sygonix 3026090 WiFi Thermostat Installation Guide

1

2

3

5 Safety instructions  

Read the installation instructions carefully and especially observe the  

safety information. If you do not follow the safety instructions and informa-  

tion on proper handling, we assume no liability for any resulting personal  

injury or damage to property. Such cases will invalidate the warranty/guar-  

antee.  

Installation Instructions  

Wi-Fi Thermostat  

Item no: 3026090  

5.1 General  

1 Product documentation  

■

■

The product is not a toy. Keep it out of the reach of children and pets.  

Do not leave packaging material lying around carelessly. This may become dangerous  

playing material for children.  

■

■

If you have questions which remain unanswered by this information product, contact our  

technical support service or other technical personnel.  

Maintenance, modifications and repairs must only be completed by a technician or an  

authorised repair centre.  

The product is documented by different sets of instructions:  

■

■

Installation instructions  

5.2 Electrical installation  

WARNING! Safety hazard!  

Operating instructions (for download only)  

Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the  

instructions (or new/current versions if available). Follow the instructions on the web page.  

The product should only be installed by people with relevant electrical knowledge and exper-  

ience! *)  

2 Intended use  

If it is not installed properly, you risk:  

The product is a Wi-Fi thermostat for fixed indoor installation. The product is intended to con-  

trol a mains operated load via temperature control.  

■

■

■

■

your own life  

the life of user of the electrical device  

severe damage to property, e.g., by fire  

personal liability for personal injury and material damage  

The product can be controlled via touch display and the Tuya mobile app Smart Life/Smart  

Living.  

The product is equipped with an internal and external sensor (probe). The external sensor  

can be used to measure the temperature in a different location to the thermostat, such as on  

the floor with an electric floor heating system.  

Always consult an electrician!  

*) Technical knowledge required to perform the installation:  

For the installation, the following specialist knowledge is required in particular:  

■

The product is equipped with a backup battery to temporarily maintain the settings during  

power outages.  

The “Five safety rules”: Disconnect from the mains; protect against accidental switch-on;  

ensure there is no voltage; earth and short-circuit; cover or protect adjacent live parts  

This device has an IP20 ingress protection rating and is suitable for dry rooms and indoor  

use. Contact with moisture, e.g. in bathrooms, must be avoided under all circumstances. The  

operating conditions shown in the "Technical data" must be strictly followed.  

■

Use of suitable tools, measuring devices and personal protective equipment, where ne-  

cessary  

The product is intended for indoor use only. Do not use it outdoors.  

Contact with moisture must be avoided under all circumstances.  

■

■

■

■

■

Analysis of measurement results  

Use of electrical installation materials to meet the requirements for disconnection  

IP protection ratings  

If you use the product for purposes other than those described, the product may be dam-  

aged.  

Installation of electrical installation materials  

Improper use can result in short circuits, fires, electric shocks or other hazards.  

The product complies with the statutory national and European requirements.  

For safety and approval purposes, you must not rebuild and/or modify the product.  

Type of power supply (TN system, IT system, TT system) and the corresponding con-  

nection criteria (classic earthing, protective earthing, necessary additional measures etc.)  

If you are not a professional, do not do it yourself, have it performed by a specialist.  

Read the installation instructions carefully and store them in a safe place. Make this product  

available to third parties only together with the installation instructions.  

5.3 Handling  

■

Handle the product carefully. Jolts, impacts or a fall even from a low height can damage  

the product.  

All company names and product names are trademarks of their respective owners. All rights  

reserved.  

5.4 Operating environment  

3 Delivery contents  

■

■

Do not place the product under any mechanical stress.  

■

■

■

Thermostat  

2x Mounting screws  

Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam  

and solvents.  

■

External sensor  

Installation instructions  

■

■

4 Description of symbols  

The following symbols are on the product/appliance or are used in the text:  

Protect the product from high humidity and moisture.  

Protect the product from direct sunlight.  

5.5 Operation  

Read the operating instructions carefully.  

■

Consult an expert when in doubt about the operation, safety or connection of the  

product.  

■

If it is no longer possible to operate the product safely, take it out of operation and pro-  

tect it from any accidental use. DO NOT attempt to repair the product yourself. Safe op-  

eration can no longer be guaranteed if the product:  

The symbol warns of hazards that can lead to personal injury.  

The symbol warns of dangerous voltage that can lead to personal injury by elec-  

tric shock.  

– is visibly damaged,  

– is no longer working properly,  

– has been stored for extended periods in poor ambient conditions or  

– has been subjected to any serious transport-related stresses.  

Protection class 2 (double or reinforced insulation, protective insulation).  

5.6 Battery  

This product must only be used in dry, enclosed indoor areas. It must not become  

damp or wet.  

■

■

Correct polarity must be observed while inserting the battery.  

The battery should be removed from the device if it is not used for a long period of time  

to avoid damage through leaking. Leaking or damaged batteries might cause acid burns  

when in contact with skin, therefore use suitable protective gloves to handle corrupted  

batteries.  

■

■

Batteries must be kept out of reach of children. Do not leave batteries lying around, as  

there is risk, that children or pets swallow them.  

Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-  

rechargeable batteries. There is a risk of explosion!  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	sygonix 3026090 WiFi Thermostat Installation Guide
Make	Sygonix
Language	English
Filetype	PDF (Download)
File size	0.11 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Sygonix

sygonix 3026090 WiFi Thermostat Installation Guide Overview

Summary of Contents

• Page 1: Safety instructions emphasize the importance of following installation instructions and safety information to avoid personal injury or property damage. The product is a Wi-Fi thermostat intended for fixed indoor installation to control mains operated loads via temperature control. Improper installation can lead to severe consequences, including personal injury, property damage, and personal liability. The product features an internal and external sensor for temperature measurement in different locations. Installation should only be performed by individuals with relevant electrical knowledge and experience. The product has an IP20 ingress protection rating and is designed for dry indoor use only, avoiding contact with moisture. Users must handle the product carefully to prevent damage from jolts or falls. The product must not be modified or rebuilt for safety and approval purposes. Batteries should be removed if the device is not used for an extended period to prevent damage from leaking. Proper battery handling is crucial, including observing correct polarity and keeping batteries out of reach of children.
• Page 2: Drilling When penetrating the surface, ensure no cables or pipes are damaged. Inadvertently penetrating electric cables causes the life-threatening danger of an electric shock. Check for concealed wires and pipes before drilling or inserting fasteners. Declaration of Conformity (DOC) Conrad Electronic SE declares that this product conforms to the 2014/53/EU directive. Disposal This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE shall dispose of it separately from unsorted municipal waste. Batteries/rechargeable batteries Remove batteries/rechargeable batteries and dispose of them separately from the product. According to the Battery Directive, end users are legally obliged to return all spent batteries/rechargeable batteries. Important If the load requires a protective earth connection, it must be connected separately. Technical data The product is ready for use. Protection class is Class II. Input voltage is 90 – 240 V/AC. Selecting the sensor type After installing the product, set the required sensor type to ensure correct functioning. Thermostat Temperature setting range is +1 to +70 °C. Temperature display range is +1 to +70 °C.
• Page 3: Display accuracy is ±0.5 °C. The external sensor type is NTC (10k) 1%. Sensor wire length is 2.5 m. The display is a touch display. Display type is LCD (IPS) with a resolution of 480 x 480 pixels. Display dimensions are 71 x 61 mm. The display lock function is available. Password protection is included with a master password of 361000. The Wi-Fi standard is IEEE 802.11b/g/n, 2.4 GHz. Operating temperature ranges from 0 to +50 °C.