Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual
Gas Heat Override
This feature turns on the gas furnace from an electric heat mode when the set point is five or
mode degrees away from the ambient temperature and heating is required. It is only available on
systems that have both gas and electric heating and is only active in electric heat or cool/electric heat
modes.
If heating set point is 5 degrees or more above the inside temperature in an electric heating
mode, the furnace will come on along with the electric heater. Both will remain on until the set point is
reached. If this action is necessary more than twice in a row, gas heat will be used for the next two
hours without electric heating. This is indicated by a red circle and line through the electric mode
button.
When the furnace is actively overriding the electric heat, a furnace symbol will appear at the top
of the thermostat screen.
Smart device application only features
Reset device
This Bluetooth only feature allows resetting the display just as if you removed and restored
power.
Calibrate Touchscreen
It is normally not necessary to recalibrate the touchscreen. This selection prompts the user to
press the four corners of the display then test the calibration using three diagonal marks. This feature is
only available from Bluetooth.
Check for updates
Check to see if any updates are available for the thermostat. The smart device application must
have internet and the thermostat must be connected to WIFI with a green WIFI symbol. Tap Check for
Updates and follow the prompts.
15
©2023 Micro-Air LLC
June 13, 2023, revision 1.12
Notifications
Notifications provide a way for the thermostat to communicate back to a smart device like a
tablet or phone. These notifications are indications of the temperature exceeding a set limit. Limits are
set by connecting to the thermostat in the app, selecting the settings gear, and then selecting
notifications. A minimum and maximum allowed temperature can be set. Table 4 shows an example of
operation with an 80°F maximum temperature set. Notification will be sent for each degree it rises
above the maximum temperature. If temperature drops, no notification will be sent unless the
temperature exceeds the last maximum temperature again (82 in the example). If the temperature
drops two degrees below the set maximum, (78 in the example) it will again alert for each degree above
the set maximum. This behavior helps avoid nuisance notifications to your smart device.
Table 4
Temperature °F
Action
80
81
Send first notification
Send another notification
Send another notification
Temperature drops, no
notification
82
81…79
78
Max temp resets
16
©2023 Micro-Air LLC
June 13, 2023, revision 1.12
| General | Details |
|---|---|
| Name | Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual |
| Make | Micro-Air |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.33 MB |

micro-air EasyTouch 357 Multi Zone Replacement Thermostat Instruction Manual

Micro-Air EasyTouch RV 353 Touch Screen Thermostat Instruction Manual

Micro-Air 359 Touchscreen Thermostat Instruction Manual

Micro-Air EasyTouch RV 353 Thermostat Instruction Manual

micro-Air EasyTouch RV 351 Thermostat User Manual

micro-air EasyTouch RV 356 True Air RV Thermostat User Manual

Micro Air ETRV EasyTouch RV Thermostat Instruction Manual

micro-Air ASY-357-X02 EasyTouch 357 Touchscreen Thermostat User Manual

micro-Air EasyTouch 352 Thermostat User Manual

Micro-Air 351 Air Conditioner Digital Thermostat User Guide
































