GENERAL LIFE NORA 270S Digital Room Thermostat User Manual

1

2

ScreenIndicators  

As shown in the picture, press the screwdriver forward from the space  

shown, bend the tabs and separate the front cover. Insert 2 new AAA  

alkaline batteries in the battery housing with the correct battery  

direction. Replace both batteries at the same time. Then align the  

front part of your Room Thermostat to the back and squeeze it  

towards the back.  

ENGLISH  

5

6

7

DIGITAL ROOM THERMOSTAT  

generallife.com.tr  

1

Low Battery Warning: When the “ ” icon appears on the screen, it  

means “low battery warning”. It is recommended to replace the  

batterieswhen this warning appears.  

2

3

NORA 270S USER MANUAL  

GENERALSPECIFICATIONS  

Warning: When the product is not used for a long period (more than 15  

days), remove the batteries. Otherwise, malfunctions that may occur  

would beoutof warranty.  

4

DIGITAL ROOM THERMOSTAT  

NORA 270S is a wired room thermostat. The user can adjust the room  

temperature with the required temperature and get more comfortable  

and economic heating/cooling.  

1

2

3

4

Room Temperature  

Set Temperature  

Economy Mode  

Comfort Mode  

Heating Indicator  

- If the Heating Indicator is blinking, the heating unit is  

working.  

- If the Heating Indicator is steady, the heating unit is not  

Pleasethrow yourdead batteriesinto the wastebin for batteries.  

ROOMTHERMOSTATWIRINGDIAGRAM  

 DifferentMode Options (Comfort Mode and Economy Mode)  

HEATING/COOLING UNIT  

 PreciseTemperatureMeasurement  

 Heating Calibration  

ON/OFFControl  

Wired Connection  

TPIAlgorithm  

NORA 270S  

USER MANUAL  

5

 Heating/Cooling Modes  

working.  

Cooling Indicator  

NORA270SANDEQUIPMENTS  

- If the Cooling Indicator is blinking, the cooling unit is  

working.  

- If the Cooling Indicator is steady, the cooling unit is not  

working.  

Battery Indicator  

NORA 270S Room Thermostat Alkaline Battery  

Dowels and  

Screws  

6

7

NO COM  

Warning!  

Operations within the heating  

ROOMTHERMOSTATPLACEMENT  

/

cooling unit or the electrical  

Room Thermostat needs to be placed in the room which is used most  

frequently. For instance; living room or lounge. Placing the Room  

Thermostat in a spot that have air circulation like entrance of a room  

or side of window should be avoided. Also anywhere close to  

heating/cooling units such as radiator, stove and spots which get  

direct sun lights would not be suitable. Room Thermostat needs to be  

located above the floor 150 cm height. Few trials may be made to find  

themost convenientspot.  

installation must be carriedout byprofessionally qualified persons.  

TECHNICALDATA  

ROOMTHERMOSTATTEMPERATURECALIBRATION  

Temperature sensors which are used in Room Thermostats are highly  

sensitive. You may need to calibrate your Room Thermostat if you  

would like to get the same temperature values with other  

thermometersin yourliving space.  

Dimensions  

Operating Current  

Relay NO Switching Current  

85mm / 125mm / 19.2mm  

3V DC (2 x AAA alkaline battery)  

2A/30VDC (Resistive load)  

0.5A/125VAC (Resistive load)  

0.1^oC  

Temperature Measurement  

Accuracy  

Operating Temperature Range  

Battery Life  

Operating Temperature  

Storage Temperature  

 While your device is turned off, press and hold the "On/Off"button  

for 3 seconds.  

(5^oC) – (30^oC)  

1 Year (2 x AAA)  

(-10^oC) – (+50^oC)  

(-20^oC) – (+60^oC)  

 Press the "On/Off" button until the “  

” menu appers. In order to  

see the desired temperature, set the temperature difference by  

press the “Temperature Adjustment Buttons”. This value can be  

arranged between “-8^oC" and “+8^oC".  

ROOMTHERMOSTAT  

ButtonsFunctions  

 To save the settings and exit, press the "On/Off" button until the  

deviceturns off.  

Note:Recommended tempreturecalibration is “0.0^oC”.  

FACTORY SETTINGS RESET  

1

2

You can reset your Room Thermostat to its default factory settings.  

This operation resets the mode temperature values, calibration  

setting and heating/coling modes to factory setting. To reset your  

Room Thermostatto factory setting:  

3

4

5

 While your device is turned off, press and hold the "On/Off"button  

for 3 seconds.  

6

 Pressthe “On/Off” button until “  

” menu appears.  

BATTERY PLACEMENT  

Before starting, power off the device connected to the Room  

Thermostatand makesure thatthe energy is cutoff.  

 While in the “ ” menu, select the “ ” option by using “+” or “-”  

buttons and press the“On/Off” button.  

1

2

3

4

5

6

Economy Mode  

 Your devicewillbe turned off and resetto factory settings.  

Temperature Adjustment (Increasing)  

Comfort Mode  

Heating/Cooling Modes  

Temperature Adjustment (Decreasing)  

ON/OFF and Setting Button  

MODESETTINGS  

There are 2 modes in the Room Thermostat. These are Comfort Mode  

“

” and Economy Mode “ ”. Modes work according to the pre-set  

temperaturevaluesadjusted byuser.  

In order to change thecomfort mode temperaturevalue;  

 Pressand hold thecomfort mode button for 3 seconds.  

 Change thetemperaturevaluebypressing “+” or “-“ buttons.  

 Press the comfort mode button once to save the changes you have  

made or wait10seconds.  

generallife.com.tr  

1

2

3

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GENERAL LIFE NORA 270S Digital Room Thermostat User Manual
Make	GENERAL LIFE
Language	English
Filetype	PDF (Download)
File size	2.13 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• GENERAL LIFE

GENERAL LIFE NORA 270S Digital Room Thermostat User Manual Overview

Summary of Contents

• Page 1: Low battery warning: When the icon appears on the screen, it means low battery warning. It is recommended to replace the batteries when this warning appears. Nora 270S is a wired room thermostat. The user can adjust the room temperature with the required temperature for more comfortable and economic heating/cooling. Room thermostat needs to be placed in the room which is used most frequently. Avoid placing it in spots with direct sunlight or near heating/cooling units. Temperature sensors in room thermostats are highly sensitive. Calibration may be needed to match temperature values with other thermometers. You can reset your room thermostat to its default factory settings. This operation resets mode temperature values, calibration settings, and heating/cooling modes. There are two modes in the room thermostat: Comfort Mode and Economy Mode. Modes work according to the pre-set temperature values adjusted by the user. To change the comfort mode temperature value, press and hold the comfort mode button for 3 seconds and adjust the temperature using the “+” or “-” buttons. Battery placement requires powering off the device connected to the room thermostat and ensuring the energy is cut off. Recommended temperature calibration is 0.0°C. Heating and cooling indicators show the operational status of the heating and cooling units.
• Page 2: Warranty conditions state that the warranty period starts from the invoice date and covers manufacturing defects for 5 years. Devices are delivered in working condition, and on-site commissioning is subject to a service fee. Repairs covered by the warranty are carried out at the company's factory, with transportation costs borne by the customer for on-site services. Maintenance of devices is also conducted by the company, with travel fares covered by the customer. The TPI Room Thermostat uses an algorithm to maintain the desired temperature with minimal fluctuations. If the thermostat is de-energized, the learning process restarts, which takes about 7 days. Malfunctions caused by customer misuse are not covered by the warranty. The warranty does not cover damages from external factors like fire or flood. The customer must report any product damages within the warranty period to retain their rights. The warranty document must be kept safe, as a lost document will not be replaced.