Braeburn 8205 Universal Smart Wi-Fi Thermostat User Guide

1

2

Wi-Fi Setup Guide  

®

Model 8205  

Universal Smart Wi-Fi  

Thermostat  

Leave this Setup Guide  

with thermostat.  

8205-105-02  

Wire and Install Thermostat  

1

• Properly wire and configure thermostat.  

Refer to the Installer Guide.  

• Refer to the User Manual for programming  

and maintenance.  

NOTE: Requires common (C) wire on Heat  

Pump, Heat Only or Cool Only Systems  

Helpful videos can be found at  

www.braeburnonline.com and in the  

BlueLink Smart Connect^® App.  

Set-Up for Connection  

2

Before beginning setup you will need to:  

®

• Know your Wi-Fi network name and password  

• Have a valid e-mail address  

• Locate your thermostat serial number  

• Get the FREE app for iOS or Android^TM  

NOTE: The initial thermostat connection must  

be performed from an Apple iOS or Android^TM  

mobile device or tablet. Once connected, you can  

access the app on a desktop PC by visiting  

bluelinksmartconnect.com/bluelink.  

Serial number  

location  

Login and Register  

3

3.1 Open the BlueLink Smart Connect  

App. Select REGISTER and enter  

a valid e-mail address.  

3.2 Enter the thermostat serial number.  

You can locate this number on the  

back of the thermostat.  

NOTE: If you removed the thermostat to  

locate the serial number, make sure to  

reconnect it before selecting ENTER.  

3.3 Complete the remaining registration  

screens. The application will walk  

you through the Wi-Fi connection  

process.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Braeburn 8205 Universal Smart Wi-Fi Thermostat User Guide
Make	Braeburn
Language	English
Filetype	PDF (Download)
File size	0.15 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL THERMOSTAT INSTRUCTIONS & USER MANUALS
• Braeburn

Braeburn 8205 Universal Smart Wi-Fi Thermostat User Guide Overview

Summary of Contents

• Page 1: Wi-Fi Setup Guide Model 8205 Universal Smart Wi-Fi Thermostat Wire and install thermostat Properly wire and configure thermostat. Refer to the Installer Guide. Refer to the User Manual for programming and maintenance. Requires common (C) wire on Heat Pump, Heat Only or Cool Only Systems. Set-Up for connection Know your Wi-Fi network name and password. Have a valid e-mail address. Locate your thermostat serial number. Get the free app for iOS or Android. The initial thermostat connection must be performed from an Apple iOS or Android mobile device or tablet. Open the BlueLink Smart Connect App. Select REGISTER and enter a valid e-mail address.
• Page 2: Use the Wi-Fi menu to connect your thermostat to Wi-Fi, review connection information, and clear Wi-Fi connection when necessary. To enter the Wi-Fi menu, press and release the MENU button, select WIFI SET, and press NEXT to confirm. The thermostat is ready to connect to a Wi-Fi network. Use the BlueLink Smart Connect application to complete the connection process. Select to clear the saved Wi-Fi network information and prepare the thermostat for a new Wi-Fi connection. Ensure that the thermostat is snapped securely onto the sub-base, and check power to the heating and cooling equipment if there is a no power warning. The following error messages may be encountered when connecting to Wi-Fi: NO POWER and CONNECT FAIL. Make sure you are entering the correct network name and password during the connection process. The thermostat is not compatible with 5GHz networks; ensure you are connecting to a 2.4GHz Wi-Fi network. To clear the thermostat’s Wi-Fi connection, use option 3 of the Wi-Fi setup menu and reboot the thermostat. Restore power to the thermostat and snap it onto the sub-base to connect to a new Wi-Fi network.