mars 7602-457 Communicating Programmable Thermostat Instruction Manual
Installation Manual - 7602-457 Communicating, Programmable Thermostat
Adjust the Humidifier Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
3.6.2
MULTI-UNIT OPTION SELECTION
In section 3.2, when an installer selects “Option Selection”
from the System Configuration menu, the installer may
choose the unit to configure by the last 4 digits of its serial
number from the following screen.
•
•
Cumulative Run Time (default Off) – valid range:
Off, 400 to 3600 hours (in 100 hour increments)
Calendar Time (default Off) – valid range: Off, 3
to 24 months (in 3 month increments)
OPTION SELECTION
4.3
UV LAMP
TT026
TT026
TT038
S N - - - - - 1 2 3 4
S N - - - - - 5 6 7 8
S N - - - - - 9 0 1 2
This feature displays an alert to remind the user to change
the UV lamps after the selected time has passed.
Adjust the UV Lamp Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
•
Cumulative Run Time (default Off) – valid range:
Off, 400 to 3600 hours (in 100 hour increments)
Calendar Time (default Off) – valid range: Off, 3
to 48 months (in 3 month increments)
•
PREVIOUS
SELECT
4.4
AIR CLEANER
3.6.3
Multi-Unit, Unit, Pump, & Valve Configuration
This feature displays an alert to remind the user to clean the
filter(s) after the selected time has passed.
To configure Unit, Pump, and Valve options in sections 3.3-
3.5, the thermostat must be connected to only one unit at a
time.
Adjust the Air Cleaner Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
4.0 Accessory Configuration
•
Cumulative Run Time (default Off) – valid range:
Off, 400 to 3600 hours (in 100 hour increments)
Calendar Time (default Off) – valid range: Off, 3
to 24 months (in 3 month increments)
A service message will flash at the top of the Main screen
when a service timer expires to alert the user that it is time to
service these options. Refer to DXM2 AOM for instructions on
configuring DIP switches to configure accessories. Follow the
instructions below to set service timers.
•
5.0 Input Dealer Information
INSTALLER SETTINGS
THERMOSTAT CONFIG
SYSTEM CONFIG
Enter/edit the Dealer Information settings, including Brand
Name, Model Number, Serial Number, Contractor Name, and
Contractor Phone number, using the up/down arrow buttons.
Press the center button to save changes.
ACCESSORY CONFIG
INPUT DEALER INFO
HUMIDITY CONFIG
TEMPERATURE CONTROL
DEMAND REDUCTION CNFG
SERVICE MODE
BRAND NAME
SETPOINT LIMITS
CLIMATEMASTER
RESTORE DEFAULTS
MODEL NUMBER
DXM2
3.3
C 1.0
TTV038AGD01ALKS
7602-457
SELECT OPTION
PREVIOUS
SERIAL NUMBER
1234567890
CONTRACTOR NAME
MR GEOTHERMAL
4.1
AIR FILTER
This feature displays an alert to remind the user to change
the air filter after the selected time has passed.
CONTRACTOR PHONE
555-1234
PREVIOUS
SAVE
Adjust the Air Filter Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
•
Cumulative Run Time (default Off) – valid range:
Off, 400 to 3600 hours (in 100 hour increments)
Calendar Time (default Off) – valid range: Off, 3
to 48 months (in 3 month increments)
•
4.2
HUMIDIFIER
This feature displays an alert to remind the user to change
the humidifier pad after the selected time has passed.
10
| General | Details |
|---|---|
| Name | mars 7602-457 Communicating Programmable Thermostat Instruction Manual |
| Make | MARS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.49 MB |




























