AIRZONE IBPRO6 FLEXA 3.0 Blueface Zero Wired Thermostat User Manual

Airzone IBPRO6 FLEXA 3.0 Blueface Zero Manual: Questions and Answers

Can the Airzone IBPRO6 FLEXA 3.0 Blueface Zero control both air and radiant heating in a single zone?

Yes. Control stages setting lets you select which heating option to use when your system controls both air and radiant in the zone. It's configured as combined by default. User Manual, p. 32

What does the window warning icon mean on the Airzone IBPRO6 FLEXA 3.0 Blueface Zero?

Air conditioning for that zone has been suspended because a window is open. Only appears if the window contact is activated on your system. User Manual, p. 33

How do you edit or delete a time schedule on the Airzone IBPRO6 FLEXA 3.0 Blueface Zero?

Press and hold the schedule. A menu appears with Edit, Delete and Copy options. User Manual, p. 31

What does Anti-freezing mean on the Airzone IBPRO6 FLEXA 3.0 Blueface Zero display?

The system is preventing the room temperature from dropping below 12°C even though the zone is off. It won't activate in Stop mode. User Manual, p. 32

How do I change the set-point temperature on the Airzone IBPRO6?

Press the temperature display, then use the minus and plus icons to adjust it.

1. Press on the current temperature shown on the home screen.
2. Use the - icon to lower the set-point or the + icon to raise it.
3. Changes occur in 0.5°C increments. User Manual, p. 27

How do I set up the Airzone IBPRO6 to control multiple zones in my home?

Press the zone name on the home screen to access the zone list, then select individual zones to control their settings.

1. Press the current zone name displayed on the home screen.
2. View the list of all zones in your system.
3. Select any zone to switch it on or off, or adjust its parameters.
4. To apply changes across all zones, press the 'all zones' option instead. User Manual, p. 29

Why isn't my Airzone IBPRO6 FLEXA 3.0 Blueface Zero responding to heating or cooling commands?

Check that the zone is switched on and the operating mode is set correctly. Verify the set-point temperature is above room temperature for heating or below for cooling.

• Press the On/Off icon to confirm the zone is active.
• In settings menu, ensure mode is Heat (for heating demand) or Cool (for cooling demand), not Stop.
• For heating, set-point must exceed room temperature. For cooling, set-point must be lower than room temperature. User Manual, p. 37

How do I replace batteries in the Airzone IBPRO6 FLEXA 3.0 Blueface Zero thermostat?

Remove the thermostat from its support and replace the CR2450 battery. Use top-brand batteries to avoid reduced lifespan. User Manual, p. 41

When should I change the batteries in my thermostat?

Replace them when a battery alert appears on the display. The thermostat warns you before batteries die completely. User Manual, p. 41

More Airzone thermostat manuals

• Airzone AZX6AIQSNSB-AZX6AC1VALR Think Monochrome
• Airzone Blueface Zero