Home > ENGO CONTROLS > ENGO CONTROLS E901-RF Programmable Wireless Thermostat Instruction Manual

ENGO CONTROLS E901-RF Programmable Wireless Thermostat Instruction Manual

9. User settings reset  
11. Cleaning and Maintenance  
There is a small hole to the right of the OK button. This is the reset button. Pressing the reset button will restore the default values in the user settings  
(i.e. time, schedule).  
The E901RF thermostat requires no special maintenance. Periodically, the outer casing can be wiped clean using a dry cloth (please DO NOT use solvents,  
polishes, detergents or abrasive cleaners, as these can damage the thermostat). There are no user serviceable parts within the unit; any servicing or  
repairs could only be carried out by ENGO Controls or their appointed agents.  
12. Technical Informations  
Transmitter’s power supply  
Receiver’s power supply  
Rating max  
2 x AA batteries  
230V AC 50 Hz  
.
16 (5) A  
Please note:  
Output signal  
NO/COM relay  
Do not use a pencil to press the reset button as the graphite build-up on the stylus can short-circuit  
and damage the thermostat. In environments with very strong electrostatic discharge (+/- 8KV), the  
product may not function as under normal conditions. So the device may need to be reset.  
Temperature range  
Display temperature accuracy  
Control algorithm  
Communication  
5 - 35°C  
0.1°C or 0.5°C  
TPI or Hysteresis: 0.25°C and 0.5°C  
Wireless, 868Mhz  
10. Clear settings - factory reset  
To perform factory reset (which will remove all user/installer settings), use the CLR parameter from installer parameters menu. After confirming the  
parameter, the thermostat will restore the default settings.  
transmitter: 150 x 84 x 22  
receiver: 96 x 96 x 27  
Dimension [mm]  
1
2
5 sec.  
84 mm  
Press any button to highlight the display.  
Press and hold button for 5 seconds.  
3
4
150 mm  
3
96 mm  
Use or buttons to move to CLR parameter.  
Confirm the new parameter value with the button.  
96 mm  
34  
35  
E901RF FULL USER MANUAL  
E901RF FULL USER MANUAL  
GeneralDetails
NameENGO CONTROLS E901-RF Programmable Wireless Thermostat Instruction Manual
MakeENGO CONTROLS
LanguageEnglish
FiletypePDF (Download)
File size2.03 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
ENGO Controls EONE230W Internet Controlled Thermostat User Guide
ENGO Controls EONE230W Internet Controlled Thermostat User Guide
ENGO CONTROLS EFAN-230W Fan Coil Thermostat User Guide
ENGO CONTROLS EFAN-230W Fan Coil Thermostat User Guide
ENGO CONTROLS FAN-24W 24V Fan Coil Thermostat User Guide
ENGO CONTROLS FAN-24W 24V Fan Coil Thermostat User Guide
ENGO CONTROLS EASY230W Non-Programmable Wired Thermostat User Guide
ENGO CONTROLS EASY230W Non-Programmable Wired Thermostat User Guide
ENGO CONTROLS EONE230 Internet Controlled Thermostat User Guide
ENGO CONTROLS EONE230 Internet Controlled Thermostat User Guide
ENGO CONTROLS EONEBATW, EONEBATB Internet Controlled Thermostat User Manual
ENGO CONTROLS EONEBATW, EONEBATB Internet Controlled Thermostat User Manual
ENGO Controls E901WIFI Internet Wireless Thermostat User Guide
ENGO Controls E901WIFI Internet Wireless Thermostat User Guide
ENGO CONTROLS EONE-BATW, EONE-BATB Internet Controlled Thermostat User Guide
ENGO CONTROLS EONE-BATW, EONE-BATB Internet Controlled Thermostat User Guide
ENGO CONTROLS EFAN-24W Fan Coil Thermostat User Guide
ENGO CONTROLS EFAN-24W Fan Coil Thermostat User Guide
ENGO CONTROLS EFAN-230W WIFI 230V Fan Coil Thermostat User Guide
ENGO CONTROLS EFAN-230W WIFI 230V Fan Coil Thermostat User Guide

ENGO CONTROLS E901-RF Programmable Wireless Thermostat Instruction Manual