4: Install battery  

Follow the picture below to  

install the battery in the  

correct direction. After the  

battery is installed correctly,  

the thermostat will be turned  

on. At this time, click the  

(only once),the thermostat  

will display and flash "F1",  

4. Set the clock  

Press and hold  

INSTALLATION  

for 3 seconds, the screen will display  

Step 1: Select the adapter.TRV is usually  

connected with M30*1.5mm valve. If you have  

different valves, please determine your valve type  

according to the picture below, and choose the  

correct adapter from the package. If you do not find  

the valve that matches your use in the picture below,  

please buy it carefully.  

"h" and numbers, indicating that the hour is being set,  

set the hour by press "+" / "-" keys; press again,  

the screen will display "m", indicating that the minute  

is being set, press "+" /"-" keys to set the minutes;  

press again, the screen will display "number",  

indicating that the day of the week is being set, and  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	MOES BRT-100 Radiator Thermostat User Guide
Make	MOES
Language	English
Filetype	PDF (Download)
File size	1.07 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• MOES

MOES BRT-100 Radiator Thermostat User Guide Overview

Summary of Contents

• Page 1: Enjoy our smart life. The day of the week can be set by pressing + or -. When F1 stops flashing, the thermostat motor will shrink to facilitate the connection. Connect the thermostat and the mounting board by turning clockwise. Press and hold + for 3 seconds to enter boost heating mode. After installing the battery, the device will automatically turn on. Please read this installation/programming manual for installing and operating. In manual mode, the device executes manual temperature setting. In programming mode, the device executes a preset week programming temperature time and temperature. The package does not include the battery and gateway.
• Page 2: Connect the temperature control valve. Check the tutorial below to complete the connection and setup. Temperature compensation ranges from -9℃ to 9℃. Open window detection checks room temperature every 5 minutes. The thermostat is guaranteed for 24 months since the date of purchase. Forced heating countdown ranges from 100-900 seconds. Energy saving mode temperature ranges from 0.5℃ to 5℃. Command priority includes manual mode and low-temperature protection. Common abnormity and processing methods are provided for troubleshooting. Battery voltage should not be lower than 1.8V.