Home > COMPUTHERM > COMPUTHERM E800RF Multizone Wi-Fi Thermostat Instruction Manual
×
- 1. Computherm E800rf (Multizone Wi-fi Thermostat → Operating Instructions)
- 2.
- 3. A General Description Of The Thermostat (Important Warnings And Safety Recommendations → Meaning Of The Led Lights On Receiver Unit → Information Appearing On The Display Of The Thermostat → Functions Accessible In The Phone Application → Connection And Installation Of The Thermostat And The Receiver Unit → Setting Up The Internet Control)
- 4. 10.2. Disabling Further Connections Of The Thermostat Assigned To The
- 5. 1. General Description Of The Thermostat
- 6. An Example Of Dividing The Heating System Into Zones Is Shown In The Figure Below:
- 7. Chapter 7 For Installation, Connection And Synchronization Of The Receiver With The Thermostats. (Chapter 11. → The Portability Of The Thermostat Offers The Following Advantages: → A Computherm E800rf Thermostats Can Be Used To Control:)
- 8. Reliably
- 9. Led Marked: Pump (Blue Led, Marked: Boiler)
- 10. 4. Information Appearing On The Display Of The Thermostat
- 11. Functions Accessible In The Phone Application
- 12. Location Of The Thermostat And The Receiver Unit (Installation Recommendations → Receiver Unit Location → Electric Shock Prevention → Important Warning)
- 13. Connection And Installation Of The Thermostats And The Receiver Unit (Putting The Thermostat Into Operation)
- 14. Putting The Receiver Unit Into Operation (Connecting The Controlled Device(es) To The Receiver Unit → Attention!)
- 15. The Back Of The Receiver (Heating Unit (boiler) → Zone Valves → Connecting The Receiver Unit To The Mains)
- 16. Synchronization Of The Thermostat And The Receiver Unit
- 17. Attention! (The Thermostat Synchronizes With The Receiver Within 1 Minute After Performing The Synchronization Steps. → If The Value Displayed On The Thermostat Matches The Last Two Digits Of The Number On The Receiver, Press The Button Again. → The Thermostats Display Shows The Text On The Right And The Number On The Left.)
- 18. Setting Up The Internet Control (Installing The Application)
- 19. Connecting The Thermostat To A Wi-fi Network (Synchronization Steps)
- 20. Connecting The Thermostat To The Application (Controlling A Thermostat By Multiple Users)
- 21. Operation Of The Thermostat (Basic Settings → Renaming The Thermostat Assigned To The Application)
- 22. Disabling Further Connections Of The Thermostat Assigned To The Application (Deleting The Thermostat Assigned To The Application → Setting The Day And Time)
- 23. Locking Operating Buttons (Operation Related Settings)
- 24. Settings Menu (Switching Functions → Setting Functions → Exiting Settings Menu)
- 25. Selecting Switching Sensitivity (Defining Maximum Settable Temperature → Defining Minimum Settable Temperature → Calibration Of The Temperature Sensor → Antifreezing → Setting The Keylock Function → Changing Between Heating Or Cooling Mode)
- 26. Calibration Of The Temperature Sensor (adj) (Antifreezing (fre) → Memorizing On/off Status In Case Of A Power Failure (pon))
- 27. 11.5. Changing Between Heating Or Cooling Mode (fun) (11.6. Restoring Default Setting (fac) → 11.7. Delay Of Receiver Unit Outputs → Pump Output)
- 28. Output Delay Function (Switching Between On And Off Positions And Modes Of The Device → Manual Mode → Programmed Auto Mode)
- 29. Manual Mode (Programmed Auto Mode → Description Of The Programmed Mode)
- 30. +2 Mode (+1 Mode → +0 Mode → Description Of The Steps Of Programming → Using Phone Application)
- 31. To Complete Programming And Return To The Screen Belonging To The Thermostat Touch The Icon In The Upper Left Corner. Programs That Were Set…
- 32. Modifying Temperature Until The Next Switch In The Program (Practical Advices, Tackling Any Problems That May Occur → Problem With The Wi-fi Connection → Use Of The Application)
- 33. Frequently Asked Questions
- 34. Műszaki Adatok (Termosztát (adó) Műszaki Adatai)
- 35. Power Supply Voltage (Standby Power Consumption → Max. 0.5 W → Switchable Voltage Of The Relay That Controls The Boiler → Max. 30 V Dc / 250 V Ac → Switchable Current Of The Relay That Controls The Boiler)
- 36. The Computherm Type Wi-fi Thermostat E800rf (Complies With Directives Red 2014/53/eu And Rohs 2011/65/eu → Manufacturer: Quantrax Ltd → Country Of Origin: Kína)
×
COMPUTHERM E800RF Multizone Wi-Fi Thermostat Instruction Manual
The COMPUTHERM E800RF type Wi-Fi thermostat
complies with directives RED 2014/53/EU and RoHS 2011/65/EU.
Manufacturer:
QUANTRAX Ltd.
H-6726 Szeged, Fülemüle u. 34.
Telephone: +36 62 424 133 • Fax: +36 62 424 672
E-mail: iroda@quantrax.hu
Country of origin:
Kína
Copyright © 2024 Quantrax Ltd. All rights reserved.
| General | Details |
|---|---|
| Name | COMPUTHERM E800RF Multizone Wi-Fi Thermostat Instruction Manual |
| Make | COMPUTHERM |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.03 MB |

COMPUTHERM Q20 Programmable Digital Room Thermostat Instruction Manual
COMPUTHERM Q5RF Multi Zone Wireless Digital Room Thermostat Instruction Manual


Gigaset Thermostat Instruction Manual

LUX TH10 Heating Only Mercury FREE Manual Thermostat Instruction Manual

NOBO NTL4S 07 NTL Heater with Thermostat Instruction Manual

WarmlyYours TH115-AF-GA-08 SmartStat TH115 Series Thermostat Instruction Manual

vtech T961NN50 Wired Thermostat User Guide

GREYSTONE TLDF Series Flexible Cable Duct Average Low Limit Thermostat Instruction Manual

EMERSON 1F75H-21PR Programmable Heat Pump Thermostat Instruction Manual

ICM CONTROLS SC2010 N-L Non Programmable Electronic Thermostat Instruction Manual

Danfoss KPU 19 Thermostat Installation Guide

elko One Matter Thermostat Owner’s Manual
Table of Contents
- 1. Computherm E800rf - Multizone Wi-fi Thermostat →
- 2. Page 2 →
- 3. A General Description Of The Thermostat - Important Warnings... →
- 4. 10.2. Disabling Further Connections Of The Thermostat Assign... →
- 5. 1. General Description Of The Thermostat →
- 6. An Example Of Dividing The Heating System Into Zones Is Show... →
- 7. Chapter 7 For Installation, Connection And Synchronization O... →
- 8. Reliably →
- 9. Led Marked: Pump - Blue Led, Marked: Boiler →
- 10. 4. Information Appearing On The Display Of The Thermostat →
- 11. Functions Accessible In The Phone Application →
- 12. Location Of The Thermostat And The Receiver Unit - Installat... →
- 13. Connection And Installation Of The Thermostats And The Recei... →
- 14. Putting The Receiver Unit Into Operation - Connecting The Co... →
- 15. The Back Of The Receiver - Heating Unit (boiler) →
- 16. Synchronization Of The Thermostat And The Receiver Unit →
- 17. Attention! - The Thermostat Synchronizes With The Receiver W... →
- 18. Setting Up The Internet Control - Installing The Application →
- 19. Connecting The Thermostat To A Wi-fi Network - Synchronizati... →
- 20. Connecting The Thermostat To The Application - Controlling A... →
- 21. Operation Of The Thermostat - Basic Settings →
- 22. Disabling Further Connections Of The Thermostat Assigned To ... →
- 23. Locking Operating Buttons - Operation Related Settings →
- 24. Settings Menu - Switching Functions →
- 25. Selecting Switching Sensitivity - Defining Maximum Settable ... →
- 26. Calibration Of The Temperature Sensor (adj) - Antifreezing (... →
- 27. 11.5. Changing Between Heating Or Cooling Mode (fun) - 11.6.... →
- 28. Output Delay Function - Switching Between On And Off Positio... →
- 29. Manual Mode - Programmed Auto Mode →
- 30. +2 Mode - +1 Mode →
- 31. To Complete Programming And Return To The Screen Belonging T... →
- 32. Modifying Temperature Until The Next Switch In The Program -... →
- 33. Frequently Asked Questions →
- 34. Műszaki Adatok - Termosztát (adó) Műszaki Adatai →
- 35. Power Supply Voltage - Standby Power Consumption →
- 36. The Computherm Type Wi-fi Thermostat E800rf - Complies With ... →






































