Amana DS01G Digi Smart Thermostat Instruction Manual
to obtain the 15/16” needed between the magnet and the sensor mounting plate on the door frame.
DD01E
THE ALIGNMENT GUIDE
IS AT 15/16” FROM
BACK PLATE.
ALIGNMENT
GUIDES
ON BOTTOM
OF DD01E
CENTER OF MAGNET
(IN HOLDER)
MUST BE 15/16” FROM THE
SENSOR MOUNTING PLATE
SENSOR
MOUNTING
PLATE
IMPORTANT NOTE: When properly installed, the center line mark on the bottom of the DD01E or DD01F will line up with
the center of the line of the magnet holder containing the magnet. Choose magnet position A, B, or C to align the
magnet 15/16” from the back of the DD01E or DD01F.
Door Sensor Operation Verification
NOTE: Do NOT attempt to bind a DD01E unless proper operation has been validated.
To verify that door sensor is installed properly:
1. Install batteries into DD01E OR DD01F and snap sensor onto wall plate.
2. Close the door. Green light in lens should illuminate. Open door and green light will turn off. Repeat this step
several times to ensure door sensor is operating correctly.
Procedure must be accomplished within one minute. If not accomplished within one minute, remove batteries and
repeat Steps 1 & 2.
Configuration Settings
ThePTACcontrolwillautomaticallyself-configuretoworkwiththewallthermostat(DS01EKit)ifinstalledandbound. The
PTACcontrolwillautomaticallyself-configuretoactivatepre-configuredenergymanagementroutinewhentheDD01Eor
DD01FisinstalledandboundtothePTAC.Additionally,thesetbacktimesandsetbacktemperaturescanbechangedusing
theconfigurationsettings.IfyouareusingDP01*orDL01EFrontDeskPlatform,thePTACcontrolwillneedtobeconfigured
to identify its room number placement.
Standard and DS01E Configuration
To enter configuration feature mode:
Press and continue to hold the up and down
arrow keys and quickly press the OFF
key twice within
a two (2) second time frame. You will see “ - - “ displayed. Once you are in the configuration program, you can use
the HEAT button to move UP the various configuration settings or the COOL button to move DOWN the configuration
settings. The + or - keys will move up or down the selectable codes that you can change for each configuration
setting. Ensure that you are in the proper configuration setting before pressing the + or - key as you may accidentally
change a setting that you did not intent to change.
9
| General | Details |
|---|---|
| Name | Amana DS01G Digi Smart Thermostat Instruction Manual |
| Make | Amana |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.66 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Amana MMW-2 Horizontal Digital Wireless non EMS Wall Thermostat Instruction Manual
Amana ATST-CWE-BL-A Smart Thermostat Owner’s Manual
Amana DS01 PTAC Wireless Thermostat User Manual
klima SF300 Thermostat User Manual
BOSCH 8750000270 Radiator Thermostat II Smart Home Radiator Thermostat Instructions
Danfoss 015G3090 React Radiator Thermostat Installation Guide
ROMA HEATING RWI5 Wi5 Wi-Fi Digital Heating Thermostat User Manual
AJAX108846 White Smart Wifi Thermostat Instruction Manual
TPI KT Series Line Voltage Thermostat Instruction Manual
SALUS RT520TX Thermostat User Guide
Honeywell Lyric T5 Wi-Fi Thermostat Installation Guide
HEARTH AND HOME Technologies E474962 Smart Stat Hht Remote Thermostat Instruction Manual
VIMAR 02971 Smart Automation Rotary Dial Thermostat Instruction Manual