Braeburn 8205 Universal Smart Wi-Fi Thermostat User Guide
Use the Wi-Fi Menu to connect your thermostat to Wi-Fi,
review connection information, and to clear Wi-Fi connection
when necessary.
4
To Enter the Wi-Fi Menu
1
2
3
4
5
Press and release the MENU button
Use the or buttons to select WIFI SET
Press NEXT (HOLD) to confirm this choice and enter the Wi-Fi Menu
Press NEXT (HOLD) or BACK (PROG) to move to the next or previous setting
Press RETURN (FAN) to exit or wait 30 seconds
No. Option
Wi-Fi Pairing Mode
Displayed Default Available Description
-
-
1
CONNECT
WIFI
-
[Only appears if the thermostat does not have saved Wi-Fi network information] The thermostat is ready
to connect to a Wi-Fi network. Use the BlueLink Smart Connect application to complete the connection process.
No. Option
Wi-Fi SSID
Displayed Default Available Description
-
-
2
[SSID]
WIFI
Only appears if the thermostat has saved Wi-Fi network information] This option does not perform any
-
[
function, but allows the user to review the saved Wi-Fi network.
NO
Select if you do not want to clear the
saved Wi-Fi network information
3
Wi-Fi Clear
CLEAR
NO
Y
Select to clear the saved Wi-Fi network
information and prepare the thermostat
for a new Wi-Fi connection
[Only appears if the thermostat has saved Wi-Fi network information] This option can be used to clear the
saved Wi-Fi network to prepare the thermostat for a new network.
4
No Power Warning
NO POWER
WIFI
-
-
-
[This message appears if the thermostat does not have sufficient power to operate the Wi-Fi] Ensure that
the thermostat is snapped securely onto the sub-base, and try again. If this message persists, check power to the
heating and cooling equipment. If your thermostat is not equipped with a common “C” wire, you may need
to provide this connection in order to remove this message.
Troubleshooting Wi-Fi Connection Issues
The following error messages may be encountered when connecting to Wi-Fi.
NO POWER Indicates the thermostat does not have sufficient power to operate Wi-Fi.
Make sure the thermostat is snapped securely on the sub-base. Check the power to the
heating and cooling equipment, and try again. If the issue persists and your thermostat is
not equipped with a common “C” wire, you may need to provide this connection to remove
the message and connect to Wi-Fi.
CONNECT FAIL Indicates the thermostat was unsuccessful in its attempt to connect to the
Wi-Fi network. This could be due to a variety of factors, but check the following and try again:
• Ensure you are entering the correct network name and password during the connection
process. If using a network with no password, enter a space in the password field.
• Make sure you are connecting to a 2.4GHz Wi-Fi network. The thermostat is not compatible
with 5GHz networks.
• Try disabling MAC address filtering, firewalls, and any additional advanced security on your
router during the connection process. Once you have finished the connection, you can
typically re-enable these advanced security settings.
• Confirm that you have internet access on other devices connected to the Wi-Fi network
you are trying to use.
Clearing Wi-Fi Connection or Changing Network
To clear the thermostat’s Wi-Fi connection and prepare for a new Wi-Fi connection, perform the following steps:
1 Use option 3 of the Wi-Fi setup menu to clear the currently saved network.
2 Reboot the thermostat by removing it from the wall, removing the batteries and letting the thermostat sit until
it powers down completely.
3 Restore power to the thermostat and snap it onto the sub-base. The thermostat can now be connected to a
new Wi-Fi network, if desired.
®
Braeburn Systems LLC
2215 Cornell Avenue • Montgomery, IL 60538
Apple and the Apple logo are trademarks of Apple Inc.,
844-BLU-LINK (844-258-5465) (U.S.)
registered in the U.S. and other countries. App Store
630-844-1968 (Outside the U.S.)
is a service mark of Apple Inc. Google and Google Play
©2024 Braeburn Systems LLC • All Rights Reserved.
are trademarks of Google LLC.
8205-105-02
| General | Details |
|---|---|
| Name | Braeburn 8205 Universal Smart Wi-Fi Thermostat User Guide |
| Make | Braeburn |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.15 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Braeburn Programmable Touchscreen Thermostat User Manual
Braeburn TH-BR22 Programmable Thermostat Instructions
Braeburn 8205-100-02 Universal Smart Wi-Fi Thermostat Instruction Manual
Braeburn 2030 Economy Model Thermostat User Manual
Braeburn 2030 Programmable Thermostat Instruction Manual
HAVACO HTS Electronic Room Thermostat User Manual
SALUS FC600 Fan Coil Thermostat User Guide
GENERAL LIFE FH100S Underfloor Heating Thermostat User Manual
Honeywell DT4 Room Thermostat User Manual
HERSCHEL MD2 Wi-fi Enabled Wired Thermostat Instruction Manual
SALUS CONTROLS IT800WIFI Smart Thermostat Installation Guide
Netmostat N-1 Smart Wifi Programmable Thermostat User Manual
GENERAL LIFE SOLARA 300S Digital Room Thermostat User Manual
tuya M3 Series Thermostat User Guide
SALUS BTR230 Room Thermostat User Guide