neptronic STS3 Series Wall Thermostat Instruction Manual

1

2

Wall Thermostat  

Specification and Installation Instructions  

M

o

d

e

l

s

STS3-11C(10 KΩ)  

STS3-11F(10 KΩ)  

STS3-13C(3.3 KΩ)  

STS3-13F(3.3 KΩ)  

Features  

•

•

Selectable Celsius or Fahrenheit scale  

Sensor 3.3 KΩ or 10 KΩ  

Wall Thermostat  

Technical Data  

Specification  

Description  

STS3-11C  

STS3-11F  

STS3-13C  

STS3-13F  

Can be used with a DF series duct heaters, BM023C actuator, and other Neptronic controllers.  

Scale  

Celsius  

Fahrenheit  

Celsius  

Fahrenheit  

Setpoint Range  

Sensor NTC  

14ºC to 30ºC  

57ºF to 86ºF  

14ºC to 30ºC  

57ºF to 86ºF  

10 KΩ  

3.3 KΩ  

Electrical Connection  

2 wires 0.8 mm² [18 AWG] minimum  

Operating Temperature  

Storage Temperature  

Relative Humidity  

Ingress Protection  

Weight  

2ºC to 35ºC (35ºF to 95ºF)  

0ºC to 50ºC (32ºF to 122ºF)  

5 to 95 % non condensing  

IP 30 (EN 60529)  

68 g. [0.15 lb]  

Dimensions  

A = 3.00” | 78mm  

B = 3.00” | 78mm  

C = 1.00” | 24mm  

D = 2.36” | 60mm  

B

D

A

C

Wiring (Factory Settings)  

P3  

Calibration  

Potentiometer  

P5  

TB1  

Connecting  

Strip  

Temperature  

Sensor  

Mounting Instructions  

CAUTION: Remove power to avoid a risk of malfunction.  

A. Remove the captive screw that’s holding the base and the front cover of the room setpoint sensor enclosure.  

B. Lift the front cover of the enclosure to separate it from the base.  

C. Pull wire through the hole in the base.  

D. Secure the base to the wall using wall anchors and screws (supplied). Make the appropriate connections.  

E. Mount the control module on the base and secure using the screw.  

A

B

C

D

E

Recycling at end of life: please return this product to your Neptronic local distributor for recycling. If you need to find the nearest  

Neptronic authorized distributor, please consult www.neptronic.com.  

STS3-240130  

Page | 1  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	neptronic STS3 Series Wall Thermostat Instruction Manual
Make	neptronic
Language	English
Filetype	PDF (Download)
File size	0.48 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• neptronic

neptronic STS3 Series Wall Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: Wall thermostat specification and installation instructions. Models include STS3-11C, STS3-11F, STS3-13C, and STS3-13F. Features include selectable Celsius or Fahrenheit scale and sensor options of 3.3 KΩ or 10 KΩ. The thermostat can be used with DF series duct heaters, BM023C actuator, and other Neptronic controllers. Setpoint range is from 14ºC to 30ºC (57ºF to 86ºF) for all models. Electrical connection requires 2 wires of 0.8 mm² [18 AWG] minimum. Operating temperature ranges from 2ºC to 35ºC (35ºF to 95ºF). Storage temperature ranges from 0ºC to 50ºC (32ºF to 122ºF). Relative humidity is 5 to 95% non-condensing. Recycling at end of life should be done through a Neptronic local distributor.
• Page 2: Thermostat de pièce Spécification et instruction d'installation Modèles: STS3-11C, STS3-11F, STS3-13C, STS3-13F Caractéristiques: Échelle Fahrenheit ou Celsius, Sonde 3.3 KΩ ou 10 KΩ Peut être utilisée avec un serpentin électrique série DF, un servomoteur BM023C-3 ou un contrôleur TCA ou VVC de Neptronic. Plage d’ajustement du point de consigne: 14ºC à 30ºC (57ºF à 86ºF) Température de fonctionnement: 2ºC à 35ºC (35ºF à 95ºF) Humidité relative: 5 à 95 % non condensé Installation mécanique: Coupez l'alimentation pour éviter un risque de dysfonctionnement. À la fin de sa vie, veuillez retourner ce contrôle électronique à votre distributeur Neptronic local.