GENERAL LIFE NORA 270S RF Wireless Room Thermostat User Manual

1

2

ProductDisplayLayout  

RECEIVER WIRING DIAGRAM  

ENGLISH  

AC  

COM  

NO  

(230V)  

5

6

7

DIGITAL ROOM THERMOSTAT  

generallife.com.tr  

1

2

3

BATTERY PLACEMENT  

NORA 270S RF USER MANUAL  

4

HEATING/COOLING UNIT  

GENERAL SPECIFICATIONS  

Warning!  

Operations within the heating / cooling unit or the electrical installation  

must be carriedout byprofessionally qualified persons.  

1

2

3

4

Room Temperature  

NORA 270S RF is a wireless room thermostat. The user can adjust the room  

temperature with the required temperature and get more comfortable and  

economic heating/cooling.  

Set Temperature  

Economy Mode  

Comfort Mode  

Heating Indicator  

 Different Mode Options (Comfort Mode and Economy Mode)  

PAIRING THE ROOM THERMOSTAT AND THE RECEIVER  

Primarily press the sync button of receiver for 2 seconds and see blinking  

5

- If the Heating Indicator is blinking, the heating unit is working.  

- If the Heating Indicator is steady, the heating unit is not working.  

Cooling Indicator  

- If the Cooling Indicator is blinking, the cooling unit is working.  

- If the Cooling Indicator is steady, the cooling unit is not working.  

Battery Indicator  

 PreciseTemperatureMeasurement  

 Heating Calibration  

ON/OFFControl  

WirelessConnection  

TPIAlgorithm  



green light of receiver.  



While your device is turned off, press and hold the "On/Off"button for 3  

seconds.  

 Heating/Cooling Modes  

6

7

As shown in the picture above, press the screwdriverforward from the space  

shown, bend the tabs and separate the front cover. Insert 2 new AAA alkaline  

batteries in the battery housing with the correct battery direction. Replace  

both batteries at the same time. Then align the front part of your Room  

Thermostatto the backand squeezeittowards theback.  

NORA 270S RF AND EQUIPMENTS  

NORA 270S RF Room Thermostat  





Press thebutton until the “  

” menu appears.  

Holder  

Alkaline Battery  

Press the "+" or "-" button of your Room Thermostat while the LED is  

flashing green.  

RECEIVER  





If the pairing is successful, the green flashing LED on the receiver will be  

constant.  

1-Manual Operation Button:  

Deactivates the Receiver and allows you to  

use heating/cooling unit manually.  

2-Pairing Button:  

1

2

3

LowBattery Warning:When the“ ” icon appears on the screen, itmeans  

“low battery warning”. Itis recommended to replacethebatterieswhen this  

warning appears.  

Receiverand Room Thermostathavebeen paired to each other.  

ROOM THERMOSTATTEMPERATURE CALIBRATION  

Temperature sensors which are used in Room Thermostats are highly  

sensitive. You mayneed to calibrate yourRoom Thermostat if youwould like  

to get the same temperature values with other thermometers in your living  

space.  

Allows to pair the Receiver with the Room  

Thermostat.  

3-Receiver LED Light  

4-Receiver Power Cable Input  

5-Heating/Cooling Unit Connection Cable  

Input  

Dowels and Screws  

Receiver  

Warning: When the product is not used for a long period (more than 15 days),  

removethebatteries. Otherwise, malfunctions thatmay occurwould beoutof  

warranty.  

Please throwyourdead batteries into thewaste bin forbatteries.  



While your device is turned off, press and hold the "On/Off"button for 3  

seconds.  

RECEIVER PLACEMENT  



Press the "On/Off" button until the “  

” menu appers. In order to see the  

4 5  

RECEIVER LED DESCRIPTIONS  

The important things to note for the Receiver  

placementis avoidingphysical contactbetweenthe  

Receiverand heating/cooling unit, and protecting it  

against materialssuch asliquid, dust etc.  

desired temperature, set the temperature difference by press the  

“Temperature Adjustment Buttons”. This value can be arranged between  

“-8^oC" and “+8^oC".  

TECHNICAL DATA  

Room Thermostat  

Dimensions  

Operating Current  

85mm / 125mm / 19.2mm  

3V DC (2 x AAA alkaline battery)  

Steady Red  

Receiver has power but Receiver and Room  



To save the settings and exit, press the "On/Off" button until the device  

turns off.  

Thermostat are not paired.  

Temperature Measurement Accuracy 0.1^oC  

Thedevicesshouldbeplacedin ordertominimizethedamagetothe  

receivedand transmittedsignals bypayingattentiontothefollowingpoints;  

Note:Recommended tempreturecalibration is “0.0^oC”.  

Blinking Green  

Steady Green  

Waiting for pairing signal from the Room Thermostat.  

Receiver and Room Thermostat are paired.  

Heating/cooling unit is not operating.  

Operate the heating/cooling unit signal has reached  

to the Receiver.  

Operating Temperature Range  

Battery Life  

Operating Temperature  

Storage Temperature  

(5^oC) – (30^oC)  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  





The devicesshould not be mounted on metalsurfaces.  

The devices should not be installed close to electrical cables and  

electronic equipment such ascomputers and televisionunits.  

The devices should not be installed near large metal structures or other  

building materials using fine metal meshes such as special glass or  

special concrete.  

FACTORY SETTINGS RESET  

3 Short Orange  

Blinking  

You can reset your Room Thermostat to its default factory settings. This  

operation resets the mode temperature values, calibration setting and  

heating/coling modes to factory setting. To reset your Room Thermostat to  

factory setting:  

Steady Orange  

3 Short Green  

Blinking  

Heating/cooling unit is operating.  

Shut the heating/cooling unit down signal has  

reached to the Receiver.  



Receiver  

Dimensions  

Operation Current  

Relay NO Switching Current  

90mm / 90mm / 25mm  

230V AC  

7A (240VAC – Resistive load)  

10A (120VAC – Resistive load)  

(-20^oC) – (+60^oC)  

Blinking Orange  

Heating/Cooling unit operates in manual mode.  



While your device is turned off, press and hold the "On/Off"button for 3  

seconds.  





Distance between the Room Thermostat and the Receiver should not  

exceed 20metersor 2 floors.  

Blinking Red  

Receiver did not get any signal from the Room  

Thermostat for 22 minutes or longer.  

Heating/cooling unit has shut down.  





Pressthe“On/Off” button until “  

While in the “ ” menu, select the “  

and press the “On/Off” button.  

Your devicewill be turned off and resetto factory settings.  

” menu appears.  

Receiver must be installed at least 50 cm away from the heating/cooling  

unit.  

” option by using “+” or “-” buttons  

Storage Temperature  



ROOM THERMOSTAT PLACEMENT  

RECEIVER SETUP  

ROOM THERMOSTAT  

Buttons Functions  

Room Thermostat needs to be placed in the room which is used most  

frequently. For instance; living room or lounge. Placing the Room  

Thermostat in a spot that have air circulation like entrance of a room or side  

of window should be avoided. Also anywhere close to heating/cooling units  

such as radiator, stove and spots which get direct sun lights would not be  

suitable. Room Thermostat needs to be located above the floor 150 cm  

height. Fewtrialsmaybe made to find themost convenientspot.  



First, shut down your heating/cooling unit and your heating/cooling unit's  

power sourcewith allelectricalcurrent(fuse, socketetc.)  

As shown in the connection diagram, connect one end of the heating /  

cooling unit connection cable to the COM and the other to the NO input of  

the Receiver.  

MODE SETTINGS  

There are 2 modes in the Room Thermostat. These are Comfort Mode “  

”



and Economy Mode “ ”. Modes work according to the pre-set temperature  

valuesadjusted byuser.  

1

2

In order to change thecomfort mode temperaturevalue;  



Connect the other ends of the cable -which you connected to the Receiver  

to room thermostat connection terminal as shown in your heating /  

cooling unit's user manual.  







Press and hold thecomfort mode button for 3 seconds.  

Change the temperaturevaluebypressing “+” or “-“ buttons.  

Press the comfort mode button once to save the changes you have made  

or wait10seconds.  

3

4

5







You must first connect the Receiver power cable to the Receiver and then  

to the fuse to which the heating/cooling unit is connected.  

After completing the cable connection process, firstly turn on your fuse  

and then yourheating/cooling unit.  

6

In order to change the economy mode temperaturevalue;  







Press and hold theeconomy mode button for 3 seconds.  

Change the temperaturevaluebypressing “+” or “-” buttons.  

Press the economy mode button once to savethe changes youhavemade  

or wait10seconds.  

By pressing the Receiver's manual usage button for 2 seconds, youshould  

see the Orange Light blinking on the Receiver. In this way, after making  

sure that the heating/cooling unit is operating, press the same button  

again for 2 seconds and seethattheOrangeLEDturns off.  

Set up the Room Thermostat to pair the Receiver with the Room  

Thermostat.  

1

2

3

4

5

6

Economy Mode  

Temperature Adjustment (Increasing)  

Comfort Mode  

Heating/Cooling Modes  

Temperature Adjustment (Decreasing)  

ON/OFF and Setting Button  



You can use the“+” and “-” buttons to use theRoom Thermostatmanually.  

1

2

3

4

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE NORA 270S RF Wireless Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.3 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE NORA 270S RF Wireless Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Product display layout Receiver wiring diagram Nora 270S RF is a wireless room thermostat. The user can adjust the room temperature for more comfortable and economic heating/cooling. Different mode options include comfort mode and economy mode. Battery placement instructions for the thermostat. Warning: Operations within the heating/cooling unit or the electrical installation must be carried out by professionally qualified persons. Temperature sensors in room thermostats are highly sensitive and may require calibration for accurate readings. Receiver placement should avoid physical contact with heating/cooling units and protect against liquids and dust. The device should not be mounted on metal surfaces or near electrical cables and electronic equipment. Factory settings can be reset to restore default temperature values and calibration settings.
• Page 2: Warranty conditions state that the warranty period starts from the invoice date and covers manufacturing defects for 5 years. The room thermostat sends a status signal to the receiver every 10 minutes to ensure synchronized operation. If the signal is lost for 22 minutes, the receiver stops heating or cooling for safety. The TPI algorithm in the thermostat predicts temperature changes to maintain the set temperature efficiently. Devices are delivered in working condition, and on-site commissioning incurs a service fee. Repairs under warranty are conducted at the company factory, with transportation costs borne by the customer for on-site services. Malfunctions caused by customer misuse are not covered by the warranty. The learning process of the TPI thermostat restarts if the device is moved or de-energized. Customers must report any product damages within the warranty period to maintain their rights. The warranty does not cover damages from unauthorized use or external factors like natural disasters.