Home > HEATIT > WIFI Temp2 Battery Operated Thermostat Installation Guide

WIFI Temp2 Battery Operated Thermostat Installation Guide

Wires must be stripped 9-10mm. Wires can be released by pressing the  
connector’s release switch. Floor sensor must be placed into a protective  
tube when used in concrete. Make sure there is no water in the tube.  
Next, position the thermostat and fasten it onto the wall mounting  
box using 2-4 screws. Open the frame retaining spring, position the  
frame and close the spring. Then attach the front part, making sure the  
connector between the front and bottom parts are correctly placed.  
Press the front part until it snaps in place. The front part may later be  
removed by pressing the ejector latch.  
5. CONTROLS  
The thermostat is controlled by three touch sensitive buttons:  
Left (Up)  
Center (Confirm)  
Right (Down)  
Each button has its own background light. When the background light is lit on  
a button, the button is available for use.  
Tip: Holding the left button for 2 seconds at any time will make a quick return  
3. STARTUP  
to the main screen.  
After connecting the power to the thermostat for the first time or after  
performing a factory reset, the startup wizard will prompt the following  
questions:  
Tip: While browsing the thermostat menu, pause at any menu item for a  
moment, and a help text will be shown. This help text gives useful information  
and guides the user through the functions related to that menu item. The help  
text delay can be adjusted underSettings”in the main menu.  
Language  
Set language  
Set timezone  
Daylight saving  
Date & time  
Timezone compared to GMT  
Daylight saving in use Y/N  
Set current date & time  
6. STANDBY AND MAIN SCREEN  
If the thermostat is not touched for a while, it will automatically go to standby  
screen. While in standby, touching any of the buttons will display the main  
screen below:  
Thermostat use  
Heating system  
Floor type  
Heating or Cooling  
Floor (Slow), Floor (Fast), Other (Fast)  
Concrete or wooden  
1
Floor Temp limit  
Choice of sensor  
Gradual Heating  
5°C - 40°C (concrete) or 5°C - 27°C (wood)  
Room/Floor  
ON or OFF - used with new concrete floors  
to limit temperature rise time. Only in floor  
sensor mode.  
°C  
2
3
Note: Wooden floors require a floor sensor to be connected, in order to  
4
5
HOME  
10:40  
set the floor temperature limit to 27°C.  
4. SYMBOLS  
1. WiFi indicator  
2. Measured temperature  
3. Heating switched on/off  
4. Operation mode  
5. Time  
Home  
Away  
Power regulation  
Week schedule  
Anti-frost  
In the main screen, pressing the center button will access the main  
menu. Pressing the left or right button will change the set temperature.  
4.1 Operation mode  
7. MENU ITEMS  
Heating enabled  
Cooling  
The main menu has the following items:  
Cooling enabled  
Operation Mode  
Schedule  
See point 8: ”Operation Mode”  
See point 9: ”Weekly schedule”  
Adjust the settings  
4.2 Heating/Cooling Active  
Settings  
Wooden floor has reached the maximum temperature of  
27°C, thus heating is being limited.  
WiFi  
Adjust WiFi settings  
Energy consumption  
Child Lock  
Info  
Show energy consumption  
Activate lock  
4.3 Note  
Thermostat information  
Switch thermostat on/off  
Shut down  
Gradual heating  
Gradual heating will raise the temperature slowly over the  
course of 20 days. This is mainly user for new installations.  
Tip: “Energy Consumptionshows consumption statistics over different  
time periods. Press center button to reset statistics.  
Tip: Select “Child Lockand press center button three times to activate/  
deactivate the lock.  
°C  
GRADUAL  
10:40  
GeneralDetails
NameWIFI Temp2 Battery Operated Thermostat Installation Guide
MakeHEATIT
LanguageEnglish
FiletypePDF (Download)
File size0.75 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
heatit Z-TRM6 DC Z Wave Electronic Thermostat Instruction Manual
heatit Z-TRM6 DC Z Wave Electronic Thermostat Instruction Manual
HEATIT Z-TRM3 Thermostat User Guide
HEATIT Z-TRM3 Thermostat User Guide
Heatit Z-TEMP2 Thermostat Installation Guide
Heatit Z-TEMP2 Thermostat Installation Guide
heatit Z-TRM3 WiFi Thermostat Instruction Manual
heatit Z-TRM3 WiFi Thermostat Instruction Manual
HEATIT Z-Temp3 is a Battery Operated Thermostat Instruction Manual
HEATIT Z-Temp3 is a Battery Operated Thermostat Instruction Manual
4512673 Heatit ZM Thermostat 16A User Guide
4512673 Heatit ZM Thermostat 16A User Guide
HEATIT Z-TRM6 Matt Z-Wave Thermostat User Guide
HEATIT Z-TRM6 Matt Z-Wave Thermostat User Guide
HEATIT 54 304 59 DIN Smart Thermostat Installation Guide
HEATIT 54 304 59 DIN Smart Thermostat Installation Guide
HEATIT 54 305 41 WiFi6 Thermostat Installation Guide
HEATIT 54 305 41 WiFi6 Thermostat Installation Guide
HEATIT Z-TEMP3 Thermostat User Guide
HEATIT Z-TEMP3 Thermostat User Guide

WIFI Temp2 Battery Operated Thermostat Installation Guide