Honeywell TH6320U2008 Pro Programmable Thermostat Installation Guide

1

2

CAUTION: ELECTRICAL HAZARD  

Can cause electrical shock or equipment damage.  

Disconnect power before beginning installation.  

205 Heating Equipment Type  

Conventional Forced Air Heat:  

1 = Standard Efficiency Gas Forced Air  

2 = High Efficiency Gas Forced Air  

3 = Oil Forced Air  

Configurer le Thermostat  

Les paramètres d'installation ci-dessous fournissent  

des informations de configuration clés pour terminer  

la configuration du thermostat T6 Pro.  

4 = Electric Forced Air  

CAUTION: EQUIPMENT DAMAGE HAZARD  

Compressor protection is bypassed during testing. To prevent  

equipment damage, avoid cycling the compressor quickly  

T6 Pro Programmable Thermostat  

TH6320U2008, TH6220U2000, TH6210U2001  

5 = Hot Water Fan Coil  

Heat pump:  

7 = Air to Air Heat Pump  

8 = Geothermal Heat Pump  

Pour accéder au menu ISU :  

Appuyer sur Menu et sur les boutons  

pendant 3 secondes environ pour accéder  

au menu des réglages avancés.  

1.  

CAUTION: MERCURY NOTICE  

EN Installer Guide  

If this product is replacing a control that contains mercury in a  

sealed tube, do not place the old control in the trash. Contact your  

local wast management authority for instructions regarding  

recycling and proper disposal.  

Radiant Heat:  

9 = Hot Water Radiant Heat  

12 = Steam  

2. Appuyer sur Select (Sélectionner) pour  

accéder à ISU (Configuration de  

l’installateur).  

O = O (O/0B in Cool)  

1 = B (O/0B in Heat)  

218 Reversing Valve O/B  

Scan for the full Installer Manual  

1

3. Appuyer sur Select (Sélectionner) pour faire  

CAUTION: ELECTRONIC WASTE NOTICE  

défiler les options de configuration du menu.  

The product and batteries should not be disposed of with other  

household waste. Check for the nearest authorized collection center  

or authorized recyclers. The correct disposal of end-of-life equipment  

will help prevent negative consequences for the environment and  

human health.  

0, 1, 2  

220 Cool Stages / Compressor  

Stages  

4.  

Pour terminer le processus de configuration et  

enregistrer vos réglages, appuyez sur Home  

(Accueil).  

Notes: Only 1 compressor stage  

available on TH6210U model.  

Only 1 compressor stage available  

on TH6220U model if configured  

for heat pump.  

200-Conv / 200 - HP  

N° ISU Nom ISU  

ISU Options (réglage d’usine en gras)  

FCC statement available at:  

https://customer.resideo.com/en-US/support/residential/  

codes-and-standards/FCC15105/Pages/default.aspx  

120 Options de programmation 0 = Non-programmable  

2= 5-2 programmable  

221 Heat Stages / Backup  

Heat Stages  

Heat Stages: 1, 2  

Backup Heat Stages: 0, 1  

3= 5-1-1 programmable  

4=7-jours Programmable  

resideo.pro/T6Pro-EN  

230 Fan Control in Heat  

1 = Equipment Controls fan  

125 Échelle d’indication de  

température  

0 = Fahrenheit  

1 = Celsius  

2 = Thermostat Controls fan  

NOTE: For Heat Pump systems do NOT attach a wire  

to the W terminal of the UWP™ Mounting System.  

130 Capteur d’extérieur  

(TH6320U / TH6220U  

uniquement)  

Customer Assistance  

0 = Aucun  

1 = Capteur extérieur câblé  

3

253 Aux / E terminal control  

(fixed to “0” setting on all  

modals except TH6220U  

only  

0 = Drive both Aux & E together  

1 = Aux and E independent  

For assistance with this product, please visit  

customer.resideo.com  

200 Type de système de  

chauffage  

1 = Chauffage à air pulsé  

conventionnel  

2 = Thermopompe  

3 = Chauffage rayonnant  

5 = Aucun (refroidissement  

uniquement)  

Or call Resideo Customer Care toll-free at  

1-800-468-1502  

255 Backup Heat Source  

(Heat Pump Only)  

1 = Electric Forced Air  

2 = Gas/Oil Forced Air (or Fossil  

Forced Air)  

Configure the Thermostat  

The settings below provide key configuration  

information to complete the setup of the T6 Pro.  

2

(TH6320U / TH6220U only)  

To access the ISU menu:  

256 Emergency Heat Source  

(TH6320U only)  

1 = Electric Forced Air  

2 = Gas/Oil Forced Air (or Fossil  

Forced Air)  

205 Type d’équipement de  

chauffage  

Chauffage à air pulsé conventionnel :  

1 = Air pulsé à gaz efficacité standard  

2 = Air pulsé à gaz haute efficacité  

3 = Air pulsé au mazout  

1. Press and hold Menu and  

buttons for 3 seconds to enter  

advanced menu.  

4 = Air pulsé électrique  

260  

0 = Thermostat Controls Backup  

Heat  

1 = External Fossil Fuel Kit Controls  

Backup Heat  

External Fossil Fuel Kit  

T6 Pro Thermostat Programmable  

5 = Ventiloconvecteur à eau chaude  

2.  

Press Select to enter ISU.  

(TH6320U / TH6220U only)  

TH6320U2008, TH6220U2000, TH6210U2001  

Thermopompe :  

7 = Thermopompe air-air  

8 = Thermopompe géothermique  

3.  

Press Select to cycle through  

menu setup options.  

300 System Changeover  

0 = Manual  

1 = Automatic  

FR Guide d’installation  

4.  

To finish setup process and save  

Chauffage rayonnant :  

9 = Chauffage rayonnant à eau  

chaude  

your setting, press Home.  

303 Auto Changeover  

Differential  

0°F to 5°F  

0.0°F to 2.5°F  

12 = Vape  

340 Backup Heat Droop  

0 = Comfort  

O = O (O/0B sur refroidissement  

)

Recherchez le manuel  

218 Robinet inverseur O/B  

#ISU ISU Name  

ISU Options (default in bold)  

Options for 2-15 # of degrees  

Fahrenheit  

1 = B (O/0B sur chauffage)  

1

d'installation complet  

120 Scheduling Options  

0 = Non-Programmable  

2= 5-2 Programmable  

3= 5-1-1 Programmable  

4=7-Day Programmable  

Remarque : Une seule phase de  

compresseur est disponible sur le  

modèle  

TH6210U. Une seule phase de  

compresseur est disponible sur le  

modèle.  

220 Étages de refroidissement /  

Étages  

350 Upstage for Backup Heat  

0 = 30 minutes 9 = 6 hours  

1 = 45 minutes 10 = 7 hours  

2 = 60 minutes 11 = 8 hours  

3 = 75 minutes 12 = 9 hours  

4 = 90 minutes 13 = 10 hours  

5 = 2 hours  

6 = 3 hours  

7 = 4 hours  

8 = 5 hours  

du compresseur 200=Conv /  

200=HP  

125 Temperature Indication  

Scale  

0 = Fahrenheit  

1 = Celsius  

14 = 12 hours  

15 = 14 hours  

16 = 16 hours  

TH6220U s’il est configuré pour  

une thermopompe.  

221 Étages de chauffage /  

Étages de chauffage de  

secours  

Étages de chauffage: 1, 2  

Étages de chauffage de secours:  

0, 1  

130 Outdoor Sensor  

0 = None  

(TH6320U / TH6220U only) 1 = Wired Outdoor Sensor  

355 Compressor Lockout /  

Balance Point  

(C7089U1006 wired  

- - = Off  

5°F to 60°F (in 5°F increments)  

-15 0°C to 15.5°C (in 2.5° or 3.0°  

increments)  

200 Heating System Type 1 = Conventional Forced Air Heat  

230 Réglage du ventilateur  

pour le chauffage  

1 = L’équipement contrôle le  

ventilateur  

2 = Le thermostat contrôle le  

ventilateur  

2 = Heat pump  

3 = Radiant Heat  

5 = None (Cool Only)  

outdoor sensor needed)  

Note: Use a wired sensor to set  

compressor lockout / balance point  

on TH6320U / TH6220U  

resideo.pro/T6Pro-FR  

253 Réglage de borne Aux/E  

(Réglé à « 0 » sur tous les  

modèles, sauf TH6320U)  

0 = Commande Aux et E ensemble  

1 = Aux et E indépendants  

- - = Off  

356 Outdoor Lockout  

Backup Heat  

(C7089U1006 wired  

5°F to 60°F (in 5°F increments)  

-15 0°C to 15.5°C (in 2.5° or 3.0°  

increments)  

255 Source de chauffage de  

secours (thermopompe  

1 = Air pulsé électrique  

2 = Air pulsé au gaz/mazout (ou  

combustible fossile)  

outdoor sensor needed)  

REMARQUE : pour les systèmes de pompe à chaleur,  

ne fixez PAS de fil à la borne W du système de  

montage UWP™.  

0 = Off  

1 - 5 minutes  

387 Compressor Protection  

uniquement) (TH6320U /  

TH6220U uniquement)  

33-00669EFS-01  

CONTINUER  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Honeywell TH6320U2008 Pro Programmable Thermostat Installation Guide
Make	Honeywell
Language	English
Filetype	PDF (Download)
File size	0.15 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Honeywell

Honeywell TH6320U2008 Pro Programmable Thermostat Installation Guide Overview

Summary of Contents

• Page 1: CAUTION: Electrical hazard can cause electrical shock or equipment damage. Disconnect power before beginning installation. The settings below provide key configuration information to complete the setup of the T6 Pro. Compressor protection is bypassed during testing. To prevent equipment damage, avoid cycling the compressor quickly. If this product is replacing a control that contains mercury in a sealed tube, do not place the old control in the trash. The product and batteries should not be disposed of with other household waste. Check for the nearest authorized collection center or authorized recyclers. To access the ISU menu: Press and hold Menu and buttons for 3 seconds to enter advanced menu. To finish setup process and save your setting, press Home. Note: Only 1 compressor stage available on TH6210U model. For Heat Pump systems do NOT attach a wire to the W terminal of the UWP Mounting System.
• Page 2: Precaución: peligro de electrocución. Desconecte el suministro eléctrico antes de comenzar la instalación. Calefacción de aire forzado convencional. Precaución: riesgos de daños al equipo. Evite encender y apagar rápidamente el compresor. Precaución: aviso sobre el mercurio. No coloque equipos que contienen mercurio en la basura. El producto y las baterías no deben desecharse junto con otros residuos domésticos. Para acceder al menú ISU, presione y sostenga el botón Menú. Los ajustes proporcionan información de configuración clave para completar la configuración del termostato T6 Pro.