marmony MTC-40 Radio Controlled Room Thermostat Instruction Manual
SETTINGS
DATE, TIME, CONSTANTS
After inserting the batteries, the thermostat is in OFF mode.
- Switch on the display lighting (short press on any button).
- Press the SET / OK button for 3 seconds.
The year (Y) starts to flash. Use the “+” or “-” button to
adjust the value. Press the “SET / OK button” to confirm.
The month (M) starts to flash. Use the “+” or “-” button to
adjust the value. Press the “SET / OK button” to confirm.
The day (D) starts to flash. Use the “+” or “-” button to
adjust the value. Press the “SET / OK button” to confirm.
The hour starts to flash. Use the “+” or “-” button to
adjust the value. Press the “SET / OK button” to confirm.
The minute starts to flash. Use the “+” or “-” button to adjust the
value. Press the “SET / OK button” to confirm and 1.0 °C flashes in the
programme row and CONST. is illuminated. The date and time setting
process is now complete! Additional entries for the CONSTANTS are not
necessary! Now wait 15 seconds until the display lighting switches off.
The data is saved automatically and the previous menu is displayed!
Additional entries for the CONTANTS are already optimised as
factoring settings for your marmony infrared heating systems
and should not be changed!
After the date and time have been entered, the CONSTANTS are
displayed and “CONST.” is illuminated in the programme bar. Change
hysteresis: On the display at the top left, the pre-set hysteresis value of
1.0 °C flashes. This pre-set value should not be changed. Confirm value
by pressing the “SET / OK button”.
Note: When the “TARGET” temperature is reached, the thermostat switches the
heater off and switches it back on again when the room temperature falls below
the set hysteresis value (error variable). The hysteresis value can be changed with
plus / minus from 1 °C to 5 °C.
Example: If the TARGET temperature is 20 °C and the hysteresis is 1 °C, the
thermostat switches the heater off at 20 °C and switches it back on again in the
event of a temperature drop to 19 °C. Recommended setting for marmony infrared
heaters: “1.0 °C”
| General | Details |
|---|---|
| Name | marmony MTC-40 Radio Controlled Room Thermostat Instruction Manual |
| Make | marmony |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.51 MB |
(1 votes, average: 5.00 out of 5)
Loading...
WHITE-RODGERS 1F86-444 Non Programmable Electronic Digital Thermostat Instruction Manual
GENERAL Life MITRA 220 Wired Room Thermostat User Guide
MI-HEAT WT8 WiFi Smart Thermostat User Manual
emos P5604 Thermostat Instruction Manual
EMERSON 1F75P-21PR Display Thermostat Instruction Manual
Danfoss 014G0013 Z Wave Radiator Thermostat Installation Guide
MClimate MC-LW-FCT-01 LoRaWAN Fan Coil Thermostat User Manual
Micro-Air EasyTouch 355 Touch Screen Thermostat User Manual
Honeywell RTH9600WF Touchscreen Programmable Thermostat User Guide
BOSCH 6721807275 Smart Radiator Thermostat Installation Guide