Sygonix 2735095 Wireless Indoor Thermostat Instruction Manual

1

2

3

4

5

ꢀ

ꢀ

ꢀ

Please handle the product carefully. Jolts, impacts or a fall even from a low height can  

damage the product.  

Consult a technician when in doubt about the operation, safety or connection of the ap-  

pliance.  

Operating instructions  

Wireless heating thermostat  

If you have questions which remain unanswered by these operating instructions, contact  

our technical support service or other technical personnel.  

Item no. 2735095  

5.2 Installation/connection  

Caution, safety hazard!  

1 Intended use  

The product should only be installed and connected by people with relevant  

electrical knowledge and experience! *)  

This product is a wireless heating thermostat intended for temperature control and can be  

integrated into an electric heating system, such as floor heating or panel radiators.  

If the product is not installed properly, you risk:  

You can schedule the room temperature precisely to the hour to suit your individual needs.  

You can programme the room temperature for 7 days in advance. With six programmable time  

settings a day, you can reduce your heating costs and adjust the temperature in your home to  

your needs. You can save on heating costs when you are on holiday or away on business. The  

holiday mode keeps the temperature in your home constant at a preset level.  

ꢀ

your own life;  

ꢀ

the life of the person using the electrical device.  

If the product is not installed properly, you risk severe damage to property, e.g. due to fire. You  

face the risk of personal liability for personal injury and material damage.  

The wireless heating thermostat is powered by two Mignon batteries (AA). The switching re-  

ceiver is connected directly to the mains voltage. You can also connect a consumer operated  

via the mains voltage supply to the switching receiver and switch it on or off through tempera-  

ture control.  

Always consult an electrician!  

*) Technical knowledge required to perform the installation!  

The following specialist knowledge is required for installation:  

ꢀ

The “Five Safety Rules”: Disconnect from the mains; protect against accidental switch-on;  

ensure there is no voltage; earth and short-circuit; cover or protect adjacent live parts.  

The heating thermostat has a built-in temperature sensor (probe) and allows connecting an  

external sensor to the switching module. The product has a button lock feature that prevents  

incorrect operation and a permanently installed decoupling capacitor for data backup in the  

event of a power failure. This device has an IP20 ingress protection rating and is suitable for  

dry rooms and indoor use. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,  

must be avoided under all circumstances.  

ꢀ

Use of suitable tools, measuring devices and personal protective equipment, where neces-  

sary.  

ꢀ

Analysis of measurement results.  

ꢀ

Use of electrical installation materials to meet the requirements for safe disconnection from  

the power supply.  

For safety and approval purposes, do not rebuild and/or modify this product. If you use the  

product for purposes other than those described above, the product may be damaged. In addi-  

tion, improper use can result in short circuits, fires, electric shocks or other hazards. Read the  

instructions carefully and store them in a safe place. Make this product available to third parties  

only together with its operating instructions.  

ꢀ

IP protection ratings.  

ꢀ

Installation of electrical installation materials.  

ꢀ

Type of power supply (TN system, IT system, TT system) and the corresponding con-  

nection criteria (classic earthing, protective earthing, necessary additional measures, etc.)  

This product complies with the statutory national and European requirements. All company and  

product names contained herein are trademarks of their respective owners. All rights reserved.  

If you do not have sufficient knowledge in all of the aforementioned topics, contact a specialist  

and do not attempt to install or connect the product yourself.  

2 Delivery content  

Further warnings:  

ꢀ

ꢀ

ꢀ

Radio room thermostat  

4x Screw  

ꢀ

The construction of the product corresponds to the protection-class II (double or re-  

ꢀ

Switching module  

Operating instructions  

inforced isolation). Ensure that the insulation of the housing is neither damaged nor  

destroyed.  

3 Up-to-date operating instructions  

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code  

shown. Follow the instructions on the website.  

ꢀ

Before installing the switching module, disconnect all poles from the mains voltage  

using a residual current device (RCD). There must be an appropriately rated fuse or  

circuit breaker between the RCD and the product.  

ꢀ

The device must be de-energised during installation and connection of the switching  

4 Description of symbols  

module. Furthermore, turn off the automatic circuit breaker and the RCD to disconnect  

all poles from the mains voltage. Secure it against unauthorised reconnection, e.g.  

with a warning sign. Then check to ensure there is no voltage with a suitable measu-  

ring device (e.g. a two-pole voltage tester).  

This symbol warns of dangerous voltage that can lead to injury from electric shock.  

Read the information carefully.  

The symbol with the exclamation mark in the triangle indicates important information  

in this document. Always read this information carefully.  

ꢀ

Never connect the product to the power supply immediately after it has been transfer-  

red from a cold room into a warm one (e.g., during transport). The condensation that  

forms may destroy the device. Moreover, there is danger of electric shock!  

The product should only be used in dry, indoor locations. It must not get damp or  

wet.  

ꢀ

Always let the product reach room temperature first. Wait until the condensation has  

evaporated. In some cases, this may take several hours. Only once the condensation  

has evaporated should it be installed, connected to the power supply and put into use.  

The product is designed according to protection Class II (reinforced or double insu-  

lation, protective insulation).  

ꢀ

Do not use the product in rooms with adverse environmental conditions, where com-  

bustible gases, vapours or dust are or may be present! This may cause an explosion!  

Pay attention to the operating instructions!  

5.3 Protection class  

5 Safety instructions  

ꢀ

This device has an IP20 ingress protection rating and is suitable for dry rooms.  

Read the operating instructions carefully and adhere in particular to the safety  

instructions. If you do not heed the safety instructions and information on  

proper handling in these operating instructions, we will assume no liability  

for any resulting personal injury or property damage. Such cases will also  

invalidate the warranty/guarantee.  

ꢀ

There is protection against touching live components and ingress from foreign particles  

>12.5 mm.  

ꢀ

There is no protection against water, combustible gases, and vapours.  

5.1 General information  

ꢀ

This product is not a toy. Keep it out of the reach of children and pets.  

ꢀ

Do not leave packaging material lying around carelessly, as it could become a dangerous  

plaything for children.  

ꢀ

Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,  

moisture, flammable gases, vapours and solvents.  

ꢀ

Do not expose the product to any mechanical stress.  

ꢀ

If it is no longer possible to operate the product safely, take it out of operation and protect  

it from any accidental use. Safe operation can no longer be guaranteed if the product:  

–

–

–

–

is visibly damaged,  

is no longer working properly,  

has been stored for extended periods in poor ambient conditions or  

has been subjected to any serious transport-related stress.  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Sygonix 2735095 Wireless Indoor Thermostat Instruction Manual
Make	Sygonix
Language	English
Filetype	PDF (Download)
File size	0.79 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Sygonix

Sygonix 2735095 Wireless Indoor Thermostat Instruction Manual Overview

Summary of Contents

• Page 1: Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product. Consult a technician when in doubt about the operation, safety or connection of the appliance. The product should only be installed and connected by people with relevant electrical knowledge and experience. This product is a wireless heating thermostat intended for temperature control and can be integrated into an electric heating system. You can schedule the room temperature precisely to the hour to suit your individual needs. The wireless heating thermostat is powered by two Mignon batteries (AA). The heating thermostat has a built-in temperature sensor and allows connecting an external sensor to the switching module. The product has an IP20 ingress protection rating and is suitable for dry rooms and indoor use. Do not use the product in rooms with adverse environmental conditions, where combustible gases, vapours or dust are or may be present. Read the operating instructions carefully and adhere in particular to the safety instructions.
• Page 2: Icons indicate various functions of the wireless thermostat and switching module. The wireless thermostat has modes including auto, manual, and holiday. The power button turns the device ON/OFF and toggles between modes. Advanced options can be accessed by holding the button for 3-5 seconds. The switching module has multiple functions for setting time, day, and holiday mode. Installation instructions include connecting the mains power supply and consumer. The display shows current time, programmable periods, and temperature settings. Proper installation height for the thermostat is approximately 1.5 meters above floor level. Cables should be protected from sharp edges and not fastened with nails or screws. The thermostat is ready to use after replacing the front panels and turning on the mains voltage.
• Page 3: Programming the weekly schedule involves configuring temperature settings for six time periods throughout the day. You can turn the wireless heating thermostat on and off by pressing the button. When the thermostat is switched off, the display goes out and no temperature control takes place. Default times and temperatures for each period are specified, including wake up, outdoor, back home, and sleep settings. To set the time and weekday, ensure the thermostat is in normal status and adjust values as needed. You can switch between automatic and manual mode by accessing the settings menu and selecting the desired program. Parental control lock can be activated to restrict button access, with options for different levels of lock. Holiday mode allows you to set a time and temperature for days when you will be away, with settings saved automatically. Adjusting system settings may cause unexpected behavior, so instructions should be read carefully. To exit holiday mode, simply press the button to return to manual or auto mode.
• Page 4: Display code factory default System settings calibration temperature deviation Adjustment range -9 to +9 °C If the thermostat measures a temperature of +20 °C with a setting of 1 °C, the thermostat will switch on the heating at +19 °C and again off at +21 °C. An error code will show if there is a problem with the internal or external sensor. Set the lowest selectable temperature. The heater will turn on automatically if the sensor measures the temperature below the preset value. This feature prevents the floor temperature from increasing excessively. The transmission range of the radio signals between the temperature controller and a suitable radio receiver is up to 200 m under optimal conditions. This product does not require maintenance.
• Page 5: Disposal This symbol must appear on any electrical and electronic equipment placed on the EU market. Owners of WEEE shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators must be removed by end users from the WEEE in a non-destructive manner. Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. End users are responsible for deleting personal data from the WEEE to be disposed of. Different obligations about the return or recycling of WEEE may apply in countries outside of Germany. Batteries/rechargeable batteries must not be disposed of in the normal household waste. Batteries/rechargeable batteries containing hazardous substances are labelled to indicate that disposal in household waste is forbidden. Used batteries can be returned to collection points in your municipality or wherever batteries are sold. Batteries should be protected against short circuit and their exposed terminals should be covered completely with insulating tape before disposal. Technical data Rated voltage for the thermostat is 3 V, using 2x Mignon batteries (AA). Temperature adjustment range for the thermostat is +1 to 70 °C. Protection rating for both the thermostat and switching module is IP20. The switching module has a rated voltage of 90 to 240 V/AC, 50/60 Hz. The maximum connected load for the switching module is 3000 W for resistive load. Dimensions for the thermostat are 86 x 86 x 30 mm and it weighs 120 g without batteries. The transmission/reception frequency for the switching module is 433.00 to 433.89 MHz.