Home > EPH CONTROLS > EPH CONTROLS RDT Recessed Room Thermostat Installation Guide
EPH CONTROLS RDT Recessed Room Thermostat Installation Guide
P05 – Setback Mode
(0°C / Off)
*
*
To use the thermostat in Setback mode, please refer to page 6 of this guide.
Setback functionality can only be used in conjunction with a Programmer / Timeswitch.
When terminal 4 has 0V, the thermostat will operate in setback mode
and will reduce the setpoint by the setback temperature.
The setback is factory set to 0˚C and must be set from 1˚C to 10˚C to
enable this function to operate.
To access this setting, press and hold
&
together for 5
seconds. ‘P01’will appear on the screen.
Press
Press
until ‘P05’appears on the screen.
to select.
Setback temperature will begin to flash.
Press
Press
and
to set the Setback temperature from 0 to 10˚C.
to confirm.
Press
to return to normal operation.
When Setback mode is operating ‘SB’ will appear on the screen.
EPH Controls Ltd.
23
| General | Details |
|---|---|
| Name | EPH CONTROLS RDT Recessed Room Thermostat Installation Guide |
| Make | EPH CONTROLS |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.57 MB |

EPH CONTROLS eTRV-HW Smart Cylinder Thermostat User Guide

EPH CONTROLS eTRV-HW Smart Hot Water Thermostat Instruction Manual

EPH CONTROLS eTRV Smart Radiator Thermostat Instruction Manual

EPH CONTROLS 20221026 RFRA – RF Room Thermostat Instruction Manual

EPH CONTROLS CDTP2 Hardwired Room Thermostat Instruction Manual

EPH Controls CDT2-24 24V Room Thermostat Installation Guide

EPH CONTROLS RFCA RF Cylinder Thermostat Instruction Manual

EPH CONTROLS PR092K7 RF Cylinder Thermostat Instruction Manual

EPH CONTROLS COMBIPACK2 Smart Thermostat with Automation and Optimum Start Instructions

EPH CONTROLS CRT2 Room Thermostat Instruction Manual









































