Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual
Did I buy the right thermostat?
The EasyTouch 355 model thermostats were designed to directly replace Coleman™, Airxcel™
and RVP™ ZC thermostats. Original thermostats must have model numbers of 9330-333, 9330-334,
9330-335, or 9430-334 to be replaced by this thermostat. If your thermostat is not listed, please contact
for your application.
Installing the thermostat
There are three steps to installing the thermostat. First remove your old thermostat. Next
disconnect and reconnect the wiring. Finally install the mounting pins to the wall and mount your new
thermostat. These steps are explained in detail in the following sections.
Removing the old thermostat
The original thermostat is held to the wall with a backing plate that extends about ¼” (6.3mm)
from the wall. The thermostat can be “popped off” the plate to access the mounting screws behind it.
Remove the screws and unplug the two connections on the cable harness. Note, some thermostats are
directly wired by the manufacturer. See the next section for further details before disconnecting the
wires.
4
©2023 Micro-Air LLC
June 13, 2023, revision 1.12
| General | Details |
|---|---|
| Name | Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual |
| Make | Micro-Air |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.33 MB |

micro-air EasyTouch 357 Multi Zone Replacement Thermostat Instruction Manual

Micro-Air EasyTouch RV 353 Touch Screen Thermostat Instruction Manual

Micro-Air 359 Touchscreen Thermostat Instruction Manual

Micro-Air EasyTouch RV 353 Thermostat Instruction Manual

micro-Air EasyTouch RV 351 Thermostat User Manual

Micro Air ETRV EasyTouch RV Thermostat Instruction Manual

micro-air EasyTouch RV 356 True Air RV Thermostat User Manual

micro-Air ASY-357-X02 EasyTouch 357 Touchscreen Thermostat User Manual

micro-Air EasyTouch 352 Thermostat User Manual

Micro-Air 351 Air Conditioner Digital Thermostat User Guide
































