HELTUN Fan Coil Thermostat HE-FT01 User Manual
To set up the start time for each Schedule, choose the Schedule by pressing the Clock “ ” button then adjust the time
by pressing the “SPEED” button to increase, or “MODE” button to decrease. Press the Clock “ ” button again to
advance to the next schedule and set the time for all four: Morning, Day, Evening & Night.
To choose the temperature Set Points for each Schedule, choose the day of the week by pressing the “Climate”
button (
), then choose the Schedule by pressing the Clock “ ” button and adjust the temperature Set Point up or
down by pressing the Plus “+” or Minus “–” buttons. Do this action for each day of the week.
Note: All four times (Morning, Day, Evening, & Night) are the same for all seven days of the week.
Note: TIME mode will only work properly if the correct current time and date have been set. The time can be
automatically corrected from your Z-Wave gateway if the Parameter 01 value is set to 1. Or it can be set manually in
Parameters 03, 04, and 05 in the Settings Menu (see below).
Note: When in TIME mode, the temperature Set Point (under the label on the LCD: SET TEMP) will be automatically
changed depending on the Schedule. At any time, the Set Point can be adjusted up or down manually but it will be in
effect only until the next Schedule.
Note: Under TIME mode, the Set Points for all climate modes are the same.
Note: In your Z-Wave gateway this mode will be shown as “Auto”. It is impossible to change the TIME Mode Set
Points through a Z-Wave gateway. If you change the Operating Mode to “Auto” through your Z-Wave gateway, the
Climate Mode, “Heating & Cooling,” will be selected on the HE-FT01 according to the value of Parameter 41
(1=”Heating & Cooling,” 2=”Heating,” & 3=”Cooling”).
ECO - Energy Saving Mode
This Mode can be used if lower temperatures and energy consumption is desired. It can also be used at night or when
away the property for a length of time. Under this Operating Mode there are two different Climate control modes:
“Heating” and “Cooling”. Each Climate Mode has its individual Set Point. Choose the desired climate mode and adjust
the temperature set point for each mode separately.
Note: In your Z-Wave gateway you will see two Set Points corresponding to different climate modes: “Energy Save
Heating” in the Z-Wave gateway corresponds to “Heating” climate mode in the HE-FT01, “Energy Save Cooling”
corresponds to “Cooling” the HE-FT01 climate mode.
Note: “Ventilation” Climate Mode will disable (Switch Off) all Operating Modes including ECO.
OFF – Operating modes disabled
In this operating mode only Ventilation climate mode can operate. If “Heating”, “Cooling” or “Heating & Cooling”
climate modes are selected the device goes to IDLE state.
Child Lock (LOC)
The Child Lock feature allows you to disable the HE-FT01 touch buttons temporarily. To activate the Child Lock Mode,
press and hold the “SPEED” button for five seconds until the Lock Icon ( ) appears in the bottom right corner of the
display. To deactivate the Child Lock, press the “SPEED” button until the Lock Icon ( ) disappears.
Factory Reset (RES)
By pressing and holding the “MODE” button for 6 seconds, the HE-FT01 will enter Factory Reset Mode, displaying
“REs” in the left bottom corner, “y” and “n” in the center. Press the Plus (+) button to revert to factory settings, or the
“SPEED” button to cancel. The factory reset will change all the Parameters to their original factory default values and
will also Exclude the device from any Z-Wave network.
Note: Please use Factory Reset only when the primary network controller is missing or otherwise inoperable.
Settings Menu
To enter the Settings Menu, press and hold the “Climate” button (
) for three seconds. The abbreviated
Parameter Name will be displayed in the top left corner of the LCD. The left center will display the Parameter
Number. And the bottom left corner will display the Parameter Value.
9
| General | Details |
|---|---|
| Name | HELTUN Fan Coil Thermostat HE-FT01 User Manual |
| Make | HELTUN |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.35 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HELTUN HE-HT01 Heating Thermostat User Guide
Honeywell Home RTH Series X2S Smart Thermostat Installation Guide
terneo BeeRT Digital Thermostat Instruction Manual
Roth VVS-nr. 466397.058 Softline Standard Room Thermostat Instruction Manual
Honeywell T8775 Digital Round Thermostat Instructions
sinope TH1500WF Smart Double Pole Thermostat Installation Guide
GENERAL LIFE MITRA 220 Digital Room Thermostat User Manual
Fantini Cosmi CH141E Battery Operated Weekly Programming Thermostat Owner’s Manual
beok BOT-323W Room Thermostat Instruction Manual
Network Thermostat X7-Series Thermostat Installation Guide
PRO1 R250W Wireless System Thermostat Owner’s Manual