Home > PRAXISDIENST > PRAXISDIENST DZ 003 Dry Block Thermostat User Manual
PRAXISDIENST DZ 003 Dry Block Thermostat User Manual
4
2.
3.
Safety Instructions
This device has been tested and left the factory in perfect technical condition. To
maintain this condition and to ensure safe, trouble-free operation, the user must
follow the instructions and warnings provided in this operating manual.
Device safety
The Dry Block Thermostat DZ 003 complies with the safety regulations according
to the standard DIN EN 61010-1.
The device meets the EMC requirements for laboratory devices according to the
standard DIN EN 61326.
4.
Disposal
Diaglobal GmbH will take back and dispose of units that are no longer needed or
cannot be repaired, free of charge.
Edition 2021-01
5
5.
General information about the Dry Block Thermostat
In order to carry out kinetics tests more efficiently in the laboratory, it is
necessary to preheat the samples before measurement. In addition, the reagents
must also be kept at incubation temperature during a series of measurements.
For this purpose, a small and handy dry block thermostat was developed as a
stand-alone system in addition to the Diaglobal Photometers.
The features in detail are:
Temperature unit of 37 °C with an accuracy of 0.2 °C
12 positions for round cuvettes
Indication of temperature control by LED
Heating up in 5 minutes per cuvette filled with 1000 L
Power supply:
AC-Adapter:
12 VDC / 15 VA
110 - 240 VAC 50/60 Hz
6.
Delivery and Installation
Delivery
After carefully unpacking the device, check whether it is in perfect condition.
Also, check if it is complete according to the delivery note. The box contains the
following items:
Dry Block Thermostat and AC-Adapter
The packaging materials must be stored carefully in case an item needs to
be returned. Notify your dealer immediately if any defects are found.
Installation
Connect the AC-Adapter to the mains.
The operating voltage range is between 110 VAC and 240 VAC at 50/60 Hz.
Plug the connector into the socket on the backside of the Dry Block Thermostat.
The Dry Block Thermostat DZ 003 is switched on with the red switch on the front
of the device.
After a few seconds, the green LED flashes. The red LED shows a continuous
light.
Edition 2021-01
| General | Details |
|---|---|
| Name | PRAXISDIENST DZ 003 Dry Block Thermostat User Manual |
| Make | PRAXISDIENST |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.11 MB |
(1 votes, average: 5.00 out of 5)
Loading...
SIEMENS Powers Controls TH 192-3 Series Day Night Vent Room Thermostat Instruction Manual
tuya MTS700N Wireless Thermostat User Manual
Beca BHT-12 Smart Thermostat User Manual
Honeywell Home TH2110WF4008 Series Smart Thermostat User Manual
Honeywell TH3110D1008 Non Programmable Digital Thermostat Instruction Manual
heatmiser neoStat-Pro Smart Thermostat Instruction Manual
Honeywell 5000 Series Non Programmable Digital Thermostat Instruction Manual
EMOS P5601UF Floor Heating Thermostat User Manual
HYSEN HY511 WiFi Heating Thermostat Owner’s Manual
NT NetX X5 IP Ethernet Thermostat Instruction Manual