EUROSTER 4040 Smart Programmable Thermostat User Manual
EUROSTER 4040 Smart – INSTALLATION AND OPERATION MANUAL 8
•
Air conditioning
Having selected air-conditioning mode the device connected to the thermostat will be switched
on when the temperature increases above the preset level.
In air-conditioning mode, the function of the thermostat power switch changes and the switch
is used to select between heating and cooling. Activating the air-conditioning operation enables
the preset ranges to be replaced with different ones – the ranges stored for cooling. Returning
to heating functions restores the previous ranges. This function enables the thermostat to
operate with air-conditioning and heating without losing the settings. The
switched-on device also changes.
icon of the
•
Selection of temperature sensor
This option permits the selection of a temperature sensor to cooperate with the thermostat.
There are three operation modes available:
✓ the thermostat measures and maintains the temperature based only on internal
sensor operation
✓ the thermostat measures and maintains the temperature based only on external
(cabled) sensor operation
✓ the thermostat measures the temperature of both sensors; it maintains the
temperature of an internal sensor, and the external sensor acts as a temperature
limit. Having selected this operation mode set the floor temperature limit value.
This parameter is used to establish the maximum safe floor temperature. When
the preset temperature is reached, the device gets switched off.
✓ Temperature sensor correction. It is used to adjust the read-out within the range
of +/- 5 °C. The function is convenient if the thermostat is located in a slightly
warmer or cooler area of the room. Press the central button to introduce a
change. Use
buttons to set the new value. Confirm with the central button.
CAUTION! The floor temperature sensor is not included in the basic kit. Please order
it separately. Connecting the sensor requires changing the thermostat base,
therefore wall-mounting becomes necessary.
•
Wi-Fi
Enables checking the MAC address of the device.
Pairing mode
•
It is used to establish the radio connection between the thermostat and the receiver.
| General | Details |
|---|---|
| Name | EUROSTER 4040 Smart Programmable Thermostat User Manual |
| Make | EUROSTER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.33 MB |
(1 votes, average: 5.00 out of 5)
Loading...
EUROSTER 2006TXRX Wireless Programmable Thermostat Installation Guide
EUROSTER 2026TXRX Air Conditioning Thermostat Instruction Manual
tekmar TEK564 Invita WiFi Thermostat User Manual
Danfoss TPOne-RF Electronic Programmable Room Thermostat Installation Guide
Thermostats BHT-8000RF Wireless Thermostat User Manual
Hotwire HWGL2 Dual Programming Thermostat Instructions
FantiniCosmi CH123E 230V Flush Mounting Thermostat Installation Guide
EMOS P56201UF Floor Heating Thermostat Instruction Manual
GENERAL LIFE SOLARA 330S Digital Room Thermostat User Manual
SOGEDIS 1001 MODEL UP Refrigerator Thermostat Instruction Manual
seitron 039790 WiFi WiTime Wall Programmable Thermostat User Guide
SALUS HTR-RF(20) Thermostat User Guide