Home > PNI > PNI-CT40 Smart Wireless Thermostat User Manual

PNI-CT40 Smart Wireless Thermostat User Manual

If the thermostat status in the application is Offline, the signal  
icon blinks on the screen, the LED 1 indicator on the receiver unit  
is off and the units do not communicate with each other, perform  
the pairing procedure below:  
Long press the pairing button on the receiver unit until LED 1  
blinks quickly.  
Turn off the screen of the control unit by pressing the on/off  
button.  
When the screen is off, press and hold the M button on the control  
unit until a 4-digit code appears on the screen.  
Immediately press the Up button to pair with the receiver unit.  
LED 1 blinks rarely and then goes out.  
The signal icon blinks for a few seconds aſter which it remains on  
confirming that the pairing is complete.  
Test the functionality by changing the set temperature (SET) and  
watch the triggering of the relay in the receiver unit.  
Delete paired units  
Turn off the receiver unit by briefly pressing the on/off button.  
The two LEDs will turn off.  
With the receiver off, press and hold the pairing and on/off buttons  
simultaneously until the two LEDs light up at once. Release the  
8
GeneralDetails
NamePNI-CT40 Smart Wireless Thermostat User Manual
MakePNI
LanguageEnglish
FiletypePDF (Download)
File size0.74 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
PNi CT36PRO Smart Thermostat Instruction Manual
PNi CT36PRO Smart Thermostat Instruction Manual
PNI CT25PW WIFI Smart Thermostat User Manual
PNI CT25PW WIFI Smart Thermostat User Manual
PNi ACRF8508 Wireless Programmable Room Thermostat Instruction Manual
PNi ACRF8508 Wireless Programmable Room Thermostat Instruction Manual

PNI-CT40 Smart Wireless Thermostat User Manual