Home > EPH CONTROLS > EPH CONTROLS RFRB RF Room Thermostat Instruction Manual
EPH CONTROLS RFRB RF Room Thermostat Instruction Manual
Page 1 of 2
Operating Instructions
RFRB - RF Room Thermostat
Contents
1. Factory default settings
2. Specification & wiring
3. Mounting
CAUTION!
Before commencing any work on the electrical
connections, you must first disconnect the device from
the mains. None of the 230V connections must be live
until the installation has been completed and the housing
is closed. Only qualified electricians or authorised service
staff are permitted to open the terminal box.
4. Installation
5. Button / symbol description
6. Resetting the thermostat
7. On / Off function
8. Lock function
9. To connect the RFRB thermostat to the
R_7-RF programmer
There are parts that carry mains voltage behind the cover.
The terminal box must not be left unsupervised when
open. (Prevent non specialists and especially children
from gaining access to it.)
10. To disconnect the RFRB thermostat from
the R_7-RF programmer
Ensure that this wireless enabled programmer is installed
1 Metre from any metalic object, television, radio or
wireless internet transmitter.
Important: Keep this document
Prior to setting the thermostat, it is neccessary to complete all required settings described in this
section.
5. Button / symbol description
1. Factory default settings
Wireless symbol
Temperature indicator:
Switching differential:
In built frost protection:
Keypad lock:
°C
Heating ON symbol
Room temperature
0.2°C
5°C
Off
Battery low symbol
On / Off button
Set point handwheel
2. Specifications & wiring
Power Supply:
2 x AAA Alkaline Battery
50 uA
Power consumption:
Battery replacement:
Temp. Control Range:
Dimensions:
Once per year
5...35°C
84 * 84 * 30mm
NTC 10K Ohm @ 25°C
°C
Temp. sensor:
Temp. indication:
Reset button Code button
3. Mounting
6. Resetting the thermostat
The mounting height should be 1.5 meters above the floor level. The
thermostat should be wall mounted in the room where the heating is to
be controlled.
Press the
button on the bottom of the thermostat, the front housing
will detach from the baseplate.
Insert the batteries into the thermostat.
The place of installation should be chosen so that the sensor can measure
the room temperature as accurately as possible.
Press the reset button on the PCB, ‘NO’will flash on the screen.
Rotate the hand wheel clockwise until ‘YES’appears on the screen.
Press the hand wheel once to confirm the setting.
Choose the mounting location to prevent direct exposure to sunlight or
other heating / cooling sources when mounted.
The thermostat has now been reset and the current temperature will
appear on the screen.
The unit can be fitted to:
1. Recessed conduit boxes
2. Surface mounting boxes
3. Directly on walls
4. Table mounting with stand provided
7. On / Off function
Press the On/Off button to turn the zone paired with the thermostat on
or off.
4. Installation
The paired zone of the programmer must be in the following states for
this function to operate:
Press the button on the bottom of the thermostat.
The front housing will detach from the baseplate.
Insert the batteries (provided) into the thermostat.
Mount the unit as described in section 3.
In permanently ON mode
In Allday mode and zone in ON
In Auto mode and zone is ON
Offer the baseplate up to the thermostat. Snap it into position to close.
If the zone is timed off or in permanently OFF mode the On/Off button on
the thermostat will not operate
EPH Controls Ireland
EPH Controls UK
20221108_RFRB_OpIns_PK
| General | Details |
|---|---|
| Name | EPH CONTROLS RFRB RF Room Thermostat Instruction Manual |
| Make | EPH CONTROLS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.11 MB |
(1 votes, average: 5.00 out of 5)
Loading...
EPH CONTROLS eTRV-HW Smart Cylinder Thermostat User Guide
EPH CONTROLS eTRV-HW Smart Hot Water Thermostat Instruction Manual
EPH CONTROLS eTRV Smart Radiator Thermostat Instruction Manual
EPH CONTROLS 20221026 RFRA – RF Room Thermostat Instruction Manual
EPH CONTROLS CDTP2 Hardwired Room Thermostat Instruction Manual
EPH Controls CDT2-24 24V Room Thermostat Installation Guide
EPH CONTROLS RFCA RF Cylinder Thermostat Instruction Manual
EPH CONTROLS PR092K7 RF Cylinder Thermostat Instruction Manual
EPH CONTROLS COMBIPACK2 Smart Thermostat with Automation and Optimum Start Instructions
EPH CONTROLS CRT2 Room Thermostat Instruction Manual
MClimate MC-LW-V02 Smart Radiator Thermostat User Manual
Uponor T-247 BUS Smatrix Base Thermostat Installation Guide
VIVE TP-S-855C Digital Programmable Thermostat Instruction Manual
INKBIRD ITC-306A Digital Thermostat User Manual
TIOEVO0003 TEVO Wireless Thermostat User Manual
Remotec REMEZTRVV01 Z Wave Thermostat User Guide
Honeywell Home CT50 Series Thermostat Owner’s Manual
ikon ITG-24 Thermostat Control User Manual
GENERAL LIFE 270S RF Room Thermostat User Manual
NEOMITIS PRG7 RF 7 Day Two Channel Programmer with RF Room Thermostat Instruction Manual