Home > marmony > marmony MTC-40 Radio Controlled Room Thermostat Instruction Manual

marmony MTC-40 Radio Controlled Room Thermostat Instruction Manual

MISCELLANEOUS  
Frost protection:  
Should the room temperature fall below 3 °C in “OFF mode”, the frost  
protection is automatically activated (the frost symbol is illuminated in  
the symbol row). The thermostat switches to heating mode. If the room  
temperature rises to +12 °C, the heating mode is deactivated again and  
the thermostat switches back into “OFF mode”.  
Note: If the thermostat is completely switched off (display off), the frost  
protection is not activated!  
TEST mode:  
- In “ON / OFF mode”, press the “+ / - button” until “TEST” appears in the  
programme row. Press the “START” button. On the display, ON / OFF is  
shown on an alternating basis. The receive switches on and off in sync  
(LED red/green flash in sync). By pressing the “ON / OFF button” on the  
thermostat, you can exit the functional test. (With the TEST mode, you  
have the option of testing the connection between the thermostat and  
the receiver).  
If the receiver does not respond to the signal from the thermostat,  
establish the connection manually (pairing). “See Installation of the  
receiver).  
Battery replacement:  
If the battery symbol lights up in the symbol row on the display, you  
should insert new batteries promptly (2 x AA / LR6)! Only use alkaline  
batteries. Do not use rechargeable batteries!  
Dispose of used batteries according to the local regulations!  
GeneralDetails
Namemarmony MTC-40 Radio Controlled Room Thermostat Instruction Manual
Makemarmony
LanguageEnglish
FiletypePDF (Download)
File size0.51 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

marmony MTC-40 Radio Controlled Room Thermostat Instruction Manual