Home > Amana > Amana DS01G Digi Smart Thermostat Instruction Manual

Amana DS01G Digi Smart Thermostat Instruction Manual

Door Magnet Installation  
NOTE: Magnet buckets are shipped from the factory with the magnets in position A. The position may change based on  
the door and door frame alignment on page 6.  
Mount the door magnet holder on the front of the door where it will be as close as possible to the bottom of the motion  
sensor but no more then 1/8" from the bottom center of the sensor (DD01E or DD01F) when the door is closed.  
Select the correct slot in the magnet holder (there are three slots) to obtain 15/16" from back of sensor mounting plate  
to the center of the magnet. (If you can easily slide a business card between the magnet and the DD01E or DD01F  
sensor, unit is properly placed vertically.) See image below for magnet and sensor alignment.  
Screw in place with the 2 screws provided. Open and close the door to make sure that the magnet holder and motion  
sensor will not interfere with normal opening and closing of the door. See images on pages five and six.  
ALIGNMENT  
GUIDES  
ON BOTTOM  
OF DD01E  
CENTER OF MAGNET  
(IN HOLDER)  
MUST BE 15/16” FROM THE  
SENSOR MOUNTING PLATE  
SENSOR  
MOUNTING  
PLATE  
Do NOT install batteries until you are ready to test the magnet location with DD01E.  
6
GeneralDetails
NameAmana DS01G Digi Smart Thermostat Instruction Manual
MakeAmana
LanguageEnglish
FiletypePDF (Download)
File size0.66 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Amana MMW-2 Horizontal Digital Wireless non EMS Wall Thermostat Instruction Manual
Amana MMW-2 Horizontal Digital Wireless non EMS Wall Thermostat Instruction Manual
Amana ATST-CWE-BL-A Smart Thermostat Owner’s Manual
Amana ATST-CWE-BL-A Smart Thermostat Owner’s Manual
Amana DS01 PTAC Wireless Thermostat User Manual
Amana DS01 PTAC Wireless Thermostat User Manual

Amana DS01G Digi Smart Thermostat Instruction Manual