EUROTRONIC Sparmatic COMET Programmable Energy-Saving Radiator Thermostat User Manual

1

2

the highlighted point and then taking it out (2).  

Adaptation  

sparmatic  

MENU  

Initial installation: Select  

, choose  

, Press the  

(1)  

OK  

button  

until  

appears on the display so that SPAR-  

(2)  

COMET  

matic comet will be able to start its adaptation. The device  

will adapt itself to the stroke of your valve body. To do this the  

valve will now be opened and closed several times to store the  

end points. In some cases this process can take a few minu-  

tes. After successful adaptation it returns to normal mode.  

programmable  

energy-saving  

radiator thermostat  

Then insert the batteries as represented in the appliance.  

Do not use accumulators! Ensure that the polarity is  

correct!  

-

Should adaptation become necessary again, e.g. if your  

radiator does not cool down in the  

press in the menu the button  

again.  

-Position, please  

Attention: Never recharge batteries, danger of explosion! Do  

not short circuit batteries! Do not disassemble batteries! Take  

low batteries out of the device immediately. Keep batteries  

away from extreme warming – danger of leakage! Do not  

apply used and new batteries together.  

until adaptation starts  

User manual  

-

If the mistake  

is shown on the display place SPAR-  

matic comet onto the radiator valve and then take the  

batteries out for a short time in order to execute a reset.  

By the way…  

If needed, clean the battery and the contacts before using  

them. Keep the batteries away from children. When getting in  

touch with battery acid instantly irrigate the affected parts with  

clear water and call a doctor.  

Do you already know about PROGmatic programming sticks?  

You can programme SPARmatic comet by hand or you can  

use, for example, the comfortable PROGmatic-Bluetooth  

programming stick to copy your personally specified heating and  

economy times onto all your EUROtronic energy-saving radiator  

thermostats at your home which have a programming port in a  

matter of seconds. Detailed information and the *PROGmatic  

Programming sticks can be found on: www.eurotronic.org  

Basic operating modes  

MANU-Modus  

In the MANU-mode SPARmatic comet adjusts to the manually  

specifi ed temperature.  

AUTO-Modus  

Setting date and time  

After inserting the batteries for the first time the date will flash on  

the display. Now, date and time can be set.  

In the AUTO-mode SPARmatic comet changes between to tem-  

peratures according to the time programme that has been set:  

comfort temperature (factory preset 21°C)  

economy temperature (factory preset 16°C)  

The heating and economy times can be specifi ed via the  

adjustable time programme. It is possible to set 8 switch  

points (4 heating and 4 economy times) per day at the most.  

SPARmatic comet has the following factory preset:  

OK  

Set date with the selector wheel.  

Confirm with  

.

.

.

.

OK  

OK  

OK  

OK  

Set month with the selector wheel. Confirm with  

Set day with the selector wheel.  

Set hour with the selector wheel.  

Confirm with  

Confirm with  

Set minute with the selector wheel. Confirm with  

– That´s it.  

Please read the user manual before you place the thermostat.  

Keep the documents for later questions and provide them if  

you pass the thermostat on to other persons.  

On the display PREP will be shown. Now, the motor will  

completely move to the installation position in order to make the  

installation easier. As soon as SPARmatic comet is ready for  

Heating time:  

Scope of delivery  

Heating with comfort temperature  

(factory preset: 1st heating time at 07:00)  

Economy time:  

1 SPARmatic comet energy saving radiator thermostat  

1 User manual  

installation  

will be shown on the display.  

(

- any time selected in the menu). Now please do not  

1 Connector  

press any other buttons! Plug device for coupling ring.  

lowering to economy temperature  

(factory preset: 1st economy time at 22:00)  

3 Adapters (Danfoss RA, Danfoss RAV, Danfoss RAVL)  

see mounting.  

Application as directed  

You can also set date and time via the menu item  

later  

Setting heating and economy times  

By purchasing the SPARmatic comet energysaving radiator  

thermostat you own a programmable radiator thermostat  

which can be used for temperature regulations in enclosed  

rooms and therefore, it can contribute to the reduction of hea-  

ting energy. – Please use the thermostat only for this purpose.  

The EUROtronic programming port is intended ONLY for our  

EUROtronic programming stick. Never connect other devices  

with the programming port!  

on. But in case of that, SPARmatic comet does not move to  

the installation position.  

With SPARmatic comet it is possible to set 4 heating and 4  

economy times per day – one for each day or one for a block of  

several days. TAG1 to TAG7 represent the weekdays from Mon-  

day to Sunday. Additionally, the corresponding days are shown  

as abbreviation below the menu bar on the display.  

Block construction:  

-

In case of replacing batteries, the stored time  

programme will remain active. You should  

check the specified time to ensure that.  

Mounting  

T 1–5 = same programme from Monday to Friday  

T 1–6 = same programme from Monday to Saturday  

T 1–7 = same programme from Monday to Sunday  

SPARmatic comet can be quickly and easily mounted on all com-  

mon valves (see adapter table). It can be installed without grime  

and water spots because the heating circuit is not interrupted.  

Display and control elements  

-

For non-programmed days the factory preset  

remains active.  

1

2

3

Heating times  

Child lock active  

Battery low  

0

6

12  

18  

24  

So  

1

2

Mo  

Di  

Mi  

Do  

Fr  

Sa  

:

Setting of an individual programme:  

4.a Travel function  

active  

3

4

5

6

AUTO  

MANU  

MENU  

Press  

Press  

. Select the menu item  

with the selector wheel.  

OK  

.

for Monday is shown on the display. Select  

4.b Comfort temperature  

active  

OK  

day/block with the selector wheel. Confirm with  

.

Set the beginning of the 1^st heating time (symbol  

)with the  

4.c Economy temperature  

active  

1.  

2.  

Turn the manual thermostat head up completely, loosen  

the fastening and pull the thermostat off of the valve.  

Use an appropriate adapter, if required, and push it onto  

the valve.  

selector wheel. Confirm with  

. Set the beginning of the 1^st  

7

COMET  

OK  

economy time (symbol ) with the selector wheel. Confirm with  

4.d Window/freeze protection  

function active  

. Now, if desired, a 2^nd, 3^rd or 4^th heating/economy time can  

OK  

be entered.  

5

AUTO or MANU mode active  

3.  

4.  

Screw the connector on the valve or the adapter.  

Now, you put SPARmatic comet on the connector until it  

noticeably clicks into place.  

-

If you do not want to set a further heating/economy time  

MENU  

6.a Button  

– leads to the main menu (starting from  

OK  

confirm „  

“ with  

.

regular display); within the menu one keypress leads  

The next day for programming is shown on the display.  

If you do not want to enter a further day, leave the menu  

MENU  

to the previous level  

-

OK  

6.b Button  

6.c Button  

– confirmation of setting  

– timer function  

with  

. If the temperature is shown on the display the  

Additional information about the different adapters  

are at: www.eurotronic.org  

programming is fi nished. Within the blocks you can also  

overwrite single days with differing times.  

7

Selector wheel  

Set up menu  

ATTENTION: It must be possible to insert SPARmatic comet  

Setting comfort and economy temperature  

MENU  

By pressing  

you will arrive at the set up menu. Please  

without applying force, ensure that the appliance is in the  

MENU  

Press  

. Select the menu item  

with the  

OK  

choose one of the items with the selector wheel. With  

or  

position.  

OK  

selector wheel. Confirm with  

. Set comfort  

you can select one menu item and with the selection wheel  

temperature with the selector wheel. Confi rm  

OK  

they can be adjusted. The button  

confirms the setting.  

-

In case of a later installation, please switch in the menu  

to and wait until the display shows  

before you install the device. Herewith the  

OK  

with  

. Set the economy temperature with the  

MENU  

The button  

leads to the previous level.  

OK  

selector wheel. Confirm with  

.

Area  

Area  

:

8°C, freeze protection function is active  

valve is completely open  

to select the mode  

installation is facilitated. Only mount it in this position.  

:

AUTO = automatic mode  

MANU = manual mode  

setting of time programme  

Dismounting  

-

By the way: Maximum energy saving can be  

obtained with an economy temperature which  

is about 5 °C below the comfort temperature.  

setting of comfort and economy temperature  

setting of date and time  

Manual operation  

window function  

With the selector wheel an adaptation of the room tempe-  

rature is possible at any time. In the AUTOmode it remains  

active until the next switch point is reached. Now, the usual  

programme becomes active again.  

reset of the device to factory preset  

starting of a new adaptation to adjust the valve  

travel function  

-

To remove SPARmatic comet remove this at the  

installation function  

(with the wheel turn on the highest temperature of over  

adaptation of temperature to the room situation  

28 C° to  

position), wait for a short period and unscrew  

standby function  

version  

the cap nut and remove the SPARmatic comet from  

the valve.  

Daylight saving time  

Inserting / replacing batteries  

Remove the battery lid by pressing the battery lid upwards (1) at  

www.eurotronic.org  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	EUROTRONIC Sparmatic COMET Programmable Energy-Saving Radiator Thermostat User Manual
Make	EUROTRONIC
Language	English
Filetype	PDF (Download)
File size	0.37 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• EUROTRONIC

EUROTRONIC Sparmatic COMET Programmable Energy-Saving Radiator Thermostat User Manual Overview

Summary of Contents

• Page 1: Adaptation process allows the device to adjust to the valve body stroke. Batteries should be inserted correctly, and accumulators must not be used. Never recharge batteries due to explosion risk, and keep them away from extreme heat. The SPARmatic comet can be programmed manually or with a PROGmatic programming stick. In MANU mode, the thermostat adjusts to a manually specified temperature. AUTO mode switches between comfort and economy temperatures based on a set time program. The device allows for setting up to 8 switch points per day for heating and economy times. The SPARmatic comet can be easily mounted on common valves without interrupting the heating circuit. The setup menu allows for adjusting comfort and economy temperatures. Maximum energy savings can be achieved with an economy temperature about 5 °C below the comfort temperature.
• Page 2: prevents the radiators from freezing. environment protection Electrical and electronic devices as well as batteries must not be disposed with household waste. The customer is legally obliged to return electrical and electronic equipment and batteries at the end of their service life. calcification protection function The timer function is selected with the timer-button. To clean the SPARmatic comet use only a dry or lightly wet cloth. The three-year warranty begins on the day of purchase. You can lock SPARmatic comet to protect the device from unauthorized activation. SPARmatic comet switches automatically from summer to winter time. Freeze protection function: If the temperature drops below 6°C, SPARmatic comet opens the valve until the temperature again rises above 8°C.