Home > Schneider Electric > Schneider Electric 2290B Programmable Room Thermostat Instruction Manual
Schneider Electric 2290B Programmable Room Thermostat Instruction Manual
(Si Option 01) Si Status
Enable or disable Service Interval Mode.
The Drayton Digistat thermostat is a universal thermostat with
24 hour, 5-2day or 7day program types and up to 8 time/
temperature events per day and can also be used as a simple
room thermostat.
(Si Option 02) Si Type
Select effect imposed on the heating when service is due.
(Si Option 03) Service Due Date
Set date when next service is due.
Clock Setting
Your Digistat is fitted with a “real-time clock”, which is pre-set at
the factory; you will not have to alter the time settings. A special
feature of this real-time clock is it will automatically change over
during the GMT/BST summer/winter change-over, removing the
need to manually alter the clock at these times.
(Si Option 04) Warning
Select no. of days before service due date.
(Si Option 05) Service Due Alarm
Enable or disable the audible service due alarm.
General Operation
(Si Option 06) Si Boost
Programmable thermostats do not have “On” and “Off” times
like traditional timers. They offer temperature control both day
and night and you simply select which temperatures you require
at each point in the day.
Enable or disable the Service Boost feature (5 boosts).
(Si Option 07) Password Reset
Change the 4 digit PIN. If you forget your Si password, please
call the Technical Helpline.
With the unit in “Auto Mode” (the calendar icon is visible at the
bottom of the screen) the temperature can be changed for a
short time by using the + and – buttons. Changing the
temperature in this way will keep the Digistat set to your
new temperature until the next pre-programmed event (at which
time it will revert to programmed temperature). The temperature
you are setting will flash on the screen. Once temperature is set,
the unit will revert to showing the room temperature again. The
indicator will show on the screen
Technical Data
Power supply
2x AA 1.5V alkaline batteries
3(1)A at 230V/50Hz
Switch type & rating
Min. recommended
current
SPDT (voltage free contacts)
10mA@24VAC (inductive)
Operating: 0°C to +40°C
Storage: -20°C to 65°C
Ambient temperature
if the unit is calling for heat.
Ambient humidity
(non condensing)
Programming the Digistat
20% to 80%, 90% non-condensing
Your Digistat comes with the following settings
pre-programmed for your convenience and is suitable for
those working out of the house during a typical 9-5 pattern.
When the 5-2day program type is selected the pre-set
temperatures will be different Mon-Fri and Sat-Sun, as per
the tables below:
Temperature range
Rated impulse voltage
Ball pressure test
5°C to 30°C
4KV
75°C
Disconnection means
Automatic action
1B
Pre-set Program 1 (24h, 5-2day weekdays, or 7day):
100,000 cycles
2402-2480 MHz
Event
1
2
3
4
(5)*
(6)
(7)
(8)
Operating Frequency
Time
06:30 08:30 16:30 22:30
Max RF Power
transmitted
Temperature 20°C 16°C 21°C OFF
+10dBm
Pre-set Program 1 (5-2day weekend):
Pollution situation
Protection level
Degree 2
IP30
Event
1
2
3
4
(5)*
(6)
(7)
(8)
Time
07:00 09:00 16:00 23:00
Designed for fixed wiring only, to comply
with IEE wiring regulations
Wiring
Temperature 20°C 18°C 21°C OFF
*To add these additional time periods manually (max. 8 per day)
please refer to the steps to the right.
Energy Class
IV = 2%
Relevant EC Directives:
2014/53/EU (RED)
2011/65/EU (RoHS)
2012/19/EU (WEEE)
®
The Bluetooth word mark and logos are registered trademarks
EN 60730-1
Standards:
owned by Bluetooth SIG, Inc. and any use of such marks by
Schneider Electric is under license. Other trademarks and trade
names are those of their respective owners.
EN 60730-2-7
EN 60730-2-9 ESTI EN
300 328 ESTI EN 301
489 EN 50581
EN 15500
| General | Details |
|---|---|
| Name | Schneider Electric 2290B Programmable Room Thermostat Instruction Manual |
| Make | Schneider Electric |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.22 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Schneider Electric CCTFR6100Z3 Wiser Radiator Thermostat User Manual
Schneider Electric CFMT02ZB Flush-Mounted Thermostat Instruction Manual
Schneider Electric Wiser Radiator Thermostat Instructions
Schneider Electric TC-2931 Changeover Thermostat Instruction Manual
Schneider Electric TC900 Series Space Logic Thermostat Instruction Manual
GENERAL LIFE FH250 Floor Heating Room Thermostat User Manual
ENSTO ECO10BTW-J Heat Control Thermostat Instruction Manual
DIGITEN DTC-101, DTC-151 Thermostat User Manual
AprilAire S86W MUPR WiFi Thermostat User Guide
Braebur 1230 Non Programmable Thermostat Instruction Manual
STEGO Type STO-STS 011 Mechanical Thermostat Instruction Manual
Thalos Key 230 Bianco Touch Screen Wall Thermostat Instruction Manual
STELPRO ASSO Series Integrated Thermostat Installation Guide
Danfoss TPOne-RF Electronic Programmable Room Thermostat Installation Guide
PRO1 T771 Programmable Electronic Thermostat Instructions