Home > EcoNet > EcoNet RETST800SYS Smart Thermostat User Guide

EcoNet RETST800SYS Smart Thermostat User Guide

Thermostat Location  
The EcoNet Smart Thermostat is the command center for the EcoNet System, as well as the control for the  
heating and cooling equipment. It should be located where it is easily accessible and visible to the homeowner  
or end user. For accurate zone temperature and humidity measurement, the following guidelines should  
be followed:  
The EcoNet Smart Thermostat should be mounted:  
• Approximately 5 feet (1.5 m) from the floor  
• Close to or in a frequently used room, preferably on an inside wall  
Decide if you want to use the adapter plate with your new EcoNet Smart Thermostat. The adapter plate is useful  
if you want to hide marks or holes left by your previous thermostat.  
Note: The adapter plate is sold separately. Adapter Plate - RETSTWPL700.  
The EcoNet Smart Thermostat should NOT be mounted:  
• Close to a window, on an outside wall, or next to a door leading to the outside.  
• Exposed to direct light or heat from a lamp, sun, fireplace, or other temperature-radiating objects which  
could cause a false reading  
• Close to or in direct airflow from supply registers or returns  
• In areas with poor air circulation, such as behind a door or in an alcove  
• On a section of wall with pipes or ductwork  
If you are installing with a remote temperature sensor, place your remote sensor at a height of approx. 5 feet  
(1.5 m) on an interior wall, away from direct heat/cool sources (e.g. fireplace, air vents, etc.)  
> Return to Table of Contents  
EcoNet® Smart Thermostat User Guide 24  
GeneralDetails
NameEcoNet RETST800SYS Smart Thermostat User Guide
MakeEcoNet
LanguageEnglish
FiletypePDF (Download)
File size6.45 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
EcoNet UETST800SYS Smart Thermostat User Guide
EcoNet UETST800SYS Smart Thermostat User Guide

EcoNet RETST800SYS Smart Thermostat User Guide