Amana DS01G Digi Smart Thermostat Instruction Manual
WIREDMAGNETANDPOWEREDDOOR
SENSOR OPTION
Viewed from the back with the power block
in upper right corner.
Power Connection
In cases where there is no top door frame, the sensor will
need to be mounted on the wall next to the door. In these
cases a wired magnet (a field supplied single pole single
throw wired magnet) can be recessed or surface mounted
andwiredtothedoorsensor.Themagnetwillbearecessed
style magnet with wired switch. The wires for the sensor
(20 gauge field supplied) in the magnet will need to be run
during construction. Two wires will be run from the door
sensor location to the PTAC unit; the remaining two wires
willberunfromthemagnetlocationtothesensorlocation.
The door sensor has four (4) terminal locations for wired
powerand/orwiredmagnets.Thetwo(2)terminalsclosest
tothebindingbuttonareforwiredmagnetandthetoptwo
(2) terminals are for wired power.
-
+
-
Wired
Magnet
Connection
+
Pins
Binding Button
Battery Holder
Power Connection
-
Runthemagnetwiresthroughtheopeninginthecenterof
the door sensor wall plate.
Wired
Magnet
Connection
CONNECTING MAGNET
+
Jumper
on Pins
Battery
Connection
Using a pocket size straight blade screw driver push down
ontheterminalbuttontoopenthesocket, insertwireinto
socketandreleasetheterminalbutton.Insertonewireinto
eachofthetwo(2)terminals.Seefollowingimageforwire
locations.
Battery
Holder
Binding Button
POWER CONNECTION
Ifusingthewiredpoweredoptionforthedoorsensor,using
apocketsizestraightbladescrewdriver,pushdownonthe
terminalbuttontoopenthesocket.Insertwireintosocket
and release the terminal button. Insert one wire into each
of the two (2) terminals. See following for wire locations.
ConnectthepowerwiresfromthedoorsensortothePTAC
on terminals C & R. The wire harness kit PWHK01C is
required for this connection.
Note: For battery connection, the jumper must be placed as
shown above
Power Connection
-
Wired
Magnet
Connection
+
Jumper
on Pins
Powered
Connection
Battery
Holder
Binding Button
Note: For 24v powered connection, the jumper must be
placed as shown above
5
| General | Details |
|---|---|
| Name | Amana DS01G Digi Smart Thermostat Instruction Manual |
| Make | Amana |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.66 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Amana MMW-2 Horizontal Digital Wireless non EMS Wall Thermostat Instruction Manual
Amana ATST-CWE-BL-A Smart Thermostat Owner’s Manual
Amana DS01 PTAC Wireless Thermostat User Manual
SALUS RT520 Programmable Thermostat User Guide
Braemar BRA639659 Manual Digital Thermostat Instruction Manual
sygonix 2522212 Installable Thermostat Instruction Manual
EUROTRONIC Programmable Energy-Saving Radiator Thermostat User Manual
ADAX 62208 WiFi Thermostat User Guide
beca BAC-2000-ML Modulating Touch Button Thermostats User Guide
BEOK CONTROLS TDR89 ZIGBEE Thermostat User Guide
Roth SL Car Air Conditioner Thermostat Instructions
AuVerte C501 Thermostat Installation Guide
SunTouch SunStat CommandPlus Programmable Thermostat Instruction Manual