mars 7602-457 Communicating Programmable Thermostat Instruction Manual
Installation Manual - 7602-457 Communicating, Programmable Thermostat
3.1
AIRFLOW SELECTION
3.0 System Configuration
Adjust the airflow settings for each system operating mode
using the up/down arrow buttons. Press the center button to
select each item.
Use the System Configuration option on the start-up screen
to adjust critical equipment settings.
•
Airflow Settings (defaults stored in control)
- valid range: obtained from control (in 25 CFM
increments)
The System Configuration information will be automatically
obtained from each communicating control in the system.
•
Blower Off Delay (default 60 seconds) – valid
range: 0 to 255 seconds (in 5 second increments)
Note 1: The Airflow Selection menu (section 3.1) will not be
present if the connected communicating control system has
no blower.
NOTE 1: The Airflow Settings will only be present if the
connected communicating control is configured for ECM
blower.
Note 2: The Pump Configuration menu (section 3.4) will
not be present if the connected communicating control is
configured for No Loop Configuration (OTHER).
NOTE 2: If multiple units are connected to one thermostat,
refer to section 3.6 for unit selection.
Note 3: The Valve Configuration menu (section 3.5) will
not be present if the connected communicating control is
configured for No Loop Configuration (OTHER).
AIRFLOW SELECTION
CFM
HEAT STAGE 1
600
750
850
850
525
700
425
550
350
60
HEAT STAGE 2
AUXILIARY HEAT
EMERGENCY HEAT
COOL STAGE 1
INSTALLER SETTINGS
THERMOSTAT CONFIG
SYSTEM CONFIG
COOL STAGE 2
ACCESSORY CONFIG
INPUT DEALER INFO
HUMIDITY CONFIG
COOL DEHUMID 1
COOL DEHUMID 2
CONTINUOUS FAN
HEAT OFF DELAY
COOL OFF DELAY
TEMPERATURE CONTROL
DEMAND REDUCTION CNFG
SERVICE MODE
30
SETPOINT LIMITS
PREVIOUS
NEXT
RESTORE DEFAULTS
DXM2
3.3
3.2
OPTION SELECTION
C 1.0
7602-457
This option allows the configuration of heat pump options to
be modified.
SELECT OPTION
PREVIOUS
Adjust the Option settings using the up/down arrow buttons.
Press the center button to select each item.
SYSTEM CONFIGURATION
AIRFLOW SELECTION
OPTION SELECTION
UNIT CONFIG
•
Motorized Valve (defaults stored in control) –
valid range: Off, On “On” delays compressor start
until the valve is fully open.
TE026
NOTE: “Motorized Valve” used here refers to a two-position
motorized water valve, not to be confused with the modulating
motorized water valve found in the LOOP CONFIG.
PUMP CONFIGURATION
•
Compressor ASCD (Anti-Short Cycle Delay
(default stored in control) – valid range: 5 to 8
(in 1 minute increments)
SELECT OPTION
PREVIOUS
SAVE
NOTE 1: The Compressor Anti-Short Cycle Delay setting
provides equipment protection by forcing the compressor to
wait a few minutes before restarting.
NOTE 2: If multiple units are connected to one thermostat,
refer to section 3.6 for unit selection.
7
| General | Details |
|---|---|
| Name | mars 7602-457 Communicating Programmable Thermostat Instruction Manual |
| Make | MARS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.49 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Moes WHT-PJ01 Smart WiFi Thermostat User Manual
SALUS CONTROLS RT520 Thermostat User Manual
Honeywell DT4 Room Thermostat User Manual
sinope TH1500ZB Smart Double Pole Thermostat Installation Guide
BEOK CONTROLS TDR83 WiFi Heating Thermostat User Guide
PNI-CT40 Smart Wireless Thermostat User Manual
GEYER GS-THWF Wifi Water Heating Thermostat Owner’s Manual
PRO T751 Thermostat Installation Guide
Honeywell TH8321U Touch Screen Programmable Thermostat Installation Guide
LuxPro T10-1141 Heat Thermostat Instruction Manual