Milesight WT30x Smart Fan Coil Thermostat User Guide
Set Temperature
Keycard Status
Configuration Mode
External Server
Temperature
06
07
08
INT8/2, Unit: °C
00: Disconnected, 01: Connected
00: Programme, 01: Manual
09
0f
INT8/2, Unit: °C
All Data
Reports all above data in order
Examples:
1. Periodic packet: report as reporting interval (1 minute by default) or when pressing the button
to change the settings.
55 01 000a 0f 01000001332a000034 02
Start
55
ID
Data Length Data Type
Data Content
01=Turn On
Checksum
00=Button Lock Disable
00=Cooling
01=High
00 0a=10
0f
Bytes
01
33=>51/2=25.5°C (Room Temp.)
2a=>42/2=21°C (Set Temp.)
00=Keycard is disconnected
00=Programme Mode
34=>52/2=26°C (External Temp.)
02
6.2 Downlink Control Commands
WT30x supports downlink commands to configure the device. The application port is 85 by
default. The command is based on following format (HEX):
Start
55
ID
Command Length
2 Bytes
Command
Checksum
1 Byte
01
2 Bytes or 8 Bytes
The Command part is consist of Type ID (1 Byte) and Command Content (1 Byte or 7 Bytes) :
Item
Type
01
Command & Description
00: Off, 01: On
Turn On/Off
Button Lock
02
01: Enable, 00: Disable
System Mode
Fan Mode
03
00: Cooling, 01: Heating, 02: Ventilation
00: Auto, 01: High, 02: Middle, 03: Low
INT8/2, Unit: °C
04
Set Temperature
Configuration Mode
05
06
00: Programme, 01: Manual
16
| General | Details |
|---|---|
| Name | Milesight WT30x Smart Fan Coil Thermostat User Guide |
| Make | Milesight |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.31 MB |

Milesight WT201-868M Smart Thermostat User Guide

Milesight WT201 Airteq Smart Thermostat User Guide

Milesight WT101 Smart Radiator Thermostat User Guide

Milesight WT201 Smart Thermostat User Guide
































